cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
klarson
Advocate I
Advocate I

Trigger expession invalid

Hi, I'm looking for help.

 

I am trying to create a flow and can't figure out why my trigger expression is invalid.

 

I have 2 custom lists. The one is an invoice list, where incoming invoices get added to the sharepoint list as they arrive.  Here are the column headers for that list: 

klarson_0-1694107336461.png

 

The second list is a Master PO list, where I want to track the remaining value of my Purchase Orders. Here are the column headers on that list:  

klarson_1-1694107457873.png

 

The flow I'm trying to write will sum up the value of all invoices for a specific Purchase Order on the Invoice List and put that amount in the Sum of Approved Invoices on the PO List. I'll paste screen shots of the flow I've put together, and would appreciate any help I can get in getting it up and running!

Regards,

Kirstin

 

klarson_2-1694107662351.png

 

klarson_3-1694107724554.png

 

klarson_5-1694107825069.png

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
wskinnermctc
Super User
Super User

Ok I made an example flow and SharePoint lists. But I ask that you go look at this post about SharePoint Column InternalName and use that information to name your columns. This will help greatly with using references and expressions.

I think you should delete your list columns and recreate them to look more like my example. You can always change the display name after creating.

 

I made an example Purchase Order SharePoint list that has 2 purchase Orders:

Purchase Order Initial List ViewPurchase Order Initial List View

Here are the column types of the Purchase Order List:

Purchase Order List SettingsPurchase Order List Settings

 

Then I made an Invoice List with 3 Example Invoices:

Invoice Tracker with 3 submitted InvoicesInvoice Tracker with 3 submitted Invoices

Here are the column types of the Invoice SharePoint list:

Invoice List SettingsInvoice List Settings

 

The Invoice List has a Choice type column "InvoiceReviewStatus" that will be used to identify that status of a created invoice/item.

Invoice Review Status Choice ColumnInvoice Review Status Choice Column

 

So then when an Invoice is Reviewed, it can have the status changed to "Approved" in the choice column. See below I changed the status of the first invoice.1st Invoice Approved1st Invoice Approved

 

Any creation of an item or modification will trigger the flow, but it uses a Condition to check the column value of "InvoiceReviewStatus" to determine if the flow should continue or stop running.

Flow Overview All StepsFlow Overview All Steps

In the condition it is checking the InvoiceReviewStatus Value which is different than the InvoiceReviewStatus. Choice columns will have multiple dynamic content options. One of them is the Value which will just be the word, the other will be a different output showing the whole choice box that we don't want.

SharePoint Choice Column VALUESharePoint Choice Column VALUE

 

The second part of the flow is where there is a Get Items action that is getting all of the rows from the PurchaseOrders SharePoint list. Directly in the Get Items there is a Filter Query field that is being used to only get items with match Purchase Order Numbers.

 

The Filter Query is in the format of PurchaseOrderNumber equals the InvoicePurchaseOrderNumber.

Since the purchase order number are literally in a number value, the Filter Query format is:

ColumnName eq NumberValue

If the purchase order number was a text/string or trying to filter by another column the Filter Query format is:

ColumnName eq 'TextValue' 

If it is a text it needs ' single quotes around the value.

 

Flow Overview - Zoom Get Items and Update ItemsFlow Overview - Zoom Get Items and Update Items

 

 The Update Item step will add the amount of the new invoice to the Sum of Approved Invoices. This is basically taking the value from Get Items and adding it to the trigger Invoice Amount. 

 

add(items('Apply_to_each')?['SumofApprovedInvoices'],triggerOutputs()?['body/InvoiceAmount'])

 

 

The expression is put in the Expression fx box to be added into the field:

Add ExpressionAdd Expression

 

The remaining purchase order amount uses the previous add expression, but it also includes a subtract expression. The is getting the PurchaseOrderTotalCost and subtracting the SumofApprovedInvoices to get the remaining.

 

sub(items('Apply_to_each')?['PurchaseOrderTotalCost'],add(items('Apply_to_each')?['SumofApprovedInvoices'],triggerOutputs()?['body/InvoiceAmount']))

 

 

Here is the expression in the fx field:

Subtract ExpressionSubtract Expression

 

Here is the reference for how the expression (formulas) are created:

add() expression to sum values

subtract sub() expression  to subtract values

 

So here is the example of changing an invoice to submitted and then the result of the Purchase Order list:

Invoice List with First Invoice ApprovedInvoice List with First Invoice ApprovedPurchase Order List After First Invoice was ApprovedPurchase Order List After First Invoice was Approved

You can see the $1,550 InvoiceAmount was added to the Purchase Order List in the SumofApprovedInvoices and it was also subtracted from the RemainingPurchaseOrder column.

 

Here is the example after the remaining 2 invoices were changed to Approved:

Invoice List Remaining Invoices ApprovedInvoice List Remaining Invoices ApprovedPurchase Order List after All Invoices ApprovedPurchase Order List after All Invoices Approved

 

This is a very basic example. You can add features and functions to this all day, but I recommend getting the basic flow working and then building things on top of that.

 

Give this a try and let me know if it works for you. Please create new column names because it will make all of this much easier. See this post for why column names help.

View solution in original post

12 REPLIES 12
wskinnermctc
Super User
Super User

Why do you need to sum up ALL of the invoices values up update a single Purchase Order each time an Invoice is created or modified?

 

Wouldn't it be easier to have a flow that triggers when an Invoice status is changed to Approved that will add to the Purchase Order approved sum? So it is individually adding to the Purchase Order approved sum as the invoice is changed to approved.

Sure, I could possibly do that. I'd have to figure out how to write that flow--I'm new at this. But will that solve the invalid trigger expression problem? 

For the specific "trigger expression problem" I would need more information. Like being able to see the full expression you are using as well as what exactly the error message states.

 

For a separate flow that triggers only on Approved invoices, you need to tell me more about how an Invoice becomes Approved. Because your current example, if it worked, you expect the Purchase Order sum to be updated anytime an Invoice is created or modified. So I don't understand how you were differentiating an Approved invoice if the flow was going to trigger on all invoices.

klarson
Advocate I
Advocate I

I can provide that information.

Originally, I was using a condition "invoice approved for payment? is equal to yes", but it also resulted in an error message. So I changed it to invoice amount has a value just temporarily. But you are right--my intention is that once someone has reviewed the invoice and updates that field, a yes response would trigger the flow.

 

Here is the full expression I used to create the filter array: 

@equals(trigger(Outputs()?['body/Purchase Order/String'], item()?['Purchase Order/String'])

 

I think that is saying create a list of all the Purchase Orders in the nvoicing list that have a matching Purchase Order in the Purchase Order list.  I have tried replacing the word  "string" with "value," but it doesn't help. Both lists, for the Purchase Order columns, are defined as text.

 

Here is the error message I get:

klarson_0-1694118119567.png

I think that addresses all of your comments. Thanks for trying to help me!

 

 

 

wskinnermctc
Super User
Super User

Ok I made an example flow and SharePoint lists. But I ask that you go look at this post about SharePoint Column InternalName and use that information to name your columns. This will help greatly with using references and expressions.

I think you should delete your list columns and recreate them to look more like my example. You can always change the display name after creating.

 

I made an example Purchase Order SharePoint list that has 2 purchase Orders:

Purchase Order Initial List ViewPurchase Order Initial List View

Here are the column types of the Purchase Order List:

Purchase Order List SettingsPurchase Order List Settings

 

Then I made an Invoice List with 3 Example Invoices:

Invoice Tracker with 3 submitted InvoicesInvoice Tracker with 3 submitted Invoices

Here are the column types of the Invoice SharePoint list:

Invoice List SettingsInvoice List Settings

 

The Invoice List has a Choice type column "InvoiceReviewStatus" that will be used to identify that status of a created invoice/item.

Invoice Review Status Choice ColumnInvoice Review Status Choice Column

 

So then when an Invoice is Reviewed, it can have the status changed to "Approved" in the choice column. See below I changed the status of the first invoice.1st Invoice Approved1st Invoice Approved

 

Any creation of an item or modification will trigger the flow, but it uses a Condition to check the column value of "InvoiceReviewStatus" to determine if the flow should continue or stop running.

Flow Overview All StepsFlow Overview All Steps

In the condition it is checking the InvoiceReviewStatus Value which is different than the InvoiceReviewStatus. Choice columns will have multiple dynamic content options. One of them is the Value which will just be the word, the other will be a different output showing the whole choice box that we don't want.

SharePoint Choice Column VALUESharePoint Choice Column VALUE

 

The second part of the flow is where there is a Get Items action that is getting all of the rows from the PurchaseOrders SharePoint list. Directly in the Get Items there is a Filter Query field that is being used to only get items with match Purchase Order Numbers.

 

The Filter Query is in the format of PurchaseOrderNumber equals the InvoicePurchaseOrderNumber.

Since the purchase order number are literally in a number value, the Filter Query format is:

ColumnName eq NumberValue

If the purchase order number was a text/string or trying to filter by another column the Filter Query format is:

ColumnName eq 'TextValue' 

If it is a text it needs ' single quotes around the value.

 

Flow Overview - Zoom Get Items and Update ItemsFlow Overview - Zoom Get Items and Update Items

 

 The Update Item step will add the amount of the new invoice to the Sum of Approved Invoices. This is basically taking the value from Get Items and adding it to the trigger Invoice Amount. 

 

add(items('Apply_to_each')?['SumofApprovedInvoices'],triggerOutputs()?['body/InvoiceAmount'])

 

 

The expression is put in the Expression fx box to be added into the field:

Add ExpressionAdd Expression

 

The remaining purchase order amount uses the previous add expression, but it also includes a subtract expression. The is getting the PurchaseOrderTotalCost and subtracting the SumofApprovedInvoices to get the remaining.

 

sub(items('Apply_to_each')?['PurchaseOrderTotalCost'],add(items('Apply_to_each')?['SumofApprovedInvoices'],triggerOutputs()?['body/InvoiceAmount']))

 

 

Here is the expression in the fx field:

Subtract ExpressionSubtract Expression

 

Here is the reference for how the expression (formulas) are created:

add() expression to sum values

subtract sub() expression  to subtract values

 

So here is the example of changing an invoice to submitted and then the result of the Purchase Order list:

Invoice List with First Invoice ApprovedInvoice List with First Invoice ApprovedPurchase Order List After First Invoice was ApprovedPurchase Order List After First Invoice was Approved

You can see the $1,550 InvoiceAmount was added to the Purchase Order List in the SumofApprovedInvoices and it was also subtracted from the RemainingPurchaseOrder column.

 

Here is the example after the remaining 2 invoices were changed to Approved:

Invoice List Remaining Invoices ApprovedInvoice List Remaining Invoices ApprovedPurchase Order List after All Invoices ApprovedPurchase Order List after All Invoices Approved

 

This is a very basic example. You can add features and functions to this all day, but I recommend getting the basic flow working and then building things on top of that.

 

Give this a try and let me know if it works for you. Please create new column names because it will make all of this much easier. See this post for why column names help.

klarson
Advocate I
Advocate I

I have re-written the order of this flow, and think I'm a lot closer to getting it to work, but just need help now on the last step.

 

So, the new flow says when the Invoice list is modified and the Invoice Submitted value = yes, create a filter array for the Purchase Order value and compose it as the first array then update the PO List by matching the output of the array (which should be the purchase order number) and update the Sum of Approved Invoices field with the newly approved invoice amount.  I think what I'm missing is that amount, but I'm stuck on how to get it into this flow.  Here is a screenshot. The last function in the Sum of Approved Invoices reads "add(triggerOutputs()?['body/Amount'], outputs('Compose')?["Sum of Approved Invoices'])

 

klarson_1-1694125990959.png

 

 

The example I provided is what you should use. It is the least amount of steps to accomplish what you want.

klarson
Advocate I
Advocate I

  • Thank you, I will work on you instructions today!
klarson
Advocate I
Advocate I

Thank you so much for your very helpful reply. I really appreciate that you took the time to provide me with lots of learning resources, and explained each step.  It took me a little time to re-create the two lists, but once I did that, I followed your instructions and created the flow.  It ran successfully, but resulted in one glitch. In the PO Tracker Sum Invoiced field, it recorded double the amount that I approved in the invoice list.  Any idea why?  

 

Again, thank you so much for the excellent instruction. I'm so appreciative for your clear, easy to follow tutorial!

Here are some screenshots of the results:

klarson_0-1694196574184.png

klarson_1-1694196630296.png

klarson_2-1694196737284.png

klarson_3-1694196805631.png

klarson_4-1694196842486.png

klarson_5-1694196890623.png

klarson_6-1694196942138.png

 

 

 

 

 

This works perfectly.  Ignore my question about the doubling of the total invoiced amount--the flow ran twice. I've added several additional test invoices, and it is performing exactly as I was hoping. You are amazing!!!

Glad you got it working 👍

 

You can go change the column display name and it won't be a run together words, but the Internal Name of the column will always stay the same.

For example if rename your column "ApprovalDate" to "Date Invoice Approved", the InternalName will always be "ApprovalDate" to use in your flow, but what is displayed on the list will be "Date Invoice Approved".

 

One more thing:

Can go up to my previous reply that has all of the instructions and screenshots and mark that Accept as Solution so this will be resolved?  It will make it easier for others to find the solution, and I get those sweet fake internet points!

Helpful resources

Announcements

Summer of Solutions | Week 3 Results | Win free tickets to the Power Platform Conference

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22  

Copilot Cookbook Challenge | WINNERS ANNOUNCED | Win Tickets to the Power Platform Conference

We are excited to announce the "The Copilot Cookbook Community Challenge random winners have been selected for the Challenge.  Thank you to everyone who participated in this challenge.    Copilot Cookbook Gallery:Power Apps Cookbook Gallery: 1. @swaminawale  1. @renatoromao     2.  @SpongYe  2.   @nickpotts10  *Please note if for any reason a winner declines, we will have another random drawing.   Check out all of the Cookbook Submissions: 1. Copilot Studio Cookbook Gallery: https://aka.ms/CS_Copilot_Cookbook_Challenge 2. Power Apps Copilot Cookbook Gallery: https://aka.ms/PA_Copilot_Cookbook_Challenge   There will be 5 chances to qualify for the final drawing: Early Bird Entries: March 1 - June 2Week 1: June 3 - June 9Week 2: June 10 - June 16Week 3: June 17 - June 23Week 4: June 24 - June 30WINNERS ANNOUNCED - JULY 8th     At the end of each week, we will draw 5 random names from every user who has posted a qualifying Copilot Studio template, sample or demo in the Copilot Studio Cookbook or a qualifying Power Apps Copilot sample or demo in the Power Apps Copilot Cookbook. Users who are not drawn in a given week will be added to the pool for the next week. Users can qualify more than once, but no more than once per week. Four winners will be drawn at random from the total qualifying entrants. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once. If they are drawn multiple times, another user will be drawn at random. Prizes:  One Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value, does not include travel, lodging, or any other expenses) Winners are also eligible to do a 10-minute presentation of their demo or solution in a community solutions showcase at the event. To qualify for the drawing, templates, samples or demos must be related to Copilot Studio or a Copilot feature of Power Apps, Power Automate, or Power Pages, and must demonstrate or solve a complete unique and useful business or technical problem. Power Automate and Power Pagers posts should be added to the Power Apps Cookbook. Final determination of qualifying entries is at the sole discretion of Microsoft. Weekly updates and the Final random winners will be posted in the News & Announcements section in the communities on July 29th, 2024. Did you submit entries early?  Early Bird Entries March 1 - June 2:  If you posted something in the "early bird" time frame complete this form: https://aka.ms/Copilot_Challenge_EarlyBirds if you would like to be entered in the challenge. Early Bird Submissions: @renato Week 1 Results:  Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1.  @Mathieu_Paris 1.   @SpongYe 2.  n/a2.   @Deenuji 3.  n/a3.   @Nived_Nambiar  4.  n/a4.   @ManishSolanki 5.  n/a5.    n/a   Week 2 Results:  Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Kasun_Pathirana1. ManishSolanki2. cloudatica2. madlad3. n/a3. SpongYe4. n/a4. n/a5. n/a5. n/a     Week 3 Results:  Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Parul_Yadav_Neo1. n/a2. SpongYe2. n/a3. n/a3. n/a4. n/a4. n/a5. n/a5. n/a   Week 4 Results:  Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. @nickpotts10  1. @ShrushtiShah  2. @Suniti_0020 2. @swaminawale 3. n/a3. @farukhis786 4. n/a4. @ManishSolanki  5. n/a5.  n/a

Important Update for Community Platform Access | READ ONLY July 16-22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Tuesday Tip | How to Become a Community Blog Author

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   This Week's Topic: How to Become a Community Blog Author We want YOU to be part of the community blog! Sharing your knowledge of Power Platform is an essential part of our community! Here's why:   It helps create a vibrant and dynamic community of makers who can learn from each other’s experiences and insights.It provides a platform for collaboration and innovation, where members can share their ideas and work together to develop new solutions.It helps promote Power Platform by showcasing its capabilities and real-world applications.It helps build trust and credibility in the community because you are providing valuable information and resources your fellow community members can use to improve their skills and knowledge. By sharing your knowledge of Power Platform in the community blog, you help us create a more engaged and informed community, better equipped to tackle complex challenges. To get started with blogging across the Power Platform communities, please visit the following links:   Power Apps: https://powerusers.microsoft.com/t5/Power-Apps-Community-Blog/bg-p/PowerAppsBlog Power Automate: https://powerusers.microsoft.com/t5/Power-Automate-Community-Blog/bg-p/MPABlog Copilot Studios: https://powerusers.microsoft.com/t5/Power-Virtual-Agents-Community/bg-p/PVACommunityBlogPower Pages: https://powerusers.microsoft.com/t5/Power-Pages-Community-Blog/bg-p/mpp_blog   When you follow the link, look for a button like the one below on the right rail of your community blog, and let us know you're interested. We can't wait to connect with you and help you get started. Thanks for being part of our incredible community--and thanks for becoming part of the community blog!  

June 2024 Community Newsletter

It's time for the June Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzcreativeopinionExpiscornovus Fubar AmikNived_NambiarPstork1OliverRodriguesmmbr1606ManishSolankifernandosilvaragavanrajanBCBuizerExpiscornovusrenatoromaoLucas001timlAlexEncodianViswavEmadBeshaiDBO_DVDeenujiUmiantaChrist0fGochixVishnuReddy1997citron-trucmandelaVishalJhaverieetuRoboJohanTprathyooanandm08VictorIvanidzenicoxrfm1964shashankbhidepaulbeck1 rpaa   LATEST NEWS Summer of Solutions 2024 The Summer of Solutions challenge kicked off this month - an amazing Microsoft Community initiative to win free tickets to the Power Platform Community Conferencethis September in Las Vegas. The challenge is NOW OPEN to all #PowerPlatform community members and will consist of four weekly entry periods until July 14th, 2024. Click the image below to find out more on how you can win free tickets to #PPCC24 by entering the Summer of Solutions TODAY!   Microsoft Customer Stories We're constantly working with an array of great businesses across the globe to assist them in taking advantage of the latest business applications technology. If you'd like to find out more about their low code journeys, click the image below to view our playlist of Customer Stories to discover how Accenture, Lumen Technologies, Cineplex, and many more, are streamlining their business processes with Microsoft Power Platform.     Microsoft Leap Program Have you heard of Microsoft Leap - a global program designed to recruit, develop, and upskill unconventional talent for careers in the tech space. Microsoft Leap organizes a number of pathways into the industry, including the recent "NFL Legend Cohort - Technical Program Management" run jointly with the NFL Player Care Foundation (PCF) who are dedicated to helping retired players improve their quality of life. Click the image below to find out more about the great day shared at the Redmond campus and be sure to visit the Microsoft Leap website to discover how this amazing initiative is helping re-launch the lives of countless individuals. www.leap.microsoft.com       UPCOMING EVENTS Biz Apps Partner Summit | Seattle | July 24-25 It's not long now until the Biz Apps Partner Summit, which takes place at the Hilton Bellevue in Seattle on July 24-25, 2024. This event is the perfect place to network, connect, and learn how to scale your Microsoft practice, drive profitable revenue, and dazzle your customers! There's a great selection of speakers, including the likes of Tom Patterson, Donald Kossmann Joseph Corigliano, Cecilia Flombaum, Peter Jensen, John Siefert, Becky Lymberis, Daniel Rippey, and many more. Click the image below to find out more and register today!     TechCon365 & Power Platform Conference | D.C. | August 12-16 Things are hotting up for the next TechCon365 & PWRCON Conference in Washington D.C. on August 12-16, 2024. Featuring the likes of Tamara Bredemus, Sunny Eltepu, Lindsay Shelton, Brian Alderman, Daniel Glenn, Julie Turner, Jim Novak, John White, Jason Himmelstein, Luc Labelle, Emily Mancini, MVP, UXMC, Fabian Williams, Emma Wiehe,and many more, this is the perfect event for those that are looking to gain invaluable insights from industry experts. Click the image below to grab your tickets today!     Power Platform Community Conference | Vegas | Sept. 18-20th Are you ready to come and join the fun in Las Vegas this September at PPCC24? This event is the perfect place to connect with fellow business applications enthusiasts and share your knowledge with the worldwide Microsoft Community. Now's your chance to hold all the aces. Just click the image below to find out more and we hope to see you go ALL-IN this September in Las Vegas!     For more events, click the image below to visit the Community Days website.  

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (5,154)