Showing results for 
Search instead for 
Did you mean: 

We are unable to find the site address. Please try selecting a site address from the dropdown.

I am attempting to build some very simple FLOWS in SharePoint. When I attempt to setup the trigger my site does not appear in the drop down even though I have the site open in another tab. Only 1 of the sites I have created appears in the list but not the one I need. When I attempt to manually enter the site url I get the following error;

We are unable to find the site address. Please try selecting a site address from the dropdown.


I have tested the manually entered url by copying it to the address bar of a browser. - I access the site every time

My site URL is

Flow cannot see this site at all. In fact flow will not allow me to proceed any further. 

Community Support
Community Support

Hi @lmartini,


Thanks for feedback.

What’s your current situation? Are you still having the issue?

Could you use the site addresses before?

Please make sure you are using the right site URL.

By the way, could you try to create a flow for a list or library in SharePoint Online? Please take a try with it to see if the site address will be populated automatically.

Please check the following doc for more details:

Please feel free post back if you are still having the issue.


Best regards,


Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

All of this activity is in SharePoint Online.


I was able to access the site addresses last week. All of my sites appeared in the drop down.


This situation occurs when I attempt to create new Flows. The first step is to insert the trigger. The trigger I was using was When a file is created or modified. I also tried to use the “properties only” version of this as well. The first parameter that must be provided is the site. When I attempt to use the drop down only one of my sites appears ( not the correct one). When I attempt enter the url of the correct site the insertion point jumps back and forth in the entry line. I have to watch very carefully as I enter the url to make sure that the insertion point is at the end of the entry. After I have completed the url entry, nothing else works in the Flow. When I insert the table name Flow errors out again and says it can’t find the table. I know the url entry is correct because I copy it into the address line of another tab of my browser and press enter. I am able to access the site.


Hi @lmartini,


Could you try to recreate the connection to see if it will work?

The issue could not be reproduced by me.

If you are still having the issue, please feel free post back. 


Best regards,


Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

I am having the exact same issue. Today in SharePoint Online I created a new site from the Modern admin center. The URL to the site is I then created a custom list on that site which is what I am setting up my flow for. My site does not show up in the drop down, I have tried typing in the address manually and copy and pasting it. Same thing every time. "We are unable to find the site address. Please try selecting a site address from the dropdown".  Please help

Hi, I have the same issue.

I am attempting to build some very simple FLOWS in SharePoint. When I attempt to setup the trigger my site does not appear in the drop down even though I have the site open in another tab. How did the issue being resolved?  Can anyone let me know. 

thank you very much in advance!

Not applicable

same happens to me! 


Please help us with a solution 🙂 

Advocate I
Advocate I

Same here. I have a lot of sites, two of them have almost identical URLs. The first one appears in the drop down and I can make the flow no problem. The second though does not appear in the drop-down and even though the difference in the name and the URL is a single letter, after editing the site is not accepted. Very frustrating...


I also find it confusing that the name of the site seems to be required as well as the URL.

Advocate I
Advocate I

UPDATE: I have since found that if I open the site and click on a few pages therein, the site now becomes visible in the drop-down. I guess the system is trying to be clever and show us only the most recently used top 10-15 sites? We have hundreds of sites so it would be nice to have some other way of populating...a search perhaps? 

Most Valuable Professional
Most Valuable Professional

Hi @lmartini 


Could you try the below?


Under the SharePoint action step where you enter the site name click the Dynamic content and enter the site name manually. Save the flow. Generally it should resolve the site name correctly.





Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up

Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

thanks @omoroi I knew this was a bug! and you found it 🙂 thanks!!


Thanks @omoroi its worked for me as well.

Make sure the data connection used have access to the site. Else please switch the data connection to other ID

I am receiving this message as well with a bit of a twist. 


Backstory: There are two connections used for Power Automate flows - one based on my email - and one created specifically for Power Automate - We've been using the Power Automate connection in our flows for over a year without issue.


Yesterday, I was trying to modify a flow (change the trigger) and started receiving the "We are unable to find the site address. Please try selecting a site address from the dropdown." There is nothing available in the dropdown and the same message appears when I try to enter a Custom Value. Now, the weird thing is that even though the message appears, it DOES link to the site because present the list/libraries from that site.


Whether or not it links, I can't get the message removed and I cannot save the flow.


I've gone through various support solutions and have tried to refresh the site, have gone to the site and went through pages, even tried using another SharePoint site without success. I've even copied the site info from another working flow and it still doesn't work.


Other proposed solutions were to a) change the connection or b) create a new connection. When I used the connection based on my email (the Power Automate is the default connection) and when I created a new connection I still get the same issue. 


Any ideas?



It works! Thank you!

Our site was renamed, and Power Automate didn't like the old site name.  I had to delete and recreate the action with the new site name (via "Enter custom value") to get the Flow to save.  Not the best solution, but hopefully that sheds light on another solution method.

Frequent Visitor

I've run into this issue several times, and it's hugely frustrating! What I've found is the solution lies in two places:

  1. Make sure the account the owns the connections has full control of the site.
  2. Make sure that same account is following the site you need to access.

I typically use a service account (m365service@...) to manage the connections, and be one of the Flow owners, so that means I have to remember to use that account to log in to SharePoint and follow the site, and make sure that account is in the Owners permission group with Full Control of that site.


I hope that helps someone else.



Frequent Visitor

It's not even 5 years since the start of the thread, and the issue still persists. Good job Microsoft. 

Anyway pasting the site address and saving the flow even with error works. The error disappears after the flow is saved. 

Not applicable

I was facing the same issue with a SP site not appearing in the action connection (Create File) in the “Site Adress” dropdown list in Power Automate and I just managed to add it. It appears, at least in my case, the user needs to be part of the SharePoint site owner's permission list.
The site was attempting to connect was first created in Teams thus owners of this Team site are part of the Owner's Team Group (as a group) but the owners are not added individually to the SharePoint site that is automatically created along when creating the Teams site. So, I tried adding my user to the owner's group directly in SP site.
1. I went to the SharePoint site/settings/site permissions/ advance permission settings.
2. Added my username to the owner's group and save it.
At first it seemed it did not work but had to wait for a few mins for it to sync (perhaps) and then had to save my flow and close and open it again. Then there it was the SP site in the dropdown list. It was beautiful lol.

I hope it works for some of you. 

I confirm that after following the SharePoint site, it appears in the list 😀

Helpful resources


Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (1,807)