cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

error importing flow

I have a flow that works great in a sandbox environment.  I am unable to import it into another sandbox environment - I get an error:

 

Flow client error returned with status code "BadRequest" and details "{"error":{"code":"FlowMissingConnection","message":"The flow is missing a connection for api 'shared_office365'. Reauthenticate the connection or remove from the flow and re-save."}}".

 

(This message is found in the ErrorText column of the Components tab in the import log).

 

I don't know how to fix this.  Has anyone experienced this and have ideas on how to fix?

 

2 ACCEPTED SOLUTIONS

Accepted Solutions

@Anonymous 

 

So solutions are great!

 

However I have had some troubles with Importing them with Flows in the past.

For one you need to have elevated permissions in the target environment.

 

What I do is only have the flows in the solution if absolutely necessary. Even if you have a CDS (Current Environment) Connector being used. You can save the flow as Save As and take outside the solution before importing into the target env.

 

That being said. Once MS Team has the tools to have full ALM inside DevOps pipelines (Which only work with solutions) that is when I will be only using solutions. Than solutions will be the only way to go  


Did I answer your question? Mark my post as a solution!

If you like my post please hit the Thumbs Up


Proud to be a Flownaut!


Check out my blog for Power Automate tips,
tricks, and guides
FlowAltDelete





View solution in original post

Anonymous
Not applicable

Yeah, wow, that worked!  I imported the solution, opened the flow and did a 'save as' to pull it out of the solution.  Then, I was able to publish and turn it on.  Thank you, thank you.

 

I really appreciate the assistance.   There is a lot of information available about how to do things with Automate or Dynamics - but not so much about how to figure out what's wrong when things don't work.

 

(You wouldn't have experience with pulling the url of a Dynamics page, using CDS, into a flow would you?)

View solution in original post

9 REPLIES 9
v-alzhan-msft
Community Support
Community Support

Hi @Anonymous ,

 

The error message told that the flow miss connection?

Have add connection to actions in the flow when you import the flow?

You need to select a connection during import flow.

1.png

 

Best Regards,

Alice

 

Community Support Team _ Alice Zhang
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Anonymous
Not applicable

Thank you!

 

I'm not familiar with the screen you're showing here.  How did you access it?

Hi @Anonymous 

 

How are you trying to get the flow into the other Environment?

 

The steps should be:

=> Export Flow

=> Import Flow

 

Check out this awesome video from Jon L:

https://www.youtube.com/watch?v=K7_xWJvEPUc


Did I answer your question? Mark my post as a solution!

If you like my post please hit the Thumbs Up


Proud to be a Flownaut!


Check out my blog for Power Automate tips,
tricks, and guides
FlowAltDelete





Anonymous
Not applicable

Thank you!  I see now that Alice, in the earlier response, was not using a solution to export/import.  I was told to use solutions for flows!

 

Right now, I'm fighting between managed/unmanaged solutions.  Neither is working when I get to the target environment.  I cannot publish the solution once I get there (whether managed or unmanaged).

 

Do you recommend NOT using a solution?

 

Jon Levesque comments about another video that uses solutions, but who knows yet if that really applies to what I'm doing...

@Anonymous 

 

So solutions are great!

 

However I have had some troubles with Importing them with Flows in the past.

For one you need to have elevated permissions in the target environment.

 

What I do is only have the flows in the solution if absolutely necessary. Even if you have a CDS (Current Environment) Connector being used. You can save the flow as Save As and take outside the solution before importing into the target env.

 

That being said. Once MS Team has the tools to have full ALM inside DevOps pipelines (Which only work with solutions) that is when I will be only using solutions. Than solutions will be the only way to go  


Did I answer your question? Mark my post as a solution!

If you like my post please hit the Thumbs Up


Proud to be a Flownaut!


Check out my blog for Power Automate tips,
tricks, and guides
FlowAltDelete





Anonymous
Not applicable

Yeah, wow, that worked!  I imported the solution, opened the flow and did a 'save as' to pull it out of the solution.  Then, I was able to publish and turn it on.  Thank you, thank you.

 

I really appreciate the assistance.   There is a lot of information available about how to do things with Automate or Dynamics - but not so much about how to figure out what's wrong when things don't work.

 

(You wouldn't have experience with pulling the url of a Dynamics page, using CDS, into a flow would you?)

@Anonymous 

That is awesome 😀

 

Please mark my post as your solution if I solved your problem. For your other question. I recommend, creating a new post, this will ensure others with same issues are able to find it.

 

If you want, you can also tag me in the post, and I can try to assist.

 

Thanks 


Did I answer your question? Mark my post as a solution!

If you like my post please hit the Thumbs Up


Proud to be a Flownaut!


Check out my blog for Power Automate tips,
tricks, and guides
FlowAltDelete





mbk
Frequent Visitor

I have exactly the same problem.

(I have a solution with a lot of flows - when I import the solution I get this error for every flow that uses the Office 365 Outlook connector e.g. to send an email)

 

What I would like to know is if this is really the expected behavior?

 

- Is it really to be expected that a solution will not work after importing to a new environment, if the solution contains Flows that uses the Office 365 Outlook connector? I have tried to create the connections in the target environment before importing the solution, but I still get the error?

 

Kind regards

Michael

 

charles_ross_oh
Helper II
Helper II

In my case I had to open up the machine connection (in the cloud flow, under Data > Connections) within the imported flow and re-enter the machine group and login credentials, because (as the warnings say) moving to the different environment will break any connections from the original environment.

charles_ross_oh_0-1626806991871.png

 

One of the things that makes an environment unique is a specific machine group name.

Helpful resources

Announcements

Announcing Power Apps Copilot Cookbook Gallery

We are excited to share that the all-new Copilot Cookbook Gallery for Power Apps is now available in the Power Apps Community, full of tips and tricks on how to best use Microsoft Copilot as you develop and create in Power Apps. The new Copilot Cookbook is your go-to resource when you need inspiration--or when you're stuck--and aren't sure how to best partner with Copilot while creating apps.   Whether you're looking for the best prompts or just want to know about responsible AI use, visit Copilot Cookbook for regular updates you can rely on--while also serving up some of your greatest tips and tricks for the Community. Our team will be reviewing posts using the new "Copilot" label to ensure we highlight and amplify the most relevant and recent content, so you're assured of high-quality content every time you visit. If you share a post that gets featured in the curated gallery, you'll get a PM in the Community to let you know!The curated gallery is ready for you to experience now, so visit the new Copilot Cookbook for Power Apps today: Copilot Cookbook - Power Platform Community. We can't wait to see what you "cook" up!    

Tuesday Tips: Getting Started in the Community

TUESDAY TIPS is back!   This weekly series of posts is our way of sharing helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! The original run of Tuesday Tips was a highlight of last year, and these all-new Tips will hopefully prove to be just as informative as helpful. We will cover some basics about the Community, a few "insider tips" to make your experience even better, and sharing best practices gleaned from our most active community members and Super Users. Make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   THIS WEEK: I'm Brand New! What Do I Do? The number of new community members we have each week is pretty amazing, and we are so glad to welcome all of you to the Community! You may be wondering. "What do I do? Where do I get started? Will anyone be willing to help me? What I have a question? Help!"   Let's start with this: Welcome to the low-code revolution, and more importantly, welcome to the Power Platform Community! This is a great place to start. Whether you're busy with Power Apps, getting familiar with Power Automate, engaging Copilot Studio, or building in Power Pages, there are a few key places you should check out as you begin your journey: FORUMS: The forums are THE place to ask questions, look at questions asked by other Community members—and see answers and solutions from our Super Users and other helpful people in the Community. Power Apps ForumsPower Automate ForumsCopilot Studio ForumsPower Pages Forums   NEWS & ANNOUNCEMENTS: Our News & Announcements section highlights the newest and greatest updates in the Community, news from the product team, and so much more. It’s updated a few times each week and will also help you find ways to connect with what’s going on in the ever-growing world of Power Platform. Power Apps News & AnnouncementsPower Automate News & AnnouncementsCopilot Studio News & AnnouncementsPower Pages News & Announcements   GALLERIES: The Galleries section of the Community features tons of tips and tricks, features and benefits, and more—through videos created by our Super Users, product teams, and other helpful members of the Community. Power Apps GalleriesPower Automate Galleries Copilot Studio GalleriesPower Pages Galleries BLOGS: The community blogs section is full of handy step-by-step tips from members of the Community—and some of them include detailed answers to some of the questions most frequently asked questions, as well as how they solved a problem they faced. Power Apps Community BlogPower Automate Community BlogCopilot Studio Community BlogPower Pages Community Blog POWER UP PROGRAM: If you’d like to really take a huge step forward in your journey, we recommend checking out the Power Up Program, a Microsoft-sponsored initiative that trains new Power Platform users and has been a huge success since it launched a little over a year ago. There’s a waiting list, so definitely apply soon if you’re interested! Find out more here: Microsoft Power Up Program for career switchers.   There's so much more you'll discover in your Power Platform experience, and this Community is here for YOU! We are glad you've discovered us and can't wait to see where you grow! If you're new to the Community and just getting started, make sure to give this post a kudo and introduce yourself so we can welcome you!

Super User of the Month | Drew Poggemann

As part of a new monthly feature in the Community, we are excited to share that Drew Poggemann is our featured Super User for the month of February 2024. If you've been in the Community for a while, we're sure Drew's name is familiar to you, as he is one of our most active contributors--he's been a Super User for five consecutive seasons!   Since authoring his first reply 5 years ago to his 514th solution authored, Drew has helped countless Community members with his insights and expertise. In addition to being a Super User, Drew is also a User Group leader and a Microsoft MVP. His contributions to our Super User sessions and to the new SUIT program are always welcome--as well as his sense of humor and fun-loving way of sharing what he knows with others.   When Drew is not solving problems and authoring solutions, he's busy overseeing the Solution Architecture team at HBS, specializing in application architecture and business solution strategy--something he's been doing for over 30 years. We are grateful for Drew and the amazing way he has used his talent and skills to help so many others in the Community. If you are part of the SUIT program, you got to hear some great tips from Drew at the first SUIT session--and we know he still has much more to share!You can find him in the Community and on LinkedIn. Thank you for all you do, Drew!

Celebrating a New Season of Super Users with Charles Lamanna, CVP Microsoft Business Applications

February 8 was the kickoff to the 2024 Season One Super User program for Power Platform Communities, and we are thrilled to welcome back so many returning Super Users--as well as so many brand new Super Users who started their journey last fall. Our Community Super Users are the true heroes, answering questions, providing solutions, filtering spam, and so much more. The impact they make on the Communities each day is significant, and we wanted to do something special to welcome them at our first kickoff meeting of the year.   Charles Lamanna, Microsoft CVP of Business Applications, has stressed frequently how valuable our Community is to the growth and potential of Power Platform, and we are honored to share this message from him to our 2024 Season One Super Users--as well as anyone who might be interested in joining this elite group of Community members.     If you want to know more about Super Users, check out these posts for more information today:    Power Apps: What is A Super User? - Power Platform CommunityPower Automate: What is A Super User? - Power Platform Community Copilot Studio: What is A Super User? - Power Platform Community Power Pages: What is A Super User? - Power Platform Community

Super Users 2024 Season One is Here!

   We are excited to announce the first season of our 2024 Super Users is here! Our kickoff to the new year welcomes many returning Super Users and several new faces, and it's always exciting to see the impact these incredible individuals will have on the Community in 2024! We are so grateful for the daily difference they make in the Community already and know they will keep staying engaged and excited for all that will happen this year.   How to Spot a Super User in the Community:Have you ever written a post or asked for help in the Community and had it answered by a user with the Super User icon next to their name? It means you have found the actual, real-life superheroes of the Power Platform Community! Super Users are our heroes because of the way they consistently make a difference in the Community. Our amazing Super Users help keep the Community a safe place by flagging spam and letting the Community Managers know about issues. They also make the Community a great place to find answers, because they are often the first to offer solutions and get clarity on questions. Finally, Super Users share valuable insights on ways to keep the Community growing, engaging, and looking ahead!We are honored to reveal the new badges for this season of Super Users! Congratulations to all the new and returning Super Users!     To better answer the question "What is a Super User?" please check out this article: Power Apps: What is A Super User? - Power Platform CommunityPower Automate: What is A Super User? - Power Platform Community Copilot Studio: What is A Super User? - Power Platform Community Power Pages: What is A Super User? - Power Platform Community

Microsoft Power Platform | 2024 Release Wave 1 Plan

Check out the latest Microsoft Power Platform release plans for 2024!   We have a whole host of exciting new features to help you be more productive, enhance delegation, run automated testing, build responsive pages, and so much more.    Click the links below to see not only our forthcoming releases, but to also try out some of the new features that have recently been released to market across:     Power Apps  Power Automate  Copilot Studio   We can’t wait to share with you all the upcoming releases that will help take your Power Platform experience to the next level!    Check out the entire Release Wave: Power Platform Complete Release Planner 

Users online (8,857)