cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
MWAN
Helper II
Helper II

power automate get files (properties) only filter query not working

I tried to limit the get files (properties) only action to return only files under the current document set name. For example, I have a document set named DocumentRequest/MIKE 6-25 VERSIONING TEST_2020-6-25 14_21_12, which has 2 files.

 

the filter query should return just those two files.   I put FullPath eq FullPath from dynamic content as the filter query.

FullPath is the property in the json file returned from get files (properties) only action. 

 

2020-06-28_16-54-08.jpg

 

Keep getting error,  what is not right here?

2020-06-28_16-50-16.jpg

 

1 ACCEPTED SOLUTION

Accepted Solutions

Finally, I got it working, after many trials and errors. No good documentation about how it should work. 

 

1. In GetFiles(Properties only) the filter query should  be: ID equal 150
ID is literal, can't use ID from dynamic content; 150/number can't use single quote (but the text value need single quote!)

property with {} in response content can't be used.

 

2. Use RequestName (property in the response content) to match requestname column in Dynamic Content to filter down to the current document set and its files

 

2020-07-03_17-34-55.jpg

View solution in original post

10 REPLIES 10
abm
Most Valuable Professional
Most Valuable Professional

Hi @MWAN 

 

It could be the slash in your FullPath creating the issue.

 

Try encode the FullPath value by using an expression encodeUriComponent.
 
Thanks


Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

Thanks for checking.

 

I have two fullpath in the filter query, which one you referred to?

How to encode the FullPath value by using an expression encodeUriComponent? Please give an example.

 

Appreciated!

abm
Most Valuable Professional
Most Valuable Professional

Hi @MWAN 

 

Add a compose and add the expression. Please see below.

 

First click the expression then type encodeUriComponent(). Next click Dynamic Content and select FullPath.

image.png



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

I used the encodeURIComponent() in Compose, still failed

 

2020-06-29_17-22-22 action.jpg2020-06-29_17-20-49-error.jpg

abm
Most Valuable Professional
Most Valuable Professional

Hi @MWAN 

 

You need single quotes after the equal in your filter query.

 

Thanks



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

Sorry, still failed... wrap single quote around fullpath after eq

 

The expression "DocumentRequest%2FGeorge%20testing%200629_2020-6-29%2010_29_45 eq 'DocumentRequest/George testing 0629_2020-6-29 10_29_45'" is not valid. Creating query failed.

 

DocumentRequest%2FGeorge%20testing%200629_2020-6-29%2010_29_45 won't match 'DocumentRequest/George testing 0629_2020-6-29 10_29_45'

abm
Most Valuable Professional
Most Valuable Professional

Hi @MWAN 

 

Thanks for the screen share. You won't be able to do the ODATA filter for the below file properties. Not sure what object type these are. You can do the filter by ID. 

 

image.png

 

If you would like to filter by path using the ODATA filter query then use a custom column to update the path using another flow and use this new custom column to filter your results. This may works for you.

 

Thanks



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

The response data has id property so I put ID(dynamic content) eq '150' but still got an error: The query is not valid.

 

My purpose is to get the ID item property of the file items under a document set using Filter Query in Get Files (properties) only action.

 

 

abm
Most Valuable Professional
Most Valuable Professional

Hi @MWAN 

 

 

Could you try without the single quotes? If that doesn't work please post a screenshot of your flow?

 

Thanks



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

Finally, I got it working, after many trials and errors. No good documentation about how it should work. 

 

1. In GetFiles(Properties only) the filter query should  be: ID equal 150
ID is literal, can't use ID from dynamic content; 150/number can't use single quote (but the text value need single quote!)

property with {} in response content can't be used.

 

2. Use RequestName (property in the response content) to match requestname column in Dynamic Content to filter down to the current document set and its files

 

2020-07-03_17-34-55.jpg

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (1,991)