cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Highlighted
Titortian
Level: Powered On

Content not displaying in published version of App

All,

 

Note1: This is the second time I am posting this. The first time for some unknown reason it was flagged as spam which makes no sense, as it if anything could be considered a bug report.

Note2: Sorry for the gaps in formatting I have tried to remove them every way I can but the forum software keeps putting lines in between multiple types of content.
I am having an issue where a variable is not displaying in the published version of my app.
In my work space I am having no issues, in the published version I am.

Work space:

Workspace001.png

Published:

Published001.png

 

In the published version the same variable is being used on another screen and is not having any issues:

Published002.png

The '6' is the set variable.
Code excerpts:
Setting of variable.

CodePic001.png

 

 

Set(
    vSANNodeQtyAlpha,
    vSANStartServerQtyEntry
);

 

 

 

Variable: vSANNodeQtyAlpha
'vSANStartServerQtyEntry' is the text entry box on the left in the image.

 

The next section is:

 

 

Set(
    vSANOpticsQtyAlpha,
    vSANNodeQtyAlpha * "4"
);

 

 

This is also important as this uses the variable in it and is used on the next sheet which is a copy of the sheet where things are not working but where every reference to 'Node' is replace with 'Server' in naming and declaration.

 

Use of the variable where it is not working in published version.

 

 

"Based on current settings " & vSANNodeQtyAlpha & " servers will be requested."

 

 

Workspace002.png

Secondary Use of variable where it is not working in published version.

 

 

"Please provide quote based on attached BoM for " & vSANNodeQtyAlpha & " Servers. Please use the " & !!!variableomittedforclientconfidentiality!!! & " sheet."

 

 

Workspace003.png

Use case of variable where it IS working in published version.

 

 

"You have set " & vSANNodeQtyAlpha & " Servers, please proceed."

 

 

Workspace004.pngExample of next sheet where the same use case is in play with the derived variable.

 

 

"Based on current settings " & vSANOpticsQtyAlpha & " optics will be requested."

 

 

Workspace004.png

Picture of this in use:

Published003.png

I have gone through the following also.
Saved --> Publish
Save As (New Name) --> Publish
Publish --> Overwrite
Duplicated Sheet --> Saved --> Publish
None of these have helped.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Community Support Team
Community Support Team

Re: Content not displaying in published version of App

Hi @Titortian ,

Do you mean that the global variable (vSANNodeQtyAlpha) does not work in your published app in one screen but work in another screen?

 

Based on the issue that you mentioned, I think this issue may be related to vSANNodeQtyAlpha initialization within your app. As an fixed solution, please consider remove all vSANNodeQtyAlpha variable setting formulas from your app, then re-set the vSANNodeQtyAlpha variable as below:

Set(vSANNodeQtyAlpha, vSANStartServerQtyEntry.Text)

Note: The vSANStartServerQtyEntry represents the Text Input box itself rather than a Text value. If you execute the Set(vSANNodeQtyAlpha,vSANStartServerQtyEntry) formula, the vSANNodeQtyAlpha variable would be a object value rather than a Text value as below:

6.JPG

 

8.JPG

and the vSANNodeQtyAlpha object value may not include the entered text value.

 

 

Please consider remove all vSANNodeQtyAlpha variable setting formulas within your app, then re-set your vSANNodeQtyAlpha variable using above formula, then re-publish your app, check if the issue is solved. You could consider go to see the vSANNodeQtyAlpha variable value details, then you could find where do you set the vSANNodeQtyAlpha variable:

7.JPG

 

 

Best regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

Community Support Team
Community Support Team

Re: Content not displaying in published version of App

Hi @Titortian ,

According to the issue that you mentioned, it seems to tell that there is something wrong with the value you provided for the 'Sendanemail(V2)_Body' argument of your PowerAppsServerBoMEmail.Run(...) formula.

 

On your side, please check if the vSANNodeEmailBodyServer variable is a valid Text string value within your app. Please consider remove the flow connection from your app, then save and re-load your app, then re-create a new connection to your flow, then try your formula again, check if the issue is solved.

 

In addition, I think it is not necessary to set a variable to store the vSANQuotesServerEmailBodyText, instead, you could consider directly reference it within your PowerAppsServerBoMEmail.Run(...) formula. Please modify your formula as below:

PowerAppsServerBoMEmail.Run(Concat(MyPeople, Mail & ";"), vSANQuotesServerEmailBodyText.Text); // Modify formula here           
Reset(vSANQuotesServerEmailBodyText);        
Clear(MyPeople);
Set(vSANQuotesServerEmailSent, 1)

If the issue still exists, please consider re-create a new flow on your side, then create a connection to the new flow from your app, then try your above formula again, check if the issue is fixed.

 

If the issue has been solved, please consider go ahead to click "Accept as Solved" to identify this thread has been solved. If you have any other questions about PowerApps, please consider open a new thread within this community.

 

Best regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

6 REPLIES 6
digiservice
Level: Powered On

Re: Content not displaying in published version of App

Have you tried using .Text so:

Set( vSANStartServerQtyEntry, vSANStartServerQtyEntry.Text);

 

P.S forums don't like you using too many of the code markup tags this is what is getting your post marked as spam

Titortian
Level: Powered On

Re: Content not displaying in published version of App

I am not sure where I would set that variable.
I tried within the submit button where I am setting my variables for future use but it throws errors indicating:
Unexpected Characters. The formula contains 'Ident' where 'Control' is expected.

I also tried in my output to put vSANNodeQtyAlpha.Text instead of just vSANNodeQtyAlpha and while it does not break anything in the developer environment, it also does not fix anything in production.

 

Any additional thoughts?

Community Support Team
Community Support Team

Re: Content not displaying in published version of App

Hi @Titortian ,

Do you mean that the global variable (vSANNodeQtyAlpha) does not work in your published app in one screen but work in another screen?

 

Based on the issue that you mentioned, I think this issue may be related to vSANNodeQtyAlpha initialization within your app. As an fixed solution, please consider remove all vSANNodeQtyAlpha variable setting formulas from your app, then re-set the vSANNodeQtyAlpha variable as below:

Set(vSANNodeQtyAlpha, vSANStartServerQtyEntry.Text)

Note: The vSANStartServerQtyEntry represents the Text Input box itself rather than a Text value. If you execute the Set(vSANNodeQtyAlpha,vSANStartServerQtyEntry) formula, the vSANNodeQtyAlpha variable would be a object value rather than a Text value as below:

6.JPG

 

8.JPG

and the vSANNodeQtyAlpha object value may not include the entered text value.

 

 

Please consider remove all vSANNodeQtyAlpha variable setting formulas within your app, then re-set your vSANNodeQtyAlpha variable using above formula, then re-publish your app, check if the issue is solved. You could consider go to see the vSANNodeQtyAlpha variable value details, then you could find where do you set the vSANNodeQtyAlpha variable:

7.JPG

 

 

Best regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

Titortian
Level: Powered On

Re: Content not displaying in published version of App

Kris,

I will try to change this.
Yes, you are correct in stating that the (vSANNodeQtyAlpha) global variable does not work on one screen but does work on another.

The other item of note  I am using [ Set(vSANOpticsQtyAlpha, vSANNodeQtyAlpha * "4"); ] on the next line in the same submit button.
Where I am having issues with (vSANNodeQtyAlpha) displaying I had copied the page and changed all references to Node and just replaced them with Optics so for instance in the variable set above you can see that one is vSANNode... and the other is vSANOptics...

On the sheet that has the substitution with Optics for Node, the value is showing up with no issues in the published version.

Thank you,

 

Titortian
Level: Powered On

Re: Content not displaying in published version of App

@v-xida-msft 

This solved my issue with the number not showing up on the published version, and I will mark it as accepted.

Now I have a different issue.
I believe you also assisted with the attachment and flows to an email embedded in a form for me on this same app, but now, after changing to XYZ.text, when I attempt to send the email, it no longer sends and instead has an error.

MailError.png

 

Set(vSANNodeEmailBodyServer,vSANQuotesServerEmailBodyText.Text);
Set(_emailRecipientString, Concat(MyPeople, Mail & ";"));           
PowerAppsServerBoMEmail.Run(_emailRecipientString,vSANNodeEmailBodyServer);           
Reset(vSANQuotesServerEmailBodyText);        
Clear(MyPeople);
Set(vSANQuotesServerEmailSent, 1)

 

I tested the flow itself, and it still works just the tie in from PowerApps is having an issue.

Community Support Team
Community Support Team

Re: Content not displaying in published version of App

Hi @Titortian ,

According to the issue that you mentioned, it seems to tell that there is something wrong with the value you provided for the 'Sendanemail(V2)_Body' argument of your PowerAppsServerBoMEmail.Run(...) formula.

 

On your side, please check if the vSANNodeEmailBodyServer variable is a valid Text string value within your app. Please consider remove the flow connection from your app, then save and re-load your app, then re-create a new connection to your flow, then try your formula again, check if the issue is solved.

 

In addition, I think it is not necessary to set a variable to store the vSANQuotesServerEmailBodyText, instead, you could consider directly reference it within your PowerAppsServerBoMEmail.Run(...) formula. Please modify your formula as below:

PowerAppsServerBoMEmail.Run(Concat(MyPeople, Mail & ";"), vSANQuotesServerEmailBodyText.Text); // Modify formula here           
Reset(vSANQuotesServerEmailBodyText);        
Clear(MyPeople);
Set(vSANQuotesServerEmailSent, 1)

If the issue still exists, please consider re-create a new flow on your side, then create a connection to the new flow from your app, then try your above formula again, check if the issue is fixed.

 

If the issue has been solved, please consider go ahead to click "Accept as Solved" to identify this thread has been solved. If you have any other questions about PowerApps, please consider open a new thread within this community.

 

Best regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

Helpful resources

Announcements
thirdimage

Power Automate Community User Group Member Badge

Fill out a quick form to claim your user group badge now!

sixthImage

Power Platform World Tour

Find out where you can attend!

Power Platform 2019 release wave 2 plan

Power Platform 2019 release wave 2 plan

Features releasing from October 2019 through March 2020

fifthimage

Microsoft Learn

Learn how to build the business apps that you need.

Top Kudoed Authors (Last 30 Days)
Users online (5,867)