cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Adding Flow to Canvas App > Failed during HTTP Request

Hi,

 

i know this has been a topic in some other post but those couldn't help me.

As mentioned in these posts...

https://powerusers.microsoft.com/t5/Building-Power-Apps-Formerly/Failed-during-http-send-request-whe...

https://powerusers.microsoft.com/t5/Building-Power-Apps-Formerly/PowerApps-Flow-Button-returns-quot-...

https://powerusers.microsoft.com/t5/Building-Power-Apps-Formerly/Problem-adding-Flow-to-PowerApps-Fa...

...while getting no errors executing the flow for itself i get an error when adding the flow to my Canvas App.

Using different browsers or creating the flow out of my App as mentioned in the posts above didn't help.

 

I use an array to fill a table within a word template as shown below.

It seems like the array is the problem since some users wrote about problems with "apply to each"-blocks. Additionally the problem only occurs, when i add the "ask in PowerApps"-statement to the "table"-part of my template.

Using a hardcoded array, i can add the Flow to my App and use it providing the single-column-texts through PowerApps. The table within the template is then filled with the pre-entered content.

 

 

Hope someone can help me with this.

 

Regards,

Julian

 

 

"Failed during HTTP-Sendrequest" when adding Flow to a Button"Failed during HTTP-Sendrequest" when adding Flow to a ButtonPopulate Wordtemplate in FlowPopulate Wordtemplate in Flow

1 ACCEPTED SOLUTION

Accepted Solutions

Hi @Anonymous ,

Based on the issue that you mentioned, I think there is something wrong with your flow's configuration.

 

Currently, within MS Flow (Power Automate), it could only accept text string parameter passed from a canvas app. Passing an array value from a canvas app into a flow directly is not supported within PowerApps and MS Flow.

 

As an alternative solution, you should convert the table value into a JSON String value within your app firstly, then pass the converted JSON String value as parameter into your flow, then within your flow, you could use the json function (WDL expression) to convert the passed JSON string value into a JSON Table again, then typed the JSON Table (array data) into the "Tabelle" field of the "Populate a Microsoft Word template" action.

 

On your side, you should re-configure your flow as below:

4.JPG

Add a "Compose" action before the "Populate a Microsoft Word template" action in your flow, then type in "Ask in PowerApps" dynamic content within the "Inputs" field. (The "Compose" action is used to receive JSON String value passed from your app)

Then within your  "Populate a Microsoft Word template" action, set the "Tabelle" field to following formula:

json(triggerBody()['Compose_Inputs'])

 

Within your app, you should convert the Table value (you want to pass to flow) into a JSON String value firstly, then use the converted JSON String value as argument within the 'FlowName'.Run(...) formula to pass to your flow:

The table value I want to pass from app to flow looks like below:

5.JPG

The app's configuration as below:

6.JPG

 

More details about the JSON function in PowerApps, please check the following article:

JSON function

 

Please also check and see if the following thread would help in your scenario:

https://powerusers.microsoft.com/t5/Building-Power-Apps-Formerly/Capture-Image-and-Save-as-Attachment/m-p/360072

 

Best regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

8 REPLIES 8
Pstork1
Most Valuable Professional
Most Valuable Professional

try creating an explicit array variable in the Flow and add your Ask in PowerApps to that.  That way its expecting the parameter to be an array and not a table.



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.
Anonymous
Not applicable

Created an array to fill it into my template as you can see below but still the same error 😕

 

Create_Array.png

Pstork1
Most Valuable Professional
Most Valuable Professional

I'm not clear on what your document is expecting.  Is it expecting a data table or an array?  They aren't the same thing.



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.
Anonymous
Not applicable

I added a screenshot from my wordtemplate and the resulting table.

In this case i used following array:

[

 {"Kategorie":"A", "Beschreibung":"B", "Preis":"C"},

 {"Kategorie":"D", "Beschreibung":"E", "Preis":"F"},

]

 

WordtemplateWordtemplateResulting tableResulting table

Pstork1
Most Valuable Professional
Most Valuable Professional

If you created the variable as I suggested then I would look at the results from a failed run to troubleshoot and see what is actually coming across as the array.  I suspect you aren't getting what you think you are in the array.



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.

Hi @Anonymous ,

Based on the issue that you mentioned, I think there is something wrong with your flow's configuration.

 

Currently, within MS Flow (Power Automate), it could only accept text string parameter passed from a canvas app. Passing an array value from a canvas app into a flow directly is not supported within PowerApps and MS Flow.

 

As an alternative solution, you should convert the table value into a JSON String value within your app firstly, then pass the converted JSON String value as parameter into your flow, then within your flow, you could use the json function (WDL expression) to convert the passed JSON string value into a JSON Table again, then typed the JSON Table (array data) into the "Tabelle" field of the "Populate a Microsoft Word template" action.

 

On your side, you should re-configure your flow as below:

4.JPG

Add a "Compose" action before the "Populate a Microsoft Word template" action in your flow, then type in "Ask in PowerApps" dynamic content within the "Inputs" field. (The "Compose" action is used to receive JSON String value passed from your app)

Then within your  "Populate a Microsoft Word template" action, set the "Tabelle" field to following formula:

json(triggerBody()['Compose_Inputs'])

 

Within your app, you should convert the Table value (you want to pass to flow) into a JSON String value firstly, then use the converted JSON String value as argument within the 'FlowName'.Run(...) formula to pass to your flow:

The table value I want to pass from app to flow looks like below:

5.JPG

The app's configuration as below:

6.JPG

 

More details about the JSON function in PowerApps, please check the following article:

JSON function

 

Please also check and see if the following thread would help in your scenario:

https://powerusers.microsoft.com/t5/Building-Power-Apps-Formerly/Capture-Image-and-Save-as-Attachment/m-p/360072

 

Best regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Anonymous
Not applicable

Thanks, that one helped 😄

MrAutomatey
Frequent Visitor

I have found some information about this : "You will get errors if you start adding actions to the flow after you connect it to Power Apps. Therefore, you need to add all the connections/actions before adding the flow to your PowerApps button."

How to pass field values from a Canvas App to Power Automate(flow) – Part 1 – immersivecoder

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Summer of Solutions | Week 3 Results | Win free tickets to the Power Platform Conference

We are excited to announce the Summer of Solutions Challenge!   This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions in the Forums to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersNumber of SolutionsSuper UsersNumber of Solutions @anandm08  23 @WarrenBelz  31 @DBO_DV  10 @Amik  19 AmínAA 6 @mmbr1606  12 @rzuber  4 @happyume  7 @Giraldoj  3@ANB 6 (tie)   @SpongYe  6 (tie)     Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersSolutionsSuper UsersSolutions @anandm08  10@WarrenBelz 25 @DBO_DV  6@mmbr1606 14 @AmínAA 4 @Amik  12 @royg  3 @ANB  10 @AllanDeCastro  2 @SunilPashikanti  5 @Michaelfp  2 @FLMike  5 @eduardo_izzo  2   Meekou 2   @rzuber  2   @Velegandla  2     @PowerPlatform-P  2   @Micaiah  2     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Week 3:Community MembersSolutionsSuper UsersSolutionsPower Apps anandm0861WarrenBelz86DBO_DV25Amik66Michaelfp13mmbr160647Giraldoj13FLMike31AmínAA13SpongYe27  

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Top Solution Authors
Top Kudoed Authors
Users online (4,166)