cancel
Showing results for
Did you mean:

## Bing maps: Calculate distance between 2 waypoints (straight line)

Hi

I was inspired by Reza Dorrani video on geospatial components on youtube: https://youtu.be/cj2cC8EBj-I

So far everything is working perfectly.

The calculation above is the distance following roads, and estimated traveltime with current traffic.

I would like to add a calculation with the distance between the 2 waypoint in a straight line, does anyone know how to do that?

Just like this website, with the same waypoints:

1 ACCEPTED SOLUTION

Accepted Solutions

Here is how my version works. (Note: my syntax is danish, so you might need to replace ; with ,)

Set pi as a global variable:

Set(varPI;0,017453292519943295

Set Waypoint 1 and Waypoint 2 as Global variables:

Im my case, Waypoint 1 is always one of out company adresses, and Waypoint 2 is always a local building site.

Set this formula in a variable or just on a label:
Round(12742 * Asin(Sqrt(0,5 - Cos((varWP1.point.coordinates.latitude - varWP2.point.coordinates.latitude) * varPI)/2 + Cos(varWP2.point.coordinates.latitude * varPI) * Cos(varWP1.point.coordinates.latitude * varPI) * (1 - Cos((varWP1.point.coordinates.longitude - varWP2.point.coordinates.longitude) * varPI)) / 2));2)

The output is the distance between the 2 waypoints.
12 REPLIES 12
Super User

Hi @UI1222

The way I would approach this would be to call a Flow, or to create a custom connector that calls the Bing REST API.

I'm tagging Reza so that he can better advise.

Thank you for the input.

Does the Bing API supports this? or is it under development, like some of the other things @RezaDorrani mentioned in the video.

The latitude and longitude are in the data set. I guess its possible to calculate it using math, in some way, but im not sure how.

Community Support

Hi @UI1222 ,

Do you want to  calculate the distance between 2 waypoints (straight line)?

Regarding the needs that you mentioned, I think the GetRoute action under Bing Map connector could achieve your needs. I have made a test on my side, please try the following workaround:

Set the Text property of the Label to following:

``BingMaps.GetRoute(TextInput1.Text, TextInput2.Text, {optimize:"distance",distanceUnit:"Kilometer"}).travelDistance``

Note: More details about GetRoute action under the Bing Map connector, please check the following article:

https://docs.microsoft.com/en-us/connectors/bingmaps/#get-route

Of course, if could also consider calculate the Distance between two different Way Points using Math function. Please check and see if the following thread solution could help in your scenario:

https://powerusers.microsoft.com/t5/Building-Power-Apps/Sort-gallery-by-closest-location-after-searc...

Please try above solution, then check if the issue is solved.

Regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Thank you for the input.

Yes, I want to calculate the distance between 2 waypoints in a straight line.

A long story short. We have to pay our employees according to some rules made 100 years ago. Before route calculations where available. Back then, you drew circles on a map around your Company, the further the employee had to travel away from the company to a building site, the more you had to pay.

I'm already using the GetRoute formula in my calculation in the first picture. It works great. But its not what I need in this situation.

Note: The distance actually vary a lot between the two calculations. 33 vs 18 km.

Community Support

Hi @UI1222 ,

Have you tried the Math Calculation solution I provided above?

If could also consider calculate the Distance between two different Way Points using Math function. Please check and see if the following thread solution could help in your scenario:

https://powerusers.microsoft.com/t5/Building-Power-Apps/Sort-gallery-by-closest-location-after-searc...

Please also consider try the above Math Calculation Solution, then check if it could help in your scenario.

Regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

I've tried the formula, but I cant get it to work.

Here is how my version works. (Note: my syntax is danish, so you might need to replace ; with ,)

Set pi as a global variable:

Set(varPI;0,017453292519943295

Set Waypoint 1 and Waypoint 2 as Global variables:

Im my case, Waypoint 1 is always one of out company adresses, and Waypoint 2 is always a local building site.

Set this formula in a variable or just on a label:
Round(12742 * Asin(Sqrt(0,5 - Cos((varWP1.point.coordinates.latitude - varWP2.point.coordinates.latitude) * varPI)/2 + Cos(varWP2.point.coordinates.latitude * varPI) * Cos(varWP1.point.coordinates.latitude * varPI) * (1 - Cos((varWP1.point.coordinates.longitude - varWP2.point.coordinates.longitude) * varPI)) / 2));2)

The output is the distance between the 2 waypoints.

Hi, I've been trying to duplicate this; I have kind of really similar issue with my work, but here the issue is no the routes but the lack of a directions system in the country AND I need to check if my coworkers are at our customer's locations as needed.

Currentlý I have this:

Waypoints:

Set(varWP1,BingMaps.GetLocationByPoint(Value(lb_Loc_Lat.Text),Value(lb_Loc_Lon.Text)));
Set(varWP2,BingMaps.GetLocationByPoint(Value(lb_Sup_Lat.Text),Value(lb_Sup_Lon.Text)))
Note: lb_Sup_Lat/Lon and lob_Loc_Lat/Lon has the coordinates as Decimal Degrees (DD); May this be the issue? But the location of my coworker is Location.Latitude/Longitude so I believe it shouldn't be...

Label of Distances:
Round(12742 * Asin(Sqrt(0.5 - Cos((varWP1.point.coordinates.latitude - varWP2.point.coordinates.latitude) * varPI)/2 + Cos(varWP2.point.coordinates.latitude * varPI) * Cos(varWP1.point.coordinates.latitude * varPI) * (1 - Cos((varWP1.point.coordinates.longitude - varWP2.point.coordinates.longitude) * varPI)) / 2)) , 2)

Note: Just replaced the parts highlighted as Bold) and result still "0"

Frequent Visitor

Hi UI1222, thanks for sharing this. Unfortunately I'm getting an error - I think it's because 2 parameters are being used for the Sqrt function? Looks like a 0 is being provided followed by a formula? I took the 0 out but I'm still not getting the correct result 😞

Announcements

#### Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

#### Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp