Showing results for 
Search instead for 
Did you mean: 
Resolver I
Resolver I

Check mark functionality is ....well wonky

So here is what I got...


2018-12-20 14_14_00-Microsoft Edge.jpg


what i mean by wonky is that the boxes sometimes check or uncheck on select and often require multiple taps or clicks.  

It works a lot beter where OnSelect I have UpdateContext({ShowCard: "Do"}) but then it throws me into a bit of a loop because it remains selected even when I uncheck thus rechecking the box, so that doesn't work.


It would be nice if there was a place for unselect but I am not sure if that makes sense.  One other option would be using the above where OnSelect it shows the card but I would need a command for uncheck to unselect, not sure how to do that.


Anybody have a better way?...thanks for the help.



Accepted Solutions

So I got some help to help me figure out what you actually said and was able to get the solution which is. OnCheck: False OnUcheck: False OnSelect: False Default: I set it to SetCheckbox to allow me to control when I want the box to be checked by default or not then in the card(s) OnVisible: I set the for Do card End_Checkbox.value for See See_Checkbox.value and so on.

View solution in original post

Continued Contributor
Continued Contributor

 Here is what I'm following from your Action setup:

  • When I check the checkbox:
    • OnSelect triggers
      • ShowCard is NOT equal to "Do", so I get a return value of false; however, since this false value is NOT in the context of an evaluation or variable assignment, it essentially does nothing
    • OnCheck triggers:
      • ShowCard is assigned to "Do"
      • Dynamically at the same time, the CheckMark.Reset property is evaluated as true
        • A true CheckMark.Reset value executes a reset
          • The checkbox reassigns itself to its default value.
            • Showcard continues to be equal to "Do", so the default value is conditionally (at that moment in time) equal to true
            • So the checkbox assigns itself--per its (conditional) default value--to true

In laymen terms, when you check your box, ShowCard = "Do". When ShowCard = "Do", your checkbox resets itself to true. So that would explain why your checkbox is wonky.


I think what you are trying to accomplish is made complicated by your attempts to assign a variable to reflect the inherent value of the checkbox. You're essentially trying to make the "ShowCard" variable equal (or correlated) to the trueness or falseness of CheckBox.Value. You don't have to do that. CheckBox.Value = true when checked and false when not checked.

For example, if I want to make TextBox1.Value = "Hello" when CheckBox1.Value is true and "Goodbye" when CheckBox1.Value = false, this is sort of my interpretation of what you are doing:

CheckBox1.OnCheck =
  UpdateContext({UserStatus: "Here"})

CheckBox1.OnUnCheck =
  UpdateContext({UserStatus: "Not Here"})

TextBox1.Value = 
  If(UserStatus = "Here", "Hello",
    If(UserStatus = "Not Here", GoodBye")

This could be made simple by saying (no variable involved; CheckBox.value is the only value that needs to be evaluated):

CheckBox.OnCheck = [no syntax]
CheckBox.OnUnCheck = [no syntax]

TextBox1.Value =
  If(CheckBox.Value = True, "Hello", "Goodbye")


Maybe I'm just dense and not seeing it but what would be a better way of going about it?
Continued Contributor
Continued Contributor

I updated my previous response.

Continued Contributor
Continued Contributor

If you can provide a practical example, then I can try to give you some practical ideas how to approach this checkbox.

So I read again and again what you wrote and am having a little hard time following it because I don't understand how to disconnect the show card from the action of the can we use the example I have provided?


Again what you see in the image is how things are currently setup.  The goal is that there are 3 cards showing, when I press one of the checkboxes that card associated with the box only shows when I uncheck all 3 cards show again.  If I don't first uncheck and just click on a different checkbox, the first checkbox gets unchecked the checkbox I just pressed is active and checked and the card associated with that checkbox only shows.



Continued Contributor
Continued Contributor

@polska2180 wrote:

Again what you see in the image is how things are currently setup.  The goal is that there are 3 cards showing, when I press one of the checkboxes that card associated with the box only shows when I uncheck all 3 cards show again.  If I don't first uncheck and just click on a different checkbox, the first checkbox gets unchecked the checkbox I just pressed is active and checked and the card associated with that checkbox only shows. 

With that information, I now more clearly see what you are doing. And I presume a gallery is involved. And you are correct (and I am wrong) that you will need to use a variable. This is because when a parent object (the gallery) tries to evaluate itself (e.g. filter its displayed records) based on its child (card's checkbox), it creates a circular reference. The child's existence is dependent on the parent. And now the checkbox makes the parent's existence dependent on the child. It's like when some married couples try to decide where to eat out. Wife wants to go where husband wants to go. Husband will go where wife wants to go. And so they end up not going out at all.

That said, you would go about it slightly differently. Consider gallery1:


I would set the checkbox (henceforth referred to as CheckBox1) with the following syntax. Bear in mind that we refer to these records as "Do", "See", "Think" for example-sake, but for real records, you would probably be referring to a unique ID.

CheckBox1.OnCheck =
  UpdateContext({ShowCard: thisItem.ColumnValue})

UpdateContext({ShowCard: Blank()})

So now, when you check the checkbox for {Do} (I'm using curly-braces to show it's a record), it correctly sets ShowCard to value "Do". And when you uncheck the checkbox for {Do}, it correctly blanks out the value of ShowCard. The problem is that if I check {Do} and then check {See} (and even if I check {Think}), it will correctly set ShowCard to the lastest checked item, but it will not uncheck the previous ones. Here's how we fix that:

CheckBox1.Default =
  ThisItem.ColumnValue = ShowCard

Don't ask me why, but for some reason when CheckBox1.Default = true or CheckBox1.Default = false, it acts like an out-of-the-box checkbox; but when you set it up with a unique evaluation like above, it will start automating itself. So now, when you check {Do}, it will do the following: it will assign ShowCard to "Do" and the checkboxes for {See} and {Think} now will be set to their default; and since each card (who selfishly refer to themselves as ThisItem) no longer have their ColumnValue equal to ShowCard (which now equals "Do"), they become false (which means unchecked). Note that if you click really fast, the checkboxes for {Do}, {See}, and {Think} may still appear a bit wonky--as you've mentioned; however, this will be less of an issue after the next step.

gallery1.Items =
ColumnValue = ShowCard

Now you are filtering the parent gallery (gallery1) based on ShowCard. It's important to put the If-Statement because if you omit it, you may find yourself with a blank gallery that has no checkboxes to check.

I opted to be a bit longwinded because I thought it would be to your benefit to see how the events and variables behaved in relationship with each other. Let me know if this answers your question.


In the screenshots, my bottom textbox is used for debugging purposes and is set to:


TextBox2.Text =
  "Currently Selected Record: " & ShowCard

Check {Do}



Uncheck {Do}


Check {See}


Uncheck {See} (same as two screenshots above)... and then Check {Think}



Thanks I will try that when I get home. I'm actually working with cards so pressing the checkbox shows just that one "do" card unchecking shows 4 cards actually or checking a different box shows the card corresponding to that card

So I'm trying to follow along but probably due to my newness in powerapps about a month I'm struggling too. I have 3 cards do think and see they are called that and really I'm looking into suggesions in what I should put into each box for onselect or on unsellect default etc. Conceptual references don't seem to click because I just don't know it that well.

So I got some help to help me figure out what you actually said and was able to get the solution which is. OnCheck: False OnUcheck: False OnSelect: False Default: I set it to SetCheckbox to allow me to control when I want the box to be checked by default or not then in the card(s) OnVisible: I set the for Do card End_Checkbox.value for See See_Checkbox.value and so on.

Helpful resources


Celebrating the June Super User of the Month: Markus Franz

Markus Franz is a phenomenal contributor to the Power Apps Community. Super Users like Markus inspire others through their example, encouragement, and active participation.    The Why: "I do this to help others achieve what they are trying to do. As a total beginner back then without IT background I know how overwhelming things can be, so I decided to jump in and help others. I also do this to keep progressing and learning myself." Thank you, Markus Franz, for your outstanding work! Keep inspiring others and making a difference in the community! 🎉  Keep up the fantastic work! 👏👏   Markus Franz | LinkedIn  Power Apps: mmbr1606  

Copilot Cookbook Challenge | Week 1 Results | Win Tickets to the Power Platform Conference

We are excited to announce the "The Copilot Cookbook Community Challenge is a great way to showcase your creativity and connect with others. Plus, you could win tickets to the Power Platform Community Conference in Las Vegas in September 2024 as an amazing bonus.   Two ways to enter: 1. Copilot Studio Cookbook Gallery: 2. Power Apps Copilot Cookbook Gallery:   There will be 5 chances to qualify for the final drawing: Early Bird Entries: March 1 - June 2Week 1: June 3 - June 9Week 2: June 10 - June 16Week 3: June 17 - June 23Week 4: June 24 - June 30     At the end of each week, we will draw 5 random names from every user who has posted a qualifying Copilot Studio template, sample or demo in the Copilot Studio Cookbook or a qualifying Power Apps Copilot sample or demo in the Power Apps Copilot Cookbook. Users who are not drawn in a given week will be added to the pool for the next week. Users can qualify more than once, but no more than once per week. Four winners will be drawn at random from the total qualifying entrants. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once. If they are drawn multiple times, another user will be drawn at random. Prizes:  One Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value, does not include travel, lodging, or any other expenses) Winners are also eligible to do a 10-minute presentation of their demo or solution in a community solutions showcase at the event. To qualify for the drawing, templates, samples or demos must be related to Copilot Studio or a Copilot feature of Power Apps, Power Automate, or Power Pages, and must demonstrate or solve a complete unique and useful business or technical problem. Power Automate and Power Pagers posts should be added to the Power Apps Cookbook. Final determination of qualifying entries is at the sole discretion of Microsoft. Weekly updates and the Final random winners will be posted in the News & Announcements section in the communities on July 29th, 2024. Did you submit entries early?  Early Bird Entries March 1 - June 2:  If you posted something in the "early bird" time frame complete this form: if you would like to be entered in the challenge.   Week 1 Results:  Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1.  @Mathieu_Paris 1.   @SpongYe 2.  @Dhanush 2.   @Deenuji 3.  n/a3.   @Nived_Nambiar  4.  n/a4.   @ManishSolanki 5.  n/a5.    n/a

Your Moment to Shine: 2024 PPCC’s Got Power Awards Show

For the third year, we invite you, our talented community members, to participate in the grand 2024 Power Platform Community Conference's Got Power Awards. This event is your opportunity to showcase solutions that make a significant business impact, highlight extensive use of Power Platform products, demonstrate good governance, or tell an inspirational story. Share your success stories, inspire your peers, and show off some hidden talents.  This is your time to shine and bring your creations into the spotlight!  Make your mark, inspire others and leave a lasting impression. Sign up today for a chance to showcase your solution and win the coveted 2024 PPCC’s Got Power Award. This year we have three categories for you to participate in: Technical Solution Demo, Storytelling, and Hidden Talent.      The Technical solution demo category showcases your applications, automated workflows, copilot agentic experiences, web pages, AI capabilities, dashboards, and/or more. We want to see your most impactful Power Platform solutions!  The Storytelling category is where you can share your inspiring story, and the Hidden Talent category is where your talents (such as singing, dancing, jump roping, etc.) can shine! Submission Details:  Fill out the submission form by July 12th with details and a 2–5-minute video showcasing your Solution impact. (Please let us know you're coming to PPCC, too!)After review by a panel of Microsoft judges, the top storytellers will be invited to present a virtual demo presentation to the judges during early August. You’ll be notified soon after if you have been selected as a finalist to share your story live at PPCC’s Got Power!  The live show will feature the solution demos and storytelling talents of the top contestants, winner announcements, and the opportunity to network with your community.  It's not just a showcase for technical talent and storytelling showmanship, show it's a golden opportunity to make connections and celebrate our Community together! Let's make this a memorable event! See you there!   Mark your calendars! Date and Time: Thursday, Sept 19th Location: PPCC24 at the MGM Grand, Las Vegas, NV 

Tuesday Tip | Accepting Solutions

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   To enhance our collaborative environment, it's important to acknowledge when your question has been answered satisfactorily. Here's a quick guide on how to accept a solution to your questions: Find the Helpful Reply: Navigate to the reply that has effectively answered your question.Accept as Solution: Look for the "Accept as Solution" button or link, usually located at the bottom of the reply.Confirm Your Selection: Clicking this button may prompt you for confirmation. Go ahead and confirm that this is indeed the solution.Acknowledgment: Once accepted, the reply will be highlighted, and the original post will be marked as "Solved". This helps other community members find the same solution quickly. By marking a reply as an accepted solution, you not only thank the person who helped you but also make it easier for others with similar questions to find answers. Let's continue to support each other by recognizing helpful contributions. 

Reminder: To register for the Community Ambassador Call on June 13th

Calling all Super Users & User Group Leaders     Reminder: To register for the Community Ambassador Call on June 13th—for an exclusive event for User Group Leaders and Super Users! This month is packed with exciting updates and activities within our community.   What's Happening: Community Updates: We'll share the latest developments and what's new in our vibrant community.Special Guest Speaker: Get ready for an insightful talk and live demo of Microsoft Copilot Studio templates by our special guest.Regular Updates: Stay informed with our routine updates for User Groups and Super Users.Community Insights: We'll provide general information about ongoing and upcoming community initiatives. Don't Miss Out: Register Now: Choose the session that fits your schedule best.Check your private messages or Super User Forum for registration links. We're excited to connect with you and continue building a stronger community together.   See you at the call!  

May 2024 Community Newsletter

It's time for the May Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.        COMMUNITY HIGHLIGHTS Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzcreativeopinionExpiscornovusFubarAmikNived_NambiarPstork1OliverRodriguesmmbr1606ManishSolankiMattJimisonragavanrajantimlSudeepGhatakNZrenatoromaoLucas001iAm_ManCatAlexEncodianfernandosilvaOOlashynJmanriqueriosChriddle  BCBuizerExpiscornovus  a33ikBCBuizer  SebSDavid_MA  dpoggermannPstork1     LATEST NEWS   We saw a whole host of amazing announcements at this year's #MSBuild, so we thought we'd share with you a bite sized breakdown of the big news via blogs from Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab, and ✊🏾Justin Graham :   New ways of development with copilots and Microsoft Power PlatformRevolutionize the way you work with Automation and AIPower Apps is making it easier for developers to build with Microsoft Copilot and each otherCopilot in Microsoft Fabric is now generally available in Power BIUnlock new levels of productivity with Microsoft Dataverse and Microsoft Copilot StudioMicrosoft Copilot Studio: Building copilots with agent capabilitiesMicrosoft Power Pages is bringing the new standard in secure, AI-powered capabilities   If you'd like to relive some of the highlights from Microsoft Build 2024, click the image below to watch a great selection of on-demand Keynotes and sessions!         WorkLab Podcast with Charles Lamanna   Check out the latest episode of the WorkLab podcast with CVP of Business Apps and Platforms at Microsoft, Charles Lamanna, as he explains the ever-expanding evolution of Copilot, and how AI is offering new opportunities for business leaders. Grab yourself a coffee and click the image below to take a listen.       Event Recap: European Collaboration and Cloud Summits 2024   Click the image below to read a great recap by Mark Kashman about the recent European Collaboration Summit and European Cloud Summit held in Germany during May 2024. Great work everybody!       UPCOMING EVENTS European Power Platform Conference - SOLD OUT! Congrats to everyone who managed to grab a ticket for the now SOLD OUT European Power Platform Conference, which takes place in beautiful Brussels, Belgium, on 11-13th June. With a great keynote planned from Ryan Cunningham and Sangya Singh, plus expert sessions from the likes of Aaron Rendell, Amira Beldjilali, Andrew Bibby, Angeliki Patsiavou, Ben den Blanken, Cathrine Bruvold, Charles Sexton, Chloé Moreau, Chris Huntingford, Claire Edgson, Damien Bird, Emma-Claire Shaw, Gilles Pommier, Guro Faller, Henry Jammes, Hugo Bernier, Ilya Fainberg, Karen Maes, Lindsay Shelton, Mats Necker, Negar Shahbaz, Nick Doelman, Paulien Buskens, Sara Lagerquist, Tricia Sinclair, Ulrikke Akerbæk, and many more, it looks like the E in #EPPC24 stands for Epic!   Click the image below for a full run down of the exciting sessions planned, and remember, you'll need to move quickly for tickets to next year's event!       AI Community Conference - New York - Friday 21st June Check out the AI Community Conference, which takes place at the Microsoft Corporate building on Friday 21st June at 11 Times Square in New York City. Here, you'll have the opportunity to explore the latest trends and breakthroughs in AI technology alongside fellow enthusiasts and experts, with speakers on the day including Arik Kalininsky, Sherry Xu, Xinran Ma, Jared Matfess, Mihail Mateev, Andrei Khaidarov, Ruven Gotz, Nick Brattoli, Amit Vasu, and more. So, whether you're a seasoned professional or just beginning your journey into AI, click the image below to find out more about this exciting NYC event.       TechCon365 & Power Platform Conference - D.C. - August 12-16th ** EARLY BIRD TICKETS END MAY 31ST! ** Today's the perfect time to grab those early bird tickets for the D.C. TechCon365 & PWRCON Conference at the Walter E Washington Center on August 12-16th! Featuring the likes of Tamara Bredemus, Sunny Eltepu, Lindsay Shelton, Brian Alderman, Daniel Glenn, Julie Turner, Jim Novak, Laura Rogers, Microsoft MVP, John White, Jason Himmelstein, Luc Labelle, Emily Mancini, MVP, UXMC, Fabian Williams, Emma Wiehe, Amarender Peddamalku, and many more, this is the perfect event for those that want to gain invaluable insights from industry experts. Click the image below to grab your tickets today!         Power Platform Community Conference - Sept. 18-20th 2024 Check out some of the sessions already planned for the Power Platform Community Conference in Las Vegas this September. Holding all the aces we have Kristine Kolodziejski, Lisa Crosbie, Daniel Christian, Dian Taylor, Scott Durow🌈, David Yack, Michael O. and Aiden Kaskela, who will be joining the #MicrosoftCommunity for a series of high-stakes sessions! Click the image below to find out more as we go ALL-IN at #PPCC24!       For more events, click the image below to visit the Community Days website.                                            

Top Solution Authors
Top Kudoed Authors
Users online (4,203)