cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Collection Limit

I have a Sharepoint list with 2100 records in it. I have discovered the 500 record limit when using non-delegable functions but I performed the following and was wondering if this is normal? Connect my list as a datasource and set the Items property of a gallery to this datasource. I displayed the ID column and when scrolling in the preview mode I could see well over 1000 records in the gallery. I put a button on the screen and in the OnSelect I had a Collection created 

 

ClearCollect(KPIs, KPIData); UpdateContext( { Counter: CountRows(KPIs) }).

 

When I set the Items property of the gallery to the new collection I only see 500 records and the Count only shows 500 as well. 

 

Does this mean that there is a 500 record limit on collections?

1 ACCEPTED SOLUTION

Accepted Solutions
Anonymous
Not applicable

@mr-dang I have seen your article and thanks. So am I understanding correctly that No matter the data source there is a 500 limit? This is not clear in the documentation I have seen.

View solution in original post

14 REPLIES 14
mr-dang
Community Champion
Community Champion

Hi,

Collections can hold as many records as you want.

 

In your case, although you scrolled down and revealed 1000 records in the Gallery, PowerApps still refers to the original output of the Items property of the gallery when collecting. Since Gallery.Items was linked to the datasource and was already capped to 500, your collection assumed the same cap.

 

There's a few solutions on these forums about how to overcome the 500 record limitation by using a local collection. Here's mine:

https://powerusers.microsoft.com/t5/PowerApps-Forum/500-item-limit-in-CDM-entity-search-filter-need-...

Microsoft Employee
@8bitclassroom
Anonymous
Not applicable

@mr-dang I have seen your article and thanks. So am I understanding correctly that No matter the data source there is a 500 limit? This is not clear in the documentation I have seen.

 

All datasources can return at most 500 records at this time. Some cannot even analyze records beyond the first 500 unfiltered records.

 

So a datasource in OneDrive/Dropbox can have more than 500 records, but you can't read any records after the first 500 even if you tried--it's like they don't exist. Premium connectors like Common Data Service can read all records and Filter among all records, but it can still only return the first 500 records that match a given condition.

 

The site below can tell you what functions and operators are okay:

https://powerapps.microsoft.com/en-us/tutorials/delegation-list/

Microsoft Employee
@8bitclassroom
Anonymous
Not applicable

Thanks for your info

Anonymous
Not applicable

@mr-dang

 

 

I tried the following and encountered odd behavior...

 

 

ClearCollect(HundredChart, [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100]);
UpdateContext({firstrecord: First(KPIData)});
UpdateContext({lastrecord: First(Sort(KPIData,ID,Descending))});
UpdateContext({maxiter: RoundUp((lastrecord.ID-firstrecord.ID)/500,0)});

ClearCollect(iter,
AddColumns(AddColumns(Filter(HundredChart,Value<=maxiter),"min",(Value-1)*500),"max",Value*500)
);

Clear(datasource_temp);
ForAll(iter,
Collect(datasource_temp,
Filter(KPIData,ID>=firstrecord.ID+min && ID<firstrecord.ID+max)
)
);
UpdateContext({lastrecord: First(Sort(datasource_temp,ID,Descending))})

 

 

I have this in the onselect of a button and I have a label set to the lastrecord variable. When the pull is completed I see 2165 in the label and then is quickly changes to 500 in preview mode. In app mode I only see 500.  I put a gallery on the screen showing the id of the datasource_temp collection and it only goes up to 500 in the preview. 

 

Any idea what is going on here?

@Anonymous,

Is the ID column of KPIData a numerical value or is it text?

Microsoft Employee
@8bitclassroom
Anonymous
Not applicable

@mr-dang Im pretty sure it is. I added it as a source to a Gallery and did ThisItem.ID + ThisItem.ID and the math was successful. The ID is an internal Sharepoint data type but it appears that Powerapps is interpreting it correctly.


@Anonymous wrote:

@mr-dang

 

 

I tried the following and encountered odd behavior...

 

 

ClearCollect(HundredChart, [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100]);
UpdateContext({firstrecord: First(KPIData)});
UpdateContext({lastrecord: First(Sort(KPIData,ID,Descending))});
UpdateContext({maxiter: RoundUp((lastrecord.ID-firstrecord.ID)/500,0)});

ClearCollect(iter,
AddColumns(AddColumns(Filter(HundredChart,Value<=maxiter),"min",(Value-1)*500),"max",Value*500)
);

Clear(datasource_temp);
ForAll(iter,
Collect(datasource_temp,
Filter(KPIData,ID>=firstrecord.ID+min && ID<firstrecord.ID+max)
)
);
UpdateContext({lastrecord: First(Sort(datasource_temp,ID,Descending))})

 

 

I have this in the onselect of a button and I have a label set to the lastrecord variable. When the pull is completed I see 2165 in the label and then is quickly changes to 500 in preview mode. In app mode I only see 500.  I put a gallery on the screen showing the id of the datasource_temp collection and it only goes up to 500 in the preview. 

 

Any idea what is going on here?


 

The part in red is extra. You can delete it. It explains why the number jumps. Can you place CountRows(datasource_temp) in a label and see it count up as the formula imports more records?

Microsoft Employee
@8bitclassroom
Anonymous
Not applicable

@mr-dang Removed the red and put the CountRows(datasource_temp) in the Text of a label...after it finished it showed 500. Do you not get the same result?

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

  It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd. at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3rd, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!       Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪🌠

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

March User Group Update: New Groups and Upcoming Events!

  Welcome to this month’s celebration of our Community User Groups and exciting User Group events. We’re thrilled to introduce some brand-new user groups that have recently joined our vibrant community. Plus, we’ve got a lineup of engaging events you won’t want to miss. Let’s jump right in: New User Groups   Sacramento Power Platform GroupANZ Power Platform COE User GroupPower Platform MongoliaPower Platform User Group OmanPower Platform User Group Delta StateMid Michigan Power Platform Upcoming Events  DUG4MFG - Quarterly Meetup - Microsoft Demand PlanningDate: 19 Mar 2024 | 10:30 AM to 12:30 PM Central America Standard TimeDescription: Dive into the world of manufacturing with a focus on Demand Planning. Learn from industry experts and share your insights. Dynamics User Group HoustonDate: 07 Mar 2024 | 11:00 AM to 01:00 PM Central America Standard TimeDescription: Houston, get ready for an immersive session on Dynamics 365 and the Power Platform. Connect with fellow professionals and expand your knowledge. Reading Dynamics 365 & Power Platform User Group (Q1)Date: 05 Mar 2024 | 06:00 PM to 09:00 PM GMT Standard TimeDescription: Join our virtual meetup for insightful discussions, demos, and community updates. Let’s kick off Q1 with a bang! Leaders, Create Your Events!    Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you!

Top Solution Authors
Top Kudoed Authors
Users online (5,649)