cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
AVTS
Post Prodigy
Post Prodigy

Collection to Dataverse Table

Dear Friends,

 

While copying the collection data to Dataverse table i am getting following error, 

 

Below is formula,  Collection is pmosave2 and table is EsmMOtimes

 

ForAll(pmosave2 As currentRecord1,
With({rowCount1: CountRows(Filter(pmosave2,HTTP_Body=currentRecord1.HTTP_Body))},

If(rowCount1 = 1,
EsmMOtimes(
currentRecord1.HTTP_Body,
currentRecord1.HTTP_Body_1,
currentRecord1.HTTP_Body_2,
currentRecord1.HTTP_Body_3,
currentRecord1.HTTP_Body_4,
currentRecord1.HTTP_Body_5,
currentRecord1.HTTP_Body_6

)
)
)
);

 

Above coding is not responding as expected. Is there anything wrong with this coding . Please share your expertise. 

 

Thanks in Advance, 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
AVTS
Post Prodigy
Post Prodigy

ForAll(pmosave2 As currentRecord,
With({rowCount: CountRows(Filter(pmosave2,HTTP_Body=currentRecord.HTTP_Body))},

If(rowCount = 1,
Patch(EsmMOtimes,
Defaults(EsmMOtimes),
{
HTTP_Body: currentRecord.HTTP_Body,
HTTP_Body_1: currentRecord.HTTP_Body_1,
HTTP_Body_2:currentRecord.HTTP_Body_2,
HTTP_Body_3:currentRecord.HTTP_Body_3,
HTTP_Body_4:currentRecord.HTTP_Body_4,
HTTP_Body_5:currentRecord.HTTP_Body_5,
HTTP_Body_6:currentRecord.HTTP_Body_6
}
)
)
)
);

 

View solution in original post

17 REPLIES 17
AVTS
Post Prodigy
Post Prodigy

ForAll(pmosave2 As currentRecord,
With({rowCount: CountRows(Filter(pmosave2,HTTP_Body=currentRecord.HTTP_Body))},

If(rowCount = 1,
Patch(EsmMOtimes,
Defaults(EsmMOtimes),
{
HTTP_Body: currentRecord.HTTP_Body,
HTTP_Body_1: currentRecord.HTTP_Body_1,
HTTP_Body_2:currentRecord.HTTP_Body_2,
HTTP_Body_3:currentRecord.HTTP_Body_3,
HTTP_Body_4:currentRecord.HTTP_Body_4,
HTTP_Body_5:currentRecord.HTTP_Body_5,
HTTP_Body_6:currentRecord.HTTP_Body_6
}
)
)
)
);

 

@AVTS 

This formula is not going to work!

 

First - What, and why, are you doing a count rows on the same collection and then trying to work on that record if it exists??  Of course it would exist, otherwise it would not be in the table.  Are you doing this because you could have more than one and you only want to perform this action on instances where there is only one record and not a second or more?

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

@AVTS 

Your formula is using the ForAll backward.  It is not a For Loop.  It is a function that returns a table.  Your performance will suffer greatly when using it backward like that.

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

Hi @RandyHayes  Thanks for taking time to respond on my query. Much Appreciated.

 

Requirement 1 . 

 

Copy the data from collection to Dataverse Table 

 

Collection name : pmosave2

Table name : EsmMOtimes

 

Both places column name is same. 

 

Requirement 2 : 

 

I wanted to exclude the records during the copy from collection to table if that is available more than one.

 

So - if the HTTP_Body value appears only once in the source, then it will run the button program for that row - otherwise if it appears more than once, it will not run the button program

 

 

So my coding fulfills both requirement. 

 

Please share your idea of your working which can over come the application performance / Simplify the process. 

 

Thanks in Advance, 

@AVTS 

If the column names are identical to the source, then the following will give you that functionality in a more performant way:

Patch(EsmMOtimes,
    ForAll(        
        Filter(
            AddColumns(
                GroupBy(pmosave2,
                    "HTTP_Body", "_data"
                ),
                "_rows", CountRows(_data)
            ),
            _rows=1
        ) As _item,
        LookUp(pmosave2, HTTP_Body = _item.HTTP_Body)
    )
)

This will (internally) create a table of records where the count of HTTP_Body is only found once.  Then it returns (from the ForAll) a table of records from looking up each record in the collection based on the unique HTTP_Body.

Then that entire table is handed to Patch to actually do the patch to the datasource.

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

Thank you @RandyHayes i am getting following error  . Is this something to do with sequencing . Please assist. 

 

AVTS_0-1658328237888.png

AVTS_1-1658328273553.png

 

Thanks in Advance 

 

@RandyHayes  please check this error when you have time. Looks very interesting , Thanks in Advance

@AVTS 

This means that you have a column name or data type in your collection that does not match the data source.

You will need to look at how you are defining and putting records into your collection.  The column names need to match the real names of the columns and the data types in the columns in your records needs to match the data types for the columns in the datasource.

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

All are identical . Below is the code details. Let me know if my understanding is incorrect. 

 

 

Collection Formula..

 

ForAll(
Gallery2.AllItems,
Collect(
colLocalAnswers111,
{

maintenanceOrder : Label9_2.Text,
storageLocation :ThisRecord.storageLocation,
materialNumber: ThisRecord.materialNumber,
//or whatever the control's name is
quantity: TextInput9.Text

}
)
);

 

----

Table view 

AVTS_1-1658428186562.png

 

 

Datatable Collectionview,

AVTS_0-1658428114891.png

 

 

 

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!   This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions in the Forums to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersNumber of SolutionsSuper UsersNumber of Solutions @anandm08  23 @WarrenBelz  31 @DBO_DV  10 @Amik  19 AmínAA 6 @mmbr1606  12 @rzuber  4 @happyume  7 @Giraldoj  3@ANB 6 (tie)   @SpongYe  6 (tie)     Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersSolutionsSuper UsersSolutions @anandm08  10@WarrenBelz 25 @DBO_DV  6@mmbr1606 14 @AmínAA 4 @Amik  12 @royg  3 @ANB  10 @AllanDeCastro  2 @SunilPashikanti  5 @Michaelfp  2 @FLMike  5 @eduardo_izzo  2   Meekou 2   @rzuber  2   @Velegandla  2     @PowerPlatform-P  2   @Micaiah  2     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Week 3:Community MembersSolutionsSuper UsersSolutionsPower Apps anandm0861WarrenBelz86DBO_DV25Amik66Michaelfp13mmbr160647Giraldoj13FLMike31AmínAA13SpongYe27     Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Week 4:Community MembersSolutionsSuper UsersSolutionsPower Apps DBO-DV21WarranBelz26Giraldoj7mmbr160618Muzammmil_0695067Amik14samfawzi_acml6FLMike12tzuber6ANB8   SunilPashikanti8

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Top Solution Authors
Top Kudoed Authors
Users online (4,523)