cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
simms7400
Post Prodigy
Post Prodigy

ComboBox Issue - will not source a default

Hi Folks -

I'm trying to add a ComboBox to an EditForm of mine, particularly within a DataCard.

The EditForm sits on a SP List called "rdActivity".

 

Ultimately, if an end user insitaites a change request, the ComboBox needs to populate with the current data element from the "Parent_Node" SP List column from "rdActivity".

 

In the screen shot below, I have the ComboBox off to the side right now just to validate, but furture state will be the ComboBox will overlay the "Parent Node" node and then the"Parent Node" DataCardValue field will be "ComboBox2.Selected.Value"...

 

helo.jpg

 

The form right now is reading in all columns related to PFP-A1217500 thereofore the ComboBox should be populated with PFI-00590-10159 as showns in the "Parent Node" field above.

 

My ComboBox is a collection.

 

Weird that the DefaultSelectedItems validates but doesn't return anything. Any ideas? Thank you!

 

 

29 REPLIES 29

@RandyHayes 

 

Bingo!! Your assumption is correct!  Sorry for all of my confusion!!

 

And yes, we may as well post up at Sam Adams and just hook directly into the vat of Lager LOL

 

 

@simms7400 

Sounds good to me...a constant beer flow 😉

 

Okay...we're on the same page now - a carton of milk and a dozen eggs.

 

So, back to the collection - this will work for you:

 

Clear(ListActParentList); 
Collect(ListActParentList, 
           ShowColumns(
               Filter(RD_Investment_List, Portfolio_Status<>"Terminated"), 
               "Name", "Parent_Node")
         );
Collect(ListActParentList, 
           ShowColumns(
               Filter(RD_Target_List,Portfolio_Status<>"Terminated"), 
               "Name", "Parent_Node")
        )

 

 

Then, the ListActParentList will be the Items property for the ComboBox.  You will set this ComboBox to display the Name value (I believe this is the one you want...if not, then the Parent_Node)

The DefaultSelectedItems will be:

    Filter(ListActParentList, Parent_Node=ThisItem.Parent_Node)

 

Now, some of what happens next will drop back to your data...if you have a Parent_Node value in both list (from your collection) that have the same value, you will have two items selected.

If that is the case and is an issue, then let me know.

 

And, as for the New Record scenario...I believe you just want this combobox to be not visible since it plays no role.

In your Update, you will want to have the logic to determine if it is a new record, and if so, then use the PFPParent variable, and if it's an edit, then use the combobox.Selected.Parent_Node value.

 

Nail head hit, or are we still swinging at pitches?

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

@RandyHayes 

 

So RD_Target_List doesn't have a column called "Parent_Node", so the collection is failing.  RD_Investment_List does, but again, the Parent_Node column I'm reffering to is in rdActivity, not the data sources.

 

Does that make sense?

@simms7400 

Yes, makes sense...I'm reviewing that from your photos now.

 

So, this begs the question...what value do RD_Target_List and RD_Investment_List play in this?  If they don't have a corresponding Parent_Node (which is what you are trying to get), then they will only have part of what you want...a name.

 

Are you saying that you want to get (let's stick with one list at the moment) all of the Name values from RD_Target_List, then find all of the Parent_Node values from the rdActivity list where the Name values are equal?

If that's the case, then you could change your formula for the collection to this:

Clear(ListActParentList); 
Collect(ListActParentList, 
           AddColumns(
               ShowColumns(
                   Filter(RD_Investment_List, Portfolio_Status<>"Terminated"), 
                   "Name"),
               "Parent_Node", Lookup(rdActivity, Name=RD_Investment_List[@Name]).Parent_Node
            )
         );
Collect(ListActParentList, 
           AddColumns(
              ShowColumns(
                  Filter(RD_Target, List,Portfolio_Status<>"Terminated"), 
                  "Name"), 
         "Parent_Node", Lookup(rdActivity, Name=RD_Target_List),Parent_Node
           )
        )

Now...some adjustment might be needed on that formula.  I'm just shooting from my head (at least not at it 😉 )

 

But, I'm not sure if that is in fact what you are looking for.  And, I don't know how that might play into any duplication or similar records.

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

@RandyHayes 

 

The "Name" columns from both the RD_Indication_List and RD_Investment_List are all POTENTIAL values that someone can chose from when selecting a new "Parent_Node" in this EditForm.  There selection will then POPULATE the "Parent_Node" column of "rdActivity".

 

Here is a screen shot:

hello YES.jpg

This of it this way. The values in the "Name" Column of "RD_Investment_List" & "RD_Target_List" are Parents to the data elements in the "Name" column in "rdActivity".

 

Does that make sense?

Then I believe this is getting even easier by the moment. We really don't need to alter the collection to add the parent node. We just need to gather the names, then lookup the parent on submit.
If this sounds right, let me know. I'm out for a little bit but can provide some guidance on it a little later.
_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

progress.jpg

 

@RandyHayes  Randy, sounds good!

 

I also am making some progress and am getting the combobox to populate, but as you can see, its the wrong data element. I'm not sure why its populating with the wron node, but i'll keep digging.

 

@simms7400 

So, I'm a little confused on why you're dealing with the PFPParent variable in this case.  

I thought in our "understanding" moment, that PFPParent ONLY applied in the case of the user selecting a Parent_Node from the Gallery, and only when they were creating a new request???

 

From what I lastly understood, the process was this:

1) Collect all the Name values from the two lists:

Clear(ListActParentList); 
Collect(ListActParentList, 
         ShowColumns(
             Filter(RD_Investment_List, Portfolio_Status<>"Terminated"), 
             "Name"),
         );
Collect(ListActParentList, 
        ShowColumns(
            Filter(RD_Target, List,Portfolio_Status<>"Terminated"), 
            "Name"), 
        )

This would be the Items property of the ComboBox:  ListActParentList

2)  Now..this is where it gets fuzzy...

For existing requests - Before you wanted to display the names in the collection and have the current record Name as the current selection.  And from that they could select a different name value.

In your photo, I am seeing the Parent_Node values listed - is that what you want or the Name?

For New requests - the combobox plays no role as the PFPParent variable is what is driving that - and it has the Parent_Node value in it to be used.

 

Help guide me to your dream my friend.  I keep blowing a tire!!

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

@RandyHayes 

 

It works as expected now, I made a few tweaks!

 

So, the values from "Name" columns of "RD_Indication_List" & "RD_Investment_List" correpsond to the POTENTIAL values that CAN be leveraged in the "Parent_Node" column of "rdActivity" (where this EditForm sits on.  The value from "Name" column in "rdActivity" is the uniqe ID and used to populate this EidtForm.

 

The Items property of my ComboBox is "ListActParentList". Remeber, the ComboBox sits in my "Parent Node" field.

My "Parent Node" field has a default of my variable "PFPParent".

 

My ComboBox defaultselectitems is as follows:

Filter(ListActParentList, Name=PFPParent)

Note above, the NAME from the collection corresponds to the "PFPParent" value, not "Parent_Node".

 

Then, in my "Parent Node" DataCardValue field I'm using the following:

ComboBox.Selected.Name

And viola! Everything is working as expected now!!!  Thank you again Randy. It was a challenge and I'm sorry for not being more clear!

 

@simms7400 

WOW...I'm glad we finally got the pieces together!!

 

One observation I noted in this and some other of your posts - you seem conscious of the datacard that your ComboBox is in.  This really is not relevant to this scenario.  When you put your own control in place like this and tie the items and other properties together like we have, the fact that it is in a datacard is not important.  The ONLY aspect that would be somewhat relevant is that the control can make use of the ThisItem value, and that is really only because the control is in a Form.

So, I mention that only to perhaps help you take that part out of your mind when dealing with this stuff.  The datacard and the control (in this case) are in no way related and therefore any concerns over what it can access or use should not complicate your process.  All of the formulas we discussed are pretty much outside of the concern for the datacard.

 

ANYWAY...YAY!!  You are up and running.  Sounds like a beer moment!

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

Helpful resources

Announcements

Celebrating the May Super User of the Month: Laurens Martens

  @LaurensM  is an exceptional contributor to the Power Platform Community. Super Users like Laurens inspire others through their example, encouragement, and active participation. We are excited to celebrated Laurens as our Super User of the Month for May 2024.   Consistent Engagement:  He consistently engages with the community by answering forum questions, sharing insights, and providing solutions. Laurens dedication helps other users find answers and overcome challenges.   Community Expertise: As a Super User, Laurens plays a crucial role in maintaining a knowledge sharing environment. Always ensuring a positive experience for everyone.   Leadership: He shares valuable insights on community growth, engagement, and future trends. Their contributions help shape the Power Platform Community.   Congratulations, Laurens Martens, for your outstanding work! Keep inspiring others and making a difference in the community!   Keep up the fantastic work!        

Check out the Copilot Studio Cookbook today!

We are excited to announce our new Copilot Cookbook Gallery in the Copilot Studio Community. We can't wait for you to share your expertise and your experience!    Join us for an amazing opportunity where you'll be one of the first to contribute to the Copilot Cookbook—your ultimate guide to mastering Microsoft Copilot. Whether you're seeking inspiration or grappling with a challenge while crafting apps, you probably already know that Copilot Cookbook is your reliable assistant, offering a wealth of tips and tricks at your fingertips--and we want you to add your expertise. What can you "cook" up?   Click this link to get started: https://aka.ms/CS_Copilot_Cookbook_Gallery   Don't miss out on this exclusive opportunity to be one of the first in the Community to share your app creation journey with Copilot. We'll be announcing a Cookbook Challenge very soon and want to make sure you one of the first "cooks" in the kitchen.   Don't miss your moment--start submitting in the Copilot Cookbook Gallery today!     Thank you,  Engagement Team

Announcing Power Apps Copilot Cookbook Gallery

We are excited to share that the all-new Copilot Cookbook Gallery for Power Apps is now available in the Power Apps Community, full of tips and tricks on how to best use Microsoft Copilot as you develop and create in Power Apps. The new Copilot Cookbook is your go-to resource when you need inspiration--or when you're stuck--and aren't sure how to best partner with Copilot while creating apps.   Whether you're looking for the best prompts or just want to know about responsible AI use, visit Copilot Cookbook for regular updates you can rely on--while also serving up some of your greatest tips and tricks for the Community. Check Out the new Copilot Cookbook for Power Apps today: Copilot Cookbook - Power Platform Community.  We can't wait to see what you "cook" up!      

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Top Solution Authors
Top Kudoed Authors
Users online (5,624)