cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
HallieG
Helper II
Helper II

Complete task Chart - Monthly overview

Hi! I don't know how to word this so I will just try and explain what I would like the end result to be. 

 

I have a task members must complete daily, recorded in a SharePoint list with date complete. I want to be able to display this by showing every day and either a count or icon if the member completed it that day or not. So they can visually see missed days, the sharepoint list only have success days. I think I might be able to do a lookup? I am sorry I am just lost on how to explain this. 

chart.png

 

6 REPLIES 6
Anonymous
Not applicable

You can use the calendar template if you like to get a visual calendar then add a count to the little dod in the calendar that shows it there is an event or not.

There are lots of ways to achieve what you want.

You'll need a collection of dates, from and to a date, then you can grab all the sharepoint items that equal those dates.
v-xida-msft
Community Support
Community Support

Hi @HallieG ,

Could you please share a bit more about your scenario?

Do you want to design a Chart based on the Table you provided within a PowerApps app?

 

If you want to design a Chart based on the Table you provided within a PowerApps app to show the Complete task, I think the Column chart control could achieve your needs. I have made a test on my side, please take a try with the following workaround:

The data structure of my Excel table as below:2.JPG

App's configuration as below:

1.JPG

1. Add Column chart control in your app.

2. Set the Items property to following:

TaskCompleted      /* <-- TaskCompleted represents my Excel table, you need to type your own SP List data source or Excel table here */

set the Labels property to Date column, set the Series1 property to Completed column.

 

Please consider take a try with above solution, check if it could help in your scenario.

 

Best regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

So my issue is I don't collect dates on the days they don't complete the task. I don't know how to get the None represented dates to show up. 

 

my data will only have 8/5/2019, 8/6/2019, 8/8/2019, 8/8/2019, and 8/8/2019. 

 

Here are some screenshots to further explain what my thoughts are. I can't figure out how to get my SharePoint list into the Calendar. Any advice or suggestion for anything like these will be greatly appreciated. 

month dots.pngmonth count.png

 

 

Hi HallieG,

Did you resolve your issue or do you still need help? If you require help I can give you some steps to help you overcome your issue.

Thanks
Luke

I would love some more help! I can't figure this out. 

@HallieG 

 

ok since I just resolved a  issue I was having  I am feeling generous so I will explain in detail how this works. Beware it is quite involved. 

 

When you create the calendar page it is linking to your outlook calendar. Essentially it is copying your outlook events into a collection and then using that collection to display the events in a gallery. 

 

Our aim is to populate the collection with data from SharePoint or any other data source. The one constraint we have is that we need to have a date field in our data source. 

 

So the first step is to setup our data source connection ensuring one of our fields (columns) is a date. 

 

Next proceed to create your new screen  using the calendar template. 

image.png

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The page will generate

 

The dropdown shows a list of outlook calendars you have assigned to your user account. If you select the dropdown list and then the OnSelect property

image.png

 

 

 

 

 

you should notice a formula like this:

 

/*retrieves calendar events for all days in current month view and selected calendar 
_minDate and _maxDate act as markers to prevent duplicate data collection*/         
If(IsBlank(_userDomain),         
	UpdateContext({_showLoading: true});         
	Set(_userDomain, Right(User().Email, Len(User().Email) - Find("@", User().Email)));         
	Set(_dateSelected, Today());         
	Set(_firstDayOfMonth, DateAdd(Today(), 1 - Day(Today()), Days));         
	Set(_firstDayInView, DateAdd(_firstDayOfMonth, -(Weekday(_firstDayOfMonth) - 2 + 1), Days));         
	Set(_lastDayOfMonth, DateAdd(DateAdd(_firstDayOfMonth, 1, Months), -1, Days))         
);         
Set(_calendarVisible, false);         
UpdateContext({_showLoading: true});         
Set(_myCalendar, dropdownCalendarSelection1.Selected);         
Set(_minDate, DateAdd(_firstDayOfMonth, -(Weekday(_firstDayOfMonth) - 2 + 1), Days));         
Set(_maxDate, DateAdd(DateAdd(_firstDayOfMonth, -(Weekday(_firstDayOfMonth) - 2 + 1), Days), 40, Days));         
ClearCollect(MyCalendarEvents, Office365.GetEventsCalendarViewV2(_myCalendar.Name, Text(_minDate, UTC), Text(_maxDate, UTC)).value);         
UpdateContext({_showLoading: false});         
Set(_calendarVisible, true)

not the most friendly I know. 

 

So the line which is important here is this one:

 

ClearCollect(MyCalendarEvents, Office365.GetEventsCalendarViewV2(_myCalendar.Name, Text(_minDate, UTC), Text(_maxDate, UTC)).value);         

This is the line which populates a collection called MyCalendarEvents with a list of event from the selected calendar in the dropdown list. It is also filtering the calender events to a range that is displayed on screen i.e. the calendar month plus a few days either side. 

Note:  the page works by populating a collection with one month plus a few days worth of events that are on display. When you navigate through different months we are updating the collection each time. 

 

This is the line of code we need to change. We want to change it so your data is coming from a SharePoint list. your code should be something like this. 

ClearCollect(MyCalendarEvents, 
Filter(SHAREPOINTLISTNAMEHERE, DATECOLUMNNAME HERE >= _minDate && DATECOLUMNNAME <= _maxDate))

This will populate the calendar events collection with events for the month on screen. 

 

you can now remove the following line

Set(_myCalendar, dropdownCalendarSelection1.Selected);  

this line is used when getting calendar events from your outlook calendar. 

 

Next step

 

you want to copy all of the formulas from the onselect and paste it into the onvisible property of the page. This is so we can delete the dropdown list and have the calendar automatically load when you navigate to the page. When you have moved the formulas you can delete the dropdown list. 

 

you should now have the following:

1- no dropdown on screen

2- the corrected formula set for the onvisible property of the page. 

image.png

 

 

 

 

 

 

 

 

 

 

 

if you hold alt on your keyboard and navigate to another page and back you should see the calendar loads. 

 

image.png

You will notice some of the controls are miss aligned, this is because the ms template has the location of these controls based on the location of the dropdown we deleted. So  move them as desired. 

 

image.png

 

Next step

We need to update the navigation controls, the event indicator and the event details below the calendar. 

 

Navigation Controls

Each navigation control has an onselect event. The event basically calculates the next view and collects the events within the range. The left navigation control has an onselect property of: 

 

 

/*changes month view to previous month*/
           
Set(_firstDayOfMonth, DateAdd(_firstDayOfMonth, -1, Months));           
Set(_firstDayInView, DateAdd(_firstDayOfMonth, -(Weekday(_firstDayOfMonth) - 2 + 1), Days));           
Set(_lastDayOfMonth, DateAdd(DateAdd(_firstDayOfMonth, 1, Months), -1, Days));           
/*collects calendar events for all days in current month view. Updates _minDate to prevent duplicate data collection if user returns to this month view*/           
If(_minDate > _firstDayOfMonth,           
 Collect(MyCalendarEvents, Office365.GetEventsCalendarViewV2(_myCalendar.Name, Text(_firstDayInView, UTC), Text(DateAdd(_minDate, -1, Days), UTC)).value);           
 Set(_minDate, _firstDayInView))

Here you need to update the collect formula

 

 

 Collect(MyCalendarEvents, Office365.GetEventsCalendarViewV2(_myCalendar.Name, Text(_firstDayInView, UTC), Text(DateAdd(_minDate, -1, Days), UTC)).value);           

 

you need to set the formula to something like 

 

Collect(MyCalendarEvents, 
Filter(SHAREPOINTLISTNAMEHERE, DATECOLUMNNAME HERE >= _firstDayInView && DATECOLUMNNAME <= DateAdd(_minDate, -1, Days)));

the right navigation has a similar formula. Again replace the collect formula 

 Collect(MyCalendarEvents, Office365.GetEventsCalendarViewV2(_myCalendar.Name, Text(DateAdd(_maxDate, 1, Days), UTC), DateAdd(_firstDayInView, 40, Days)).value); 

to something like

Collect(MyCalendarEvents, 
Filter(SHAREPOINTLISTNAMEHERE, DATECOLUMNNAME HERE >= DateAdd(_maxDate, 1, Days) && DATECOLUMNNAME <= DateAdd(_firstDayInView, 40, Days)));

the event indicator

navigate to gallery called MonthDayGallery1

click on the element Circle1 

select the visible property

image.png

you will see a formula like 

/*Visible if calendar events are found on this day*/               
CountRows(Filter(MyCalendarEvents, DateValue(Text(Start)) = DateAdd(_firstDayInView,ThisItem.Value,Days))) > 0 && !Subcircle1.Visible && Title2.Visible

this essentially checks each day on the calendar to see if there are any events for the day. If there are events it shows the little red dot indicator. This formula is actually quite inefficient as it is counting how many events are on each day. If you have a lot of events this can really slow down your app. So I would suggest something like this: 

 

DateAdd(_firstDayInView,ThisItem.Value,Days) in MyCalendarEvents.DATECOLUMNNAME

it essentially just checks  if the calendar date exists within the collections date column. 

 

FINALLY the event details

I am referring to the gallery below the calendar gallery

image.png

if you select the gallery named CalendarEventsGallery1 and the property Items

you will see the following formula 

SortByColumns(Filter(MyCalendarEvents, Text(Start, DateTimeFormat.ShortDate) = Text(_dateSelected, DateTimeFormat.ShortDate)), "Start")

you need to modify this to use your date column 

 

SortByColumns(Filter(MyCalendarEvents, Text(DATECOLUMNNAME, DateTimeFormat.ShortDate) = Text(_dateSelected, DateTimeFormat.ShortDate)), "DATECOLUMNNAME")

the final final setup is to update the labels within the gallery so they use data from your collection. 

 

when you have done all that it should work.

 

Hopefully you will find this useful! 

Thanks,

Luke

 

Helpful resources

Announcements

Win free tickets to the Power Platform Conference | Summer of Solutions

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**

Celebrating the June Super User of the Month: Markus Franz

Markus Franz is a phenomenal contributor to the Power Apps Community. Super Users like Markus inspire others through their example, encouragement, and active participation.    The Why: "I do this to help others achieve what they are trying to do. As a total beginner back then without IT background I know how overwhelming things can be, so I decided to jump in and help others. I also do this to keep progressing and learning myself." Thank you, Markus Franz, for your outstanding work! Keep inspiring others and making a difference in the community! 🎉  Keep up the fantastic work! 👏👏   Markus Franz | LinkedIn  Power Apps: mmbr1606  

Copilot Cookbook Challenge | Week 1 Results | Win Tickets to the Power Platform Conference

We are excited to announce the "The Copilot Cookbook Community Challenge is a great way to showcase your creativity and connect with others. Plus, you could win tickets to the Power Platform Community Conference in Las Vegas in September 2024 as an amazing bonus.   Two ways to enter: 1. Copilot Studio Cookbook Gallery: https://aka.ms/CS_Copilot_Cookbook_Challenge 2. Power Apps Copilot Cookbook Gallery: https://aka.ms/PA_Copilot_Cookbook_Challenge   There will be 5 chances to qualify for the final drawing: Early Bird Entries: March 1 - June 2Week 1: June 3 - June 9Week 2: June 10 - June 16Week 3: June 17 - June 23Week 4: June 24 - June 30     At the end of each week, we will draw 5 random names from every user who has posted a qualifying Copilot Studio template, sample or demo in the Copilot Studio Cookbook or a qualifying Power Apps Copilot sample or demo in the Power Apps Copilot Cookbook. Users who are not drawn in a given week will be added to the pool for the next week. Users can qualify more than once, but no more than once per week. Four winners will be drawn at random from the total qualifying entrants. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once. If they are drawn multiple times, another user will be drawn at random. Prizes:  One Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value, does not include travel, lodging, or any other expenses) Winners are also eligible to do a 10-minute presentation of their demo or solution in a community solutions showcase at the event. To qualify for the drawing, templates, samples or demos must be related to Copilot Studio or a Copilot feature of Power Apps, Power Automate, or Power Pages, and must demonstrate or solve a complete unique and useful business or technical problem. Power Automate and Power Pagers posts should be added to the Power Apps Cookbook. Final determination of qualifying entries is at the sole discretion of Microsoft. Weekly updates and the Final random winners will be posted in the News & Announcements section in the communities on July 29th, 2024. Did you submit entries early?  Early Bird Entries March 1 - June 2:  If you posted something in the "early bird" time frame complete this form: https://aka.ms/Copilot_Challenge_EarlyBirds if you would like to be entered in the challenge.   Week 1 Results:  Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1.  @Mathieu_Paris 1.   @SpongYe 2.  @Dhanush 2.   @Deenuji 3.  n/a3.   @Nived_Nambiar  4.  n/a4.   @ManishSolanki 5.  n/a5.    n/a

Your Moment to Shine: 2024 PPCC’s Got Power Awards Show

For the third year, we invite you, our talented community members, to participate in the grand 2024 Power Platform Community Conference's Got Power Awards. This event is your opportunity to showcase solutions that make a significant business impact, highlight extensive use of Power Platform products, demonstrate good governance, or tell an inspirational story. Share your success stories, inspire your peers, and show off some hidden talents.  This is your time to shine and bring your creations into the spotlight!  Make your mark, inspire others and leave a lasting impression. Sign up today for a chance to showcase your solution and win the coveted 2024 PPCC’s Got Power Award. This year we have three categories for you to participate in: Technical Solution Demo, Storytelling, and Hidden Talent.      The Technical solution demo category showcases your applications, automated workflows, copilot agentic experiences, web pages, AI capabilities, dashboards, and/or more. We want to see your most impactful Power Platform solutions!  The Storytelling category is where you can share your inspiring story, and the Hidden Talent category is where your talents (such as singing, dancing, jump roping, etc.) can shine! Submission Details:  Fill out the submission form https://aka.ms/PPCCGotPowerSignup by July 12th with details and a 2–5-minute video showcasing your Solution impact. (Please let us know you're coming to PPCC, too!)After review by a panel of Microsoft judges, the top storytellers will be invited to present a virtual demo presentation to the judges during early August. You’ll be notified soon after if you have been selected as a finalist to share your story live at PPCC’s Got Power!  The live show will feature the solution demos and storytelling talents of the top contestants, winner announcements, and the opportunity to network with your community.  It's not just a showcase for technical talent and storytelling showmanship, show it's a golden opportunity to make connections and celebrate our Community together! Let's make this a memorable event! See you there!   Mark your calendars! Date and Time: Thursday, Sept 19th Location: PPCC24 at the MGM Grand, Las Vegas, NV 

Tuesday Tip | Accepting Solutions

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   To enhance our collaborative environment, it's important to acknowledge when your question has been answered satisfactorily. Here's a quick guide on how to accept a solution to your questions: Find the Helpful Reply: Navigate to the reply that has effectively answered your question.Accept as Solution: Look for the "Accept as Solution" button or link, usually located at the bottom of the reply.Confirm Your Selection: Clicking this button may prompt you for confirmation. Go ahead and confirm that this is indeed the solution.Acknowledgment: Once accepted, the reply will be highlighted, and the original post will be marked as "Solved". This helps other community members find the same solution quickly. By marking a reply as an accepted solution, you not only thank the person who helped you but also make it easier for others with similar questions to find answers. Let's continue to support each other by recognizing helpful contributions. 

Reminder: To register for the Community Ambassador Call on June 13th

Calling all Super Users & User Group Leaders     Reminder: To register for the Community Ambassador Call on June 13th—for an exclusive event for User Group Leaders and Super Users! This month is packed with exciting updates and activities within our community.   What's Happening: Community Updates: We'll share the latest developments and what's new in our vibrant community.Special Guest Speaker: Get ready for an insightful talk and live demo of Microsoft Copilot Studio templates by our special guest.Regular Updates: Stay informed with our routine updates for User Groups and Super Users.Community Insights: We'll provide general information about ongoing and upcoming community initiatives. Don't Miss Out: Register Now: Choose the session that fits your schedule best.Check your private messages or Super User Forum for registration links. We're excited to connect with you and continue building a stronger community together.   See you at the call!  

Top Solution Authors
Top Kudoed Authors
Users online (3,560)