cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Caleb62881177
Post Prodigy
Post Prodigy

Count Concatenated DisplayNames in SharePoint

Good Day Everyone,

 

I got a SharePoint list that has a column with DisplayNames Concatenated to together.

I would like to see if the current user of the app DisplayName is in that column and Countrow the DisplayName if possible.

 

Example:

Column1

DisplayName1;DisplayName2;DisplayName3;DisplayName4 

 

Please help me.

8 ACCEPTED SOLUTIONS

Accepted Solutions
Amik
Super User
Super User

@Caleb62881177 - I am assuming your DisplayNames column is a multi-select People Picker column in SharePoint? Or is it actually Single Line Text?

 

For a People Picker, you can apply the following to a Label to check if the current logged in user exists in that column:

 

With(
    {
        _data: Filter(
            Ungroup(
                ForAll(
                    'Your SharePoint List',
                    Split(
                        Concat(
                            'Your People Column',
                            DisplayName & ";"
                        ),
                        ";"
                    )
                ),
                "Value"
            ),
            Value = Office365Users.MyProfileV2().displayName
        )
    },
    CountRows(_data) > 0
)

 

To count the number of instances the logged user appears in that column, simply remove "> 0 " from the above expression:

 

With(
    {
        _data: Filter(
            Ungroup(
                ForAll(
                    'Your SharePoint List',
                    Split(
                        Concat(
                            'Your People Column',
                            DisplayName & ";"
                        ),
                        ";"
                    )
                ),
                "Value"
            ),
            Value = Office365Users.MyProfileV2().displayName
        )
    },
    CountRows(_data)
)

 

For a Single Line Text Column, a similar principle would apply, except you do not need the Concat function:

 

With(
    {
        _data: Filter(
            Ungroup(
                ForAll(
                    'Your SharePoint List',
                    Split(
                        DisplayName,
                        ";"
                    )
                ),
                "Value"
            ),
            Value = Office365Users.MyProfileV2().displayName
        )
    },
    CountRows(_data)
)

 

 

Notes:

  • You will need to add the Office365Users connector into your app to run any of the above expressions.

 


------------------------------------------------------------------------------------------------------------------------------


If I have answered your question, please mark your post as Solved. Remember, you can accept more than one post as a solution.

If you like my response, please give it a Thumbs Up.

Imran-Ami Khan

View solution in original post

Amik
Super User
Super User

@Caleb62881177 - same principle, use another With function to return a count from the Full Report table, and then sum both results:

 

With(
    {
        _data: Filter(
            Ungroup(
                ForAll(
                    'Your SharePoint List',
                    Split(
                        DisplayName,
                        ";"
                    )
                ),
                "Value"
            ),
            Value = Office365Users.MyProfileV2().displayName
        )
    },
    With(
        {
            _fullreport: Filter(
                Ungroup(
                    ForAll(
                        'Full Report',
                        Split(
                            Nominee,
                            ";"
                        )
                    ),
                    "Value"
                ),
                Value = Office365Users.MyProfileV2().displayName
            )
        },
        Sum(
            CountRows(_data),
            CountRows(_fullreport)
        )
    )
)

 

 


------------------------------------------------------------------------------------------------------------------------------


If I have answered your question, please mark your post as Solved. Remember, you can accept more than one post as a solution.

If you like my response, please give it a Thumbs Up.

Imran-Ami Khan

View solution in original post

Amik
Super User
Super User

@Caleb62881177 - if Full Report table does not contain concatenated Display Names, then the second solution I provided was wrong - the use of the For All and the Concat function would have been pointless because they were only relevant for concatenated fields with a delimiter. 

 

Anyway, in answer to your third question, use:

 

With(
    {
        _data: Filter(
            Ungroup(
                ForAll(
                    'Your SharePoint List',
                    Split(
                        DisplayName,
                        ";"
                    )
                ),
                "Value"
            ),
            Value = Office365Users.MyProfileV2().displayName
        )
    },

    With(
        {
            _fullreport: Filter(
                ForAll(
                    Distinct(
                        'Full Report',
                        ThisRecord

                    ),
                    Value
                ),
                Nominee = Office365Users.MyProfileV2().displayName
            )
        },
        Sum(
            CountRows(_data),
            CountRows(_fullreport)
        )
    )
)
//The ThisRecord property allows an entire record rather than an individual field. This can be used to remove duplicate rows with one line of code.

 

 

 

 


------------------------------------------------------------------------------------------------------------------------------


If I have answered your question, please mark your post as Solved. Remember, you can accept more than one post as a solution.

If you like my response, please give it a Thumbs Up.

Imran-Ami Khan

View solution in original post

Amik
Super User
Super User

@Caleb62881177 to do this, you're going to need an index or integer column in your SharePoint list, then run a sort against that index to uniquely identify the previous row. 

 

Although there is an Index function in Power Apps, this function is not designed to automatically index a table. So if you do not already have an index, you can run the following workaround with a Collection.

 

Consider the example below:

 

ClearCollect(
    MyExampleTable,
    {TextColumn: "Text1", DateColumn: Date(2019,1,1), ColumnIndex: 0},
    {TextColumn: "Text1", DateColumn: Date(2019,1,1), ColumnIndex: 0},
    {TextColumn: "Text2", DateColumn: Date(2020,1,1), ColumnIndex: 0},
    {TextColumn: "Text2", DateColumn: Date(2020,1,1), ColumnIndex: 0},
    {TextColumn: "Text3", DateColumn: Date(2021,1,1), ColumnIndex: 0},
    {TextColumn: "Text4", DateColumn: Date(2022,1,1), ColumnIndex: 0},
    {TextColumn: "Text5", DateColumn: Date(2023,1,1), ColumnIndex: 0}
);
ClearCollect(
    IndexedCollection,
    ForAll(
        Sequence(CountRows(MyExampleTable)),
        Patch(
            MyExampleTable,
            Last(
                FirstN(
                    MyExampleTable,
                    Value
                )
            ),
            {ColumnIndex: Value}
        )
    )
)

 

Unfortunately, as far as I am aware it is not possible to compare a record with another record, so you will need to go the long way and compare each column in the current record with each column in the previous record to confirm if both records are the same.

 

For example, apply the below to a Label. This expression will evaluate whether all columns in the current row match all columns in the previous row, then Filter the output where the TextColumn = "Text1", and then finally wrap the result with a CountRows function to get the number of rows.

 

CountRows(
    Filter(
        AddColumns(
            AddColumns(
                MyExampleTable,
                "_record_previous",
                ColumnIndex - 1
            ),
            "_record_equals_previous",
            LookUp(
                MyExampleTable,
                ColumnIndex = _record_previous,
                TextColumn
            ) = ThisRecord.TextColumn && LookUp(
                MyExampleTable,
                ColumnIndex = _record_previous,
                DateColumn
            ) = ThisRecord.DateColumn
        ),
        !Boolean(_record_equals_previous) && TextColumn = "Text1"
    )
)

 

 

 


------------------------------------------------------------------------------------------------------------------------------


If I have answered your question, please mark your post as Solved. Remember, you can accept more than one post as a solution.

If you like my response, please give it a Thumbs Up.

Imran-Ami Khan

View solution in original post

Amik
Super User
Super User

@Caleb62881177 - yes, as mentioned in my earlier post you're likely going to need to handle that error with an IfError function if those Display Names do not exist in Office 365 Users.

 

See below:

 

Concat(
    AddColumns(
        AddColumns(
            Filter(
                RenameColumns(//split returns a single table column called "Value". optionally renamed the column to understand what is going on
                    Split(
                        Concat(
                            myDisplayNames,
                            Nominee & ";"
                        ),
                        ";"
                    ),
                    "Value",
                    "DisplayName"
                ),
                DisplayName <> ""
            ),
            "_get_email",
            First(Office365Users.SearchUser({searchTerm: DisplayName})).Mail//use the SearchUser action to get the Mail attribute
        ),
        "_department",
        IfError( //handle if the user does not exist
            Office365Users.UserProfile(_get_email).Department,
            ""
        )
    ),
    _department,
    ";"
)

 

DropColumns(
    AddColumns(
        GroupBy(
            DropColumns(
                AddColumns(
                    AddColumns(
                        Filter(
                            RenameColumns(//split returns a single table column called "Value". optionally renamed the column to understand what is going on
                                Split(
                                    Concat(
                                        myDisplayNames,
                                        Nominee & ";"
                                    ),
                                    ";"
                                ),
                                "Value",
                                "DisplayName"
                            ),
                            DisplayName <> ""
                        ),
                        "_get_email",
                        First(Office365Users.SearchUser({searchTerm: DisplayName})).Mail//use the SearchUser action to get the Mail attribute
                    ),
                    "_department",
                    IfError(//handle if the user does not exist
                        Office365Users.UserProfile(_get_email).Department,
                        ""
                    )
                ),
                "_get_email"
            ),
            "DisplayName",
            "GroupedItems"
        ),
        "Departments",
        Concat(
            GroupedItems,
            _department,
            ";"
        )
    ),
    "GroupedItems"
)

 

 


------------------------------------------------------------------------------------------------------------------------------


If I have answered your question, please mark your post as Solved. Remember, you can accept more than one post as a solution.

If you like my response, please give it a Thumbs Up.

Imran-Ami Khan

View solution in original post

Amik
Super User
Super User

@Caleb62881177 thanks that is much clearer. Try wrapping the Split function with Trim:

 

With(
    {
        _data: Filter(
            Ungroup(
                ForAll(
                    myDisplayNames,
                    Trim(
                        Split(
                            Nominee,
                            ";"
                        )
                    )
                ),
                "Value"
            ),
            Value = "DisplayName1"
        )
    },
    CountRows(_data)
)

 

 

 


------------------------------------------------------------------------------------------------------------------------------


If I have answered your question, please mark your post as Solved. Remember, you can accept more than one post as a solution.

If you like my response, please give it a Thumbs Up.

Imran-Ami Khan

View solution in original post

Amik
Super User
Super User

@Caleb62881177 - you mean if Today's date is greater than or equal to Date Picker 1, but is less than or equal to Date Picker 2, disable the Button?


Apply the below to the DisplayMode property of the Button

If(
    Today() >= DatePicker1.SelectedDate && Today() <= DatePicker2.SelectedDate,
    DisplayMode.Disabled,
    DisplayMode.Edit
) 

 

 


------------------------------------------------------------------------------------------------------------------------------


If I have answered your question, please mark your post as Solved. Remember, you can accept more than one post as a solution.

If you like my response, please give it a Thumbs Up.

Imran-Ami Khan

View solution in original post

Amik
Super User
Super User

@Caleb62881177 - I am not quite understanding your expressions and what purpose they serve.

 

But if we focus on removing records where "the Nominee, Nominator and Category that has the same value", then GroupBy would be most applicable here.

 

Suppose we have the following Collection:

 

ClearCollect(MySampleData, 
            {Nominee: "DisplayNameX", Nominator: "DisplayNameX", Category: "CategoryX", Jude: "JudgeName1"},
            {Nominee: "DisplayNameX", Nominator: "DisplayNameX", Category: "CategoryX", Jude: "JudgeName2"},
            {Nominee: "DisplayName1", Nominator: "DisplayName2", Category: "Category1", Jude: "JudgeName1"},
            {Nominee: "DisplayName1", Nominator: "DisplayName2", Category: "Category1", Jude: "JudgeName2"},
            {Nominee: "DisplayName3", Nominator: "DisplayName1", Category: "Category2", Jude: "JudgeName2"},
            {Nominee: "DisplayName2", Nominator: "DisplayName2", Category: "Category3", Jude: "JudgeName2"},
            {Nominee: "DisplayName1", Nominator: "DisplayName3", Category: "Category2", Jude: "JudgeName3"}
            )

 

All rows in this collection are unique. If we want to remove rows where the first three columns (Nominee, Nominator and Category are the same), we can use:

 

ClearCollect(
    MyCollection,
    DropColumns(
        AddColumns(
            GroupBy(
                MySampleData,
                "Nominee",
                "Nominator",
                "Category",
                "GroupedItems"
            ) As temp,
            "Jude",
            LookUp(
                MySampleData,
                Nominee = temp.Nominee,
                Jude
            )
        ),
        "GroupedItems"
    )
)

 

 


------------------------------------------------------------------------------------------------------------------------------


If I have answered your question, please mark your post as Solved. Remember, you can accept more than one post as a solution.

If you like my response, please give it a Thumbs Up.

Imran-Ami Khan

View solution in original post

60 REPLIES 60
Amik
Super User
Super User

@Caleb62881177 - I am assuming your DisplayNames column is a multi-select People Picker column in SharePoint? Or is it actually Single Line Text?

 

For a People Picker, you can apply the following to a Label to check if the current logged in user exists in that column:

 

With(
    {
        _data: Filter(
            Ungroup(
                ForAll(
                    'Your SharePoint List',
                    Split(
                        Concat(
                            'Your People Column',
                            DisplayName & ";"
                        ),
                        ";"
                    )
                ),
                "Value"
            ),
            Value = Office365Users.MyProfileV2().displayName
        )
    },
    CountRows(_data) > 0
)

 

To count the number of instances the logged user appears in that column, simply remove "> 0 " from the above expression:

 

With(
    {
        _data: Filter(
            Ungroup(
                ForAll(
                    'Your SharePoint List',
                    Split(
                        Concat(
                            'Your People Column',
                            DisplayName & ";"
                        ),
                        ";"
                    )
                ),
                "Value"
            ),
            Value = Office365Users.MyProfileV2().displayName
        )
    },
    CountRows(_data)
)

 

For a Single Line Text Column, a similar principle would apply, except you do not need the Concat function:

 

With(
    {
        _data: Filter(
            Ungroup(
                ForAll(
                    'Your SharePoint List',
                    Split(
                        DisplayName,
                        ";"
                    )
                ),
                "Value"
            ),
            Value = Office365Users.MyProfileV2().displayName
        )
    },
    CountRows(_data)
)

 

 

Notes:

  • You will need to add the Office365Users connector into your app to run any of the above expressions.

 


------------------------------------------------------------------------------------------------------------------------------


If I have answered your question, please mark your post as Solved. Remember, you can accept more than one post as a solution.

If you like my response, please give it a Thumbs Up.

Imran-Ami Khan

SpongYe
Super User
Super User

Hi @Caleb62881177 

 

I achieved this by doing:

CountRows(MatchAll(Concat(colTestNames, Column1, ";"), "DisplayName1"))

SpongYe_0-1695292147375.png


-----------------------
PowerYsa Power Platform Enthusiast [LinkedIn] | [Youtube]

I love to share my knowledge and learn from others. If you find my posts helpful, please give them a thumbs up 👍 or mark them as a solution ✔️. You can also check out my [@PowerYSA] for some cool solutions and insights. Feel free to connect with me on any of the platforms above. Cheers! 🍻

 

Caleb62881177
Post Prodigy
Post Prodigy

It's a Single Line Text column.

SpongYe
Super User
Super User

Hi @Caleb62881177 

 

Try this:

 

CountRows(Filter(Split(Label1.Text, ";"), Value = "DisplayName1"))

 

 

-----------------------
PowerYsa Power Platform Enthusiast [LinkedIn] | [Youtube]

I love to share my knowledge and learn from others. If you find my posts helpful, please give them a thumbs up 👍 or mark them as a solution ✔️. You can also check out my [@PowerYSA] for some cool solutions and insights. Feel free to connect with me on any of the platforms above. Cheers! 🍻

@Caleb62881177 - there is a solution for Single Line Text in my response.

 

 


------------------------------------------------------------------------------------------------------------------------------


If I have answered your question, please mark your post as Solved. Remember, you can accept more than one post as a solution.

If you like my response, please give it a Thumbs Up.

Imran-Ami Khan

Caleb62881177
Post Prodigy
Post Prodigy

@Amik , Thank you for you help. The formula worked for The Single Line.

Can you help me modify the formula below to check two different SP List for a DisplayName and Return a numeric value instead of True or False value?

 

errorr5.jpg

Amik
Super User
Super User

@Caleb62881177 please remember to accept the Solution for the first question.

 

I have a couple of questions on your second requirement:

 

  1. What is the field type for Nominee? Is it also Single Line Text?
  2. Is the 'Full Report' table also a SharePoint List?
  3. Do you want to SUM to the count of display names in both lists?

 


------------------------------------------------------------------------------------------------------------------------------


If I have answered your question, please mark your post as Solved. Remember, you can accept more than one post as a solution.

If you like my response, please give it a Thumbs Up.

Imran-Ami Khan

Amik
Super User
Super User

@Caleb62881177 please remember to accept the Solution for the first question.

 

I have a couple of questions on your second requirement:

 

  1. What is the field type for Nominee? Is it also Single Line Text?
  2. Is the 'Full Report' table also a SharePoint List?
  3. Do you want to SUM to the count of display names in both lists?

 


------------------------------------------------------------------------------------------------------------------------------


If I have answered your question, please mark your post as Solved. Remember, you can accept more than one post as a solution.

If you like my response, please give it a Thumbs Up.

Imran-Ami Khan

Caleb62881177
Post Prodigy
Post Prodigy

Hi @Amik ,

 

Sorry for responding now.

 

Nominee is a Single Line Text.

Full Report is a SharePoint List.

I want to check if that Display is present in Countrows  or with the formula you provided and add that up.

Helpful resources

Announcements

Announcing Power Apps Copilot Cookbook Gallery

We are excited to share that the all-new Copilot Cookbook Gallery for Power Apps is now available in the Power Apps Community, full of tips and tricks on how to best use Microsoft Copilot as you develop and create in Power Apps. The new Copilot Cookbook is your go-to resource when you need inspiration--or when you're stuck--and aren't sure how to best partner with Copilot while creating apps.   Whether you're looking for the best prompts or just want to know about responsible AI use, visit Copilot Cookbook for regular updates you can rely on--while also serving up some of your greatest tips and tricks for the Community. Our team will be reviewing posts using the new "Copilot" label to ensure we highlight and amplify the most relevant and recent content, so you're assured of high-quality content every time you visit. If you share a post that gets featured in the curated gallery, you'll get a PM in the Community to let you know!The curated gallery is ready for you to experience now, so visit the new Copilot Cookbook for Power Apps today: Copilot Cookbook - Power Platform Community. We can't wait to see what you "cook" up!      

Tuesday Tips: Getting Started in the Community

TUESDAY TIPS is back!   This weekly series of posts is our way of sharing helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! The original run of Tuesday Tips was a highlight of last year, and these all-new Tips will hopefully prove to be just as informative as helpful. We will cover some basics about the Community, a few "insider tips" to make your experience even better, and sharing best practices gleaned from our most active community members and Super Users. Make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   THIS WEEK: I'm Brand New! What Do I Do? The number of new community members we have each week is pretty amazing, and we are so glad to welcome all of you to the Community! You may be wondering. "What do I do? Where do I get started? Will anyone be willing to help me? What I have a question? Help!"   Let's start with this: Welcome to the low-code revolution, and more importantly, welcome to the Power Platform Community! This is a great place to start. Whether you're busy with Power Apps, getting familiar with Power Automate, engaging Copilot Studio, or building in Power Pages, there are a few key places you should check out as you begin your journey: FORUMS: The forums are THE place to ask questions, look at questions asked by other Community members—and see answers and solutions from our Super Users and other helpful people in the Community. Power Apps ForumsPower Automate ForumsCopilot Studio ForumsPower Pages Forums   NEWS & ANNOUNCEMENTS: Our News & Announcements section highlights the newest and greatest updates in the Community, news from the product team, and so much more. It’s updated a few times each week and will also help you find ways to connect with what’s going on in the ever-growing world of Power Platform. Power Apps News & AnnouncementsPower Automate News & AnnouncementsCopilot Studio News & AnnouncementsPower Pages News & Announcements   GALLERIES: The Galleries section of the Community features tons of tips and tricks, features and benefits, and more—through videos created by our Super Users, product teams, and other helpful members of the Community. Power Apps GalleriesPower Automate Galleries Copilot Studio GalleriesPower Pages Galleries BLOGS: The community blogs section is full of handy step-by-step tips from members of the Community—and some of them include detailed answers to some of the questions most frequently asked questions, as well as how they solved a problem they faced. Power Apps Community BlogPower Automate Community BlogCopilot Studio Community BlogPower Pages Community Blog POWER UP PROGRAM: If you’d like to really take a huge step forward in your journey, we recommend checking out the Power Up Program, a Microsoft-sponsored initiative that trains new Power Platform users and has been a huge success since it launched a little over a year ago. There’s a waiting list, so definitely apply soon if you’re interested! Find out more here: Microsoft Power Up Program for career switchers.   There's so much more you'll discover in your Power Platform experience, and this Community is here for YOU! We are glad you've discovered us and can't wait to see where you grow! If you're new to the Community and just getting started, make sure to give this post a kudo and introduce yourself so we can welcome you!

Super User of the Month | Drew Poggemann

As part of a new monthly feature in the Community, we are excited to share that Drew Poggemann is our featured Super User for the month of February 2024. If you've been in the Community for a while, we're sure Drew's name is familiar to you, as he is one of our most active contributors--he's been a Super User for five consecutive seasons!   Since authoring his first reply 5 years ago to his 514th solution authored, Drew has helped countless Community members with his insights and expertise. In addition to being a Super User, Drew is also a User Group leader and a Microsoft MVP. His contributions to our Super User sessions and to the new SUIT program are always welcome--as well as his sense of humor and fun-loving way of sharing what he knows with others.   When Drew is not solving problems and authoring solutions, he's busy overseeing the Solution Architecture team at HBS, specializing in application architecture and business solution strategy--something he's been doing for over 30 years. We are grateful for Drew and the amazing way he has used his talent and skills to help so many others in the Community. If you are part of the SUIT program, you got to hear some great tips from Drew at the first SUIT session--and we know he still has much more to share!You can find him in the Community and on LinkedIn. Thank you for all you do, Drew!

Celebrating a New Season of Super Users with Charles Lamanna, CVP Microsoft Business Applications

February 8 was the kickoff to the 2024 Season One Super User program for Power Platform Communities, and we are thrilled to welcome back so many returning Super Users--as well as so many brand new Super Users who started their journey last fall. Our Community Super Users are the true heroes, answering questions, providing solutions, filtering spam, and so much more. The impact they make on the Communities each day is significant, and we wanted to do something special to welcome them at our first kickoff meeting of the year.   Charles Lamanna, Microsoft CVP of Business Applications, has stressed frequently how valuable our Community is to the growth and potential of Power Platform, and we are honored to share this message from him to our 2024 Season One Super Users--as well as anyone who might be interested in joining this elite group of Community members.     If you want to know more about Super Users, check out these posts for more information today:    Power Apps: What is A Super User? - Power Platform CommunityPower Automate: What is A Super User? - Power Platform Community Copilot Studio: What is A Super User? - Power Platform Community Power Pages: What is A Super User? - Power Platform Community

February 2024 User Group Update: Welcoming New Groups and Highlighting Upcoming Events

It's a new month and a brand-new year, which means another opportunity to celebrate our amazing User Groups!Each month, we highlight the new User Groups that have joined the community. It's been a busy season for new groups, because we are thrilled to welcome 15 New User Groups! Take a look at the list below, shared by the different community categories. If your group is listed here, give this post a kudo so we can celebrate with you!   We love our User Groups and the difference they make in the lives of our Community! Thank you to all the new User Groups, new User Group leaders--we look forward to hearing about your successes and the impact you will leave!   In addition to our monthly New User Group spotlight, it's a great time to share some of the latest events happening in our User Group community! Take a look at the list below to find one that fits your schedule and need! There's a great combination of in-person and virtual events to choose from. It's a great time of year to connect and engage with User Groups both locally and online. Please Welcome Our NEW User Groups   Power Platform: Heathcare Power Platform User Group Power Platform Connect Hub Power Platform Usergroup Denmark Mexico Norte- Power Platform User Group Pune Power User Group Sudbury Power Platform User GroupMicrosoft User Group GhanaMPPBLR - Microsoft Power Platform Bengaluru User Group Power Apps:   Myrtle Beach Power Platform User GroupAnanseTechWB PowerApps Copilot Studio: Pathfinders Power Platform Community Dynamics365: Cairo, Egypt MSD 365 Business Central/NAV/F&O User GruopMS Dynamics 365 Business Central LatamCincinnati OH D365 F&O User Group February User Group Events February 2024 Cleveland Power Platform User GroupPortallunsj - Februar 2024Indiana D365/AX February User Group MeetingQ1 2024 KC Power Platform and Dynamics 365 CRM Users Group 

Super Users 2024 Season One is Here!

   We are excited to announce the first season of our 2024 Super Users is here! Our kickoff to the new year welcomes many returning Super Users and several new faces, and it's always exciting to see the impact these incredible individuals will have on the Community in 2024! We are so grateful for the daily difference they make in the Community already and know they will keep staying engaged and excited for all that will happen this year.   How to Spot a Super User in the Community:Have you ever written a post or asked for help in the Community and had it answered by a user with the Super User icon next to their name? It means you have found the actual, real-life superheroes of the Power Platform Community! Super Users are our heroes because of the way they consistently make a difference in the Community. Our amazing Super Users help keep the Community a safe place by flagging spam and letting the Community Managers know about issues. They also make the Community a great place to find answers, because they are often the first to offer solutions and get clarity on questions. Finally, Super Users share valuable insights on ways to keep the Community growing, engaging, and looking ahead!We are honored to reveal the new badges for this season of Super Users! Congratulations to all the new and returning Super Users!     To better answer the question "What is a Super User?" please check out this article: Power Apps: What is A Super User? - Power Platform CommunityPower Automate: What is A Super User? - Power Platform Community Copilot Studio: What is A Super User? - Power Platform Community Power Pages: What is A Super User? - Power Platform Community

Top Solution Authors
Top Kudoed Authors
Users online (2,861)