cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Salamander94
Helper IV
Helper IV

Create title based on user's initials and a successive number

I am creating a purchase order app.  I need the title of the P.O. to look like this "LOG-AA-0003"  (AA being the user's initials).  I need the numbers to be successive based on the user.  so if John Doe were to start a P.O., his P.O.'s number would be based off of his last entry, not the latest entry (I hope that makes sense).  At any rate, I don't have a whole ton of users that will be using this so I am okay with having to code everyone in if that's how it must be.  This is the code I have so far: 

"LOG-" & If(User().FullName = "Alexander Salamander", "AS", "NO") & "-" 

I have no idea how to get a succesive number.  I have the data sitting on one excel sheet.  One table has the P.O. information like the date and vendor.  The other table is strictly for items.  I did this because people might have multiple items for one P.O.  My idea, in order to keep them under the same P.O., was to have the first table's P.O. number fill in the "title" spot for each item so the P.O remained the same for the items they order on the second table.  

 

Another user suggested this:

Hi @Salamander94 ,

Could you please share a bit more about the data source you used in your app? Is it a SP List?

Could you please share a bit more about the data structure of your data source?

Further, do you want to generate the Title field based on the users initials then a successive number?

 

Based on the needs that you mentioned, I have made a test on my side, please take a try with the following workaround:3.JPG

 

4.JPG

Unlock the Title Data card within the Edit form, set the Default property of the Text Input box to following:

"LOG-"&
Left(First(Split(CurrentUser," ")).Result,1) & Left(Last(Split(CurrentUser," ")).Result,1) & "-" &
If(
    Len(Text(Value(Last(Split(
      Last(Filter('20190611_case8', "LOG-"&Left(First(Split(CurrentUser," ")).Result,1) & Left(Last(Split(CurrentUser," ")).Result,1) in Title)).Title,
      "-"
)).Result)+1))=1,
    "000"&Value(Last(Split(Last(Filter('20190611_case8', "LOG-"&Left(First(Split(CurrentUser," ")).Result,1) & Left(Last(Split(CurrentUser," ")).Result,1) in Title)).Title,
      "-"
)).Result)+1,
    Len(Text(Value(Last(Split(
      Last(Filter('20190611_case8', "LOG-"&Left(First(Split(CurrentUser," ")).Result,1) & Left(Last(Split(CurrentUser," ")).Result,1) in Title)).Title,
      "-"
)).Result)+1))=2,
    "00"&Value(Last(Split(Last(Filter('20190611_case8', "LOG-"&Left(First(Split(CurrentUser," ")).Result,1) & Left(Last(Split(CurrentUser," ")).Result,1) in Title)).Title,
      "-"
)).Result)+1,
    Len(Text(Value(Last(Split(
      Last(Filter('20190611_case8', "LOG-"&Left(First(Split(CurrentUser," ")).Result,1) & Left(Last(Split(CurrentUser," ")).Result,1) in Title)).Title,
      "-"
)).Result)+1))=3,
   "0"&Value(Last(Split(Last(Filter('20190611_case8', "LOG-"&Left(First(Split(CurrentUser," ")).Result,1) & Left(Last(Split(CurrentUser," ")).Result,1) in Title)).Title,
      "-"
)).Result)+1,
   Value(Last(Split(Last(Filter('20190611_case8', "LOG-"&Left(First(Split(CurrentUser," ")).Result,1) & Left(Last(Split(CurrentUser," ")).Result,1) in Title)).Title,
      "-"
)).Result)+1
)

Note: The CurrentUser is a variable in my app, which used to store the Display Name of the current sign in user. The '20190611_case8' represents my SP List data source.

On your side, you should type:

If(
   EditForm1.Mode = FormMode.New,
   "LOG-"& 
Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) & "-" &
If(
Len(Text(Value(Last(Split(Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result)+1)) = 1,
"000"&Value(Last(Split(Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result) + 1,
Len(Text(Value(Last(Split( Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result)+1)) = 2,
"00"&Value(Last(Split(Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result) + 1,
Len(Text(Value(Last(Split( Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result)+1)) = 3,
"0"&Value(Last(Split(Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result) + 1,
Value(Last(Split(Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result) + 1
), Parent.Default )

Note: The Title column represents the Title column in your data source, which used to store the generated title value.

 

Please consider take a try with above solution, then check if the issue is solved.

 

Best regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
 
However, I have no idea where to put the final batch of code.  So I can't use it. 
3 ACCEPTED SOLUTIONS

Accepted Solutions

@Salamander94 

If you're still looking for a solution for this one, you might want to consider this formula for your Default property of your DataCard:

If(yourFormName.Mode=FormMode.New,
  "LOG-" & Concat(Split(User().FullName, " "), Left(Result,1)) & "-" &
  Text(
      Value(
          Last(
              Split(
                  First(
                      SortByColumns(
                          Filter(yourDataSource, StartsWith(yourPOcolumn,  "LOG-" & Concat(Split(User().FullName, " "), Left(Result,1)))), 
                          "Title", 
                          Descending)
                       ).yourPOcolumn, 
                   "-")).Result
            ) +1, "0000"),
 ThisItem.yourPOcolumn)

This should give you the results you are looking for without having to resort to another list to store the last number.

 

I hope this is helpful for you.

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

View solution in original post

v-xida-msft
Community Support
Community Support

Hi @Salamander94 ,

I found that you have posted similar thread in this forum, please check my response within the following thread:

https://powerusers.microsoft.com/t5/General-Discussion/Create-an-quot-in-succession-numberic-title-q...

 

Actually, the second formula I provided within your previous thread should be set within the Default property of the Text Input box within the Title Data card in your Edit form.

On your side, please set the Default property of the Text Input box within the Title data card in your Edit form to following:

If(
   EditForm1.Mode = FormMode.New,    /* <-- Check if you are open a New Form or a Edit form. The succesive number should be generated when you open a NEW Form */
   "LOG-"& 
Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) & "-" &
If(
Len(Text(Value(Last(Split(Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result)+1)) = 1,
"000"&Value(Last(Split(Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result) + 1,
Len(Text(Value(Last(Split( Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result)+1)) = 2,
"00"&Value(Last(Split(Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result) + 1,
Len(Text(Value(Last(Split( Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result)+1)) = 3,
"0"&Value(Last(Split(Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result) + 1,
Value(Last(Split(Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result) + 1
), Parent.Default )

4.JPG

 

Please consider take a try with above solution, then check if the issue is solved.

 

Best regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

@Anonymous 

As the formula I provided is written, yes there would be a delegation issue.  However, it's actually very easily solved.

The reason there is a delegation issue is because of the computation that goes on in the Filter statement (shown in red below).

If(yourFormName.Mode=FormMode.New,
  "LOG-" & Concat(Split(User().FullName, " "), Left(Result,1)) & "-" &
  Text(
      Value(
          Last(
              Split(
                  First(
                      SortByColumns(
                          Filter(yourDataSource, StartsWith(yourPOcolumn,  "LOG-" & Concat(Split(User().FullName, " "), Left(Result,1)))), 
                          "Title", 
                          Descending)
                       ).yourPOcolumn, 
                   "-")).Result
            ) +1, "0000"),
 ThisItem.yourPOcolumn)

If that part is removed and calculated into a variable (let's say on the OnVisible):

Set(myLog, "LOG-" & Concat(Split(User().FullName, " "), Left(Result,1)))

And the Default property on the datacard modified to this:

If(yourFormName.Mode=FormMode.New, 
   "LOG-" & Concat(Split(User().FullName, " "), Left(Result,1)) & "-" & 
   Text( 
         Value( 
              Last( 
                   Split( 
                        First( 
                             SortByColumns( 
                                    Filter(yourDataSource, StartsWith(yourPOcolumn, myLog)), 
                                   "Title", 
                                   Descending) 
                             ).yourPOcolumn, 
                      "-")).Result 
                 ) +1, "0000"), 
  ThisItem.yourPOcolumn
)

The delegation issue goes away.

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

View solution in original post

11 REPLIES 11
Anonymous
Not applicable

Here is a link how you can do that with SharePoint lists:

https://365basics.com/powerapps-form-in-sharepoint-create-a-configurable-auto-incrementing-column-wi...

The 1st list would be your purchase app.

The 2nd list would have all counters per each user so that each user gets their own incremented number.

Now I do see you are using an Excel file so my reply is not completely spot on; however, I don't see why it wouldn't work with Excel. Take a look either way.

 

Thank you for that.  Unfortunetly I won't be able to use it for my app, but it has jogged my brain a bit!

@Salamander94 

If you're still looking for a solution for this one, you might want to consider this formula for your Default property of your DataCard:

If(yourFormName.Mode=FormMode.New,
  "LOG-" & Concat(Split(User().FullName, " "), Left(Result,1)) & "-" &
  Text(
      Value(
          Last(
              Split(
                  First(
                      SortByColumns(
                          Filter(yourDataSource, StartsWith(yourPOcolumn,  "LOG-" & Concat(Split(User().FullName, " "), Left(Result,1)))), 
                          "Title", 
                          Descending)
                       ).yourPOcolumn, 
                   "-")).Result
            ) +1, "0000"),
 ThisItem.yourPOcolumn)

This should give you the results you are looking for without having to resort to another list to store the last number.

 

I hope this is helpful for you.

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!
v-xida-msft
Community Support
Community Support

Hi @Salamander94 ,

I found that you have posted similar thread in this forum, please check my response within the following thread:

https://powerusers.microsoft.com/t5/General-Discussion/Create-an-quot-in-succession-numberic-title-q...

 

Actually, the second formula I provided within your previous thread should be set within the Default property of the Text Input box within the Title Data card in your Edit form.

On your side, please set the Default property of the Text Input box within the Title data card in your Edit form to following:

If(
   EditForm1.Mode = FormMode.New,    /* <-- Check if you are open a New Form or a Edit form. The succesive number should be generated when you open a NEW Form */
   "LOG-"& 
Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) & "-" &
If(
Len(Text(Value(Last(Split(Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result)+1)) = 1,
"000"&Value(Last(Split(Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result) + 1,
Len(Text(Value(Last(Split( Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result)+1)) = 2,
"00"&Value(Last(Split(Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result) + 1,
Len(Text(Value(Last(Split( Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result)+1)) = 3,
"0"&Value(Last(Split(Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result) + 1,
Value(Last(Split(Last(Filter('YourDataSource', "LOG-"&Left(First(Split(User().FullName," ")).Result,1) & Left(Last(Split(User().FullName," ")).Result,1) in Title)).Title, "-" )).Result) + 1
), Parent.Default )

4.JPG

 

Please consider take a try with above solution, then check if the issue is solved.

 

Best regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Anonymous
Not applicable

@RandyHayes Is it not affected by a Delegation limitation?

@Anonymous 

As the formula I provided is written, yes there would be a delegation issue.  However, it's actually very easily solved.

The reason there is a delegation issue is because of the computation that goes on in the Filter statement (shown in red below).

If(yourFormName.Mode=FormMode.New,
  "LOG-" & Concat(Split(User().FullName, " "), Left(Result,1)) & "-" &
  Text(
      Value(
          Last(
              Split(
                  First(
                      SortByColumns(
                          Filter(yourDataSource, StartsWith(yourPOcolumn,  "LOG-" & Concat(Split(User().FullName, " "), Left(Result,1)))), 
                          "Title", 
                          Descending)
                       ).yourPOcolumn, 
                   "-")).Result
            ) +1, "0000"),
 ThisItem.yourPOcolumn)

If that part is removed and calculated into a variable (let's say on the OnVisible):

Set(myLog, "LOG-" & Concat(Split(User().FullName, " "), Left(Result,1)))

And the Default property on the datacard modified to this:

If(yourFormName.Mode=FormMode.New, 
   "LOG-" & Concat(Split(User().FullName, " "), Left(Result,1)) & "-" & 
   Text( 
         Value( 
              Last( 
                   Split( 
                        First( 
                             SortByColumns( 
                                    Filter(yourDataSource, StartsWith(yourPOcolumn, myLog)), 
                                   "Title", 
                                   Descending) 
                             ).yourPOcolumn, 
                      "-")).Result 
                 ) +1, "0000"), 
  ThisItem.yourPOcolumn
)

The delegation issue goes away.

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!
Anonymous
Not applicable

@RandyHayes Yeah, I know, I agree. I just thought it would be good to know for the topic starter.

Your updated approach will work for sure considering each user will have their own counter/incremented number (per topic starter).

I don't think it's gonna work well if it's a shared for all counter since that myLog variable might get the same value when several people work at once.

@Anonymous 

The variable is not shared across apps and users.  It is unique to each user, so there would be no impact from that.  It is completely independent. 

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!
Anonymous
Not applicable

@RandyHayes I meant if you have a unified numeration (e.g. 1,2,3,4,5... or ticket-1,ticket-2,ticket-3...) then that approach wouldn't work as there shouldn't be duplicates. But there would be as the variable is calculated onVisible (not when saved).

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

  It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd. at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3rd, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!       Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪🌠

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

March User Group Update: New Groups and Upcoming Events!

  Welcome to this month’s celebration of our Community User Groups and exciting User Group events. We’re thrilled to introduce some brand-new user groups that have recently joined our vibrant community. Plus, we’ve got a lineup of engaging events you won’t want to miss. Let’s jump right in: New User Groups   Sacramento Power Platform GroupANZ Power Platform COE User GroupPower Platform MongoliaPower Platform User Group OmanPower Platform User Group Delta StateMid Michigan Power Platform Upcoming Events  DUG4MFG - Quarterly Meetup - Microsoft Demand PlanningDate: 19 Mar 2024 | 10:30 AM to 12:30 PM Central America Standard TimeDescription: Dive into the world of manufacturing with a focus on Demand Planning. Learn from industry experts and share your insights. Dynamics User Group HoustonDate: 07 Mar 2024 | 11:00 AM to 01:00 PM Central America Standard TimeDescription: Houston, get ready for an immersive session on Dynamics 365 and the Power Platform. Connect with fellow professionals and expand your knowledge. Reading Dynamics 365 & Power Platform User Group (Q1)Date: 05 Mar 2024 | 06:00 PM to 09:00 PM GMT Standard TimeDescription: Join our virtual meetup for insightful discussions, demos, and community updates. Let’s kick off Q1 with a bang! Leaders, Create Your Events!    Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you!

Top Solution Authors
Top Kudoed Authors
Users online (7,289)