cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Flexible Height Gallery - a Better Way

 So the flexible height gallery control is very limited in usefulness out of the box.  The only controls with "auto height", which this functionality relies on, is the label control and HTML Text control.


I've seen some examples where people have used the Label control (making the text invisible) as a way to dynamically size each row (by adding more text in it), however, this was a bit quirky for me.  And now way to use this to really specify the height of the individual gallery item at a pixel level.

 

So I got to thinking that if the HTML Text control also works with Auto Size (it does), perhaps one could use this by using HTML to create a variable sized (to the pixel) vertical line.  


And yes, it works...  🙂  

 

Let's say your gallery is called Gallery1.  So what you would do is as follows:

 

  1. In Gallery1 add a column to what you have in Items, that will represent the height you want for each individual row.  I'll call this MyHeight for now.  So if I have 3 rows and want the first to be 10 pixels high, the second 20, and the third 30, I would just add these to the table. 

    There are other ways to do this (ie: value of a control within the gallery itself - ie: a slider that would allow the user to dynamically change it, resizing each row on the flow) - however, this depends on your usage.   

  2. Add an "HTML text" control to your gallery - I'll call this HtmlText1.  Set the following on HtmlText1:

    Auto height: ON  (IMPORTANT - and note I've seen PowerApps turn this off automatically sometimes, not sure why, so check it)
    X: 0
    Y: 0
    Width: 1
    Padding: Left: 0, Bottom: 0, Right: 0, Left: 0
    Height: Gallery1.TemplateHeight   (note: this could be any size you want to be the MINIMUM height, but setting it to this will allow you to drag the template size to this minimum)

  3. Now the "magic" here is in the HtmlText setting, so set HtmlText1.HtmlText to:

    "<hr width=1' size='" & ThisItem.MyHeight & "'>"
    (notice the single and double quotes in the above).

    This will create HTML to draw a vertical line 1 pixel wide and "ThisItem.MyHeight" pixels high.  Since the HtmlText1 control has Auto height On, the size of HTML 1 will change based on the length of the line.

    Note: Even though we set padding to 0, it appears that PowerApps will still make the height of the HtmlText1 control to itself be 5 pixels more than the length of the line.  Probably is a way around this, but doesn't matter to me.  

    Also note that there are many ways to specify the height of the line.  If you wanted to do this in a Slider that is within the gallery (letting the user set the individual slider to the size of that row), you could (instead of ThisItem.MyHeight) use ThisItem.Slider1.Value * 10 or something.

  4. And lastly, if you have a Separator line, say Separator1, you'd want to set its Y value to Max( HtmlText1.Height, Gallery1.TemplateHeight )

 

While this still is not a perfect substitute for the Gallery control not REALLY allowing for a flexible size (which it arguably SHOULD do) it does go a long way.  

Hope this helps someone.  If there is a better way to do this, please let me know, I'm very open to a better way.

 

1 ACCEPTED SOLUTION

Accepted Solutions
Anonymous
Not applicable

I'll try to post one for you.

Actually, with some of the changes in PowerApps, (there are still some issues with flexible height galleries), I had to change my approach, but what I've settled on seems to consistently work, regardless of the platform it was running on.  

With the other approach (posted above), I later discovered the sizing would be different depending on whether it was run as an app in Chrome/Chromium or Edge, whether it was running the web development environment, or if running on iOS or Android.  

 

I'm now using a rectangle object (either as a separator (height=1, Y=max height) or bounding rectangle (X=0, Y=0, height = max location of other controls) instead of the HTML.  This seems to work much better now.  I think the HTML approach differed between environments perhaps due to different assumptions those browsers/etc made about HTML spacing.  

To use the "bounding rectangle" approach, I set the X and Y of the rectangle to 0, and then for Height do something like the following:

Max( 
    If( 'FFG - CTRL TEXT INPUT'.Visible,         'FFG - CTRL TEXT INPUT'.Y         + 'FFG - CTRL TEXT INPUT'.Height,       0 ),
    If( 'FFG - CTRL DATE'.Visible,               'FFG - CTRL DATE'.Y               + 'FFG - CTRL DATE'.Height,             0 ),
    If( 'FFG - CTRL DATE RANGE START'.Visible,   'FFG - CTRL DATE RANGE START'.Y   + 'FFG - CTRL DATE RANGE START'.Height, 0 ),
    If( 'FFG - CTRL DROPDOWN'.Visible,           'FFG - CTRL DROPDOWN'.Y           + 'FFG - CTRL DROPDOWN'.Height,         0 ),
    If( 'FFG - CTRL COMBOBOX'.Visible,           'FFG - CTRL COMBOBOX'.Y           + 'FFG - CTRL COMBOBOX'.Height,         0 ), 
    If( 'FFG - CTRL CHECKBOX'.Visible,           'FFG - CTRL CHECKBOX'.Y           + 'FFG - CTRL CHECKBOX'.Height,         0 ),
    If( 'FFG - ERROR MSG Txt'.Visible,           'FFG - ERROR MSG Txt'.Y           + 'FFG - ERROR MSG Txt'.Height,         0 ),
    If( 'FFG - HEADER Txt'.Visible,              'FFG - HEADER Txt'.Y              + 'FFG - HEADER Txt'.Height,            0 ),
    If( 'FFG - textValue RESULT'.Visible,        'FFG - textValue RESULT'.Y        + 'FFG - textValue RESULT'.Height,      0 ), // Should only be visible if Debug is enabled
    /* Default */ 'FFG - NAME Txt'.Y + 'FFG - NAME Txt'.Height
) + 5

So in the above, my gallery is actually used to collect a user supplied range of filter criteria.  This is done in a custom control (FlexibleFilterGallery), I created, and the above is a snippet from it.  When using the control, it is passed in a table of "filter criteria" that specifies the type of control for the filter, the available values (for comboboxes, list boxes, drop downs), defaults, ranges (ie: start/end dates, numerical ranges, etc) that the control will use to provide the user the correct type of control, as well as limit options / validate user input.  

The template includes all those controls (combos, LBs, checkboxes, text entry, date, date range, etc), but only the one specified by the specific record in the table is set to Visible.

BTW - you'll also notice the check for the 'FFG - ERROR MSG Txt'.Visible.  This is only Visible if there was an error, and actually will increase the size of that cell to display the error message (ie: if for date range, end date is before start date) and once the error is corrected, the error message will then have Visible set to false, and thus the height of the cell will be reduced again automatically.

Thus, the code above with the If()s determine which one is visible, and then get its current Height - which depending on the control could be variable height (especially for text with autoheight set, etc).  

So this grabs the Max position from each of the Visible controls (in some other uses there might be multiple that are visible), adds 5 to this, and sets it to the height of the rectangle.  The flexible gallery control then correctly sizes itself, meaning that each record may be displayed in the gallery with a different height.

A slightly more complex way I use this is in a gallery or items (customer records) where each record may have multiple underlying records that I wish to display in the same template.  While I could do this with nested galleries (a gallery contained in a gallery), instead I'm using an HTML text field (with an HTML table) that is set to autoheight for the sub record.  (while this is not my specific use, consider this like a customer record, where perhaps the customer own multiple vehicles, so the "subrecord" is about the vehicles).  Initially the HTML is hidden, unless the user clicks on the "Show Details" button, which will then cause it to be set to Visible, and thus PowerApps will recalculate the size of that record in the template dynamically - expanding it as necessary.  You can show details of only the records you want which will only resize that one in the gallery accordingly.  Some have only 0, 1, or many subrecords (ie: vehicles in my example) - so the size will differ based on the record itself (number of rows as well as size of that row).  

Here I'm using the separator line approach (no difference in function, just visual appearance) with the HTML text set to autoheight.  So the Y for the separator (which is the bottom most control in the template) is:

If( 'AT - Usage Details Html_1'.Visible, 
    'AT - Usage Details Html_1'.Y + 'AT - Usage Details Html_1'.Height,
     'AT - Usage Details Html_1'.Y
)  + 5 


Works VERY well.  Sorry if the explanation was confusing - was typing this up between morning meetings (have to run for one).  Will see if I can post some screenshots later.

But hopefully the above gives you some ideas.


View solution in original post

6 REPLIES 6
v-monli-msft
Community Support
Community Support

Hi @Anonymous,

 

Thank you for sharing your resolution here and hope that this would benefit anyone who has the similar situation.

 

Regards,

Mona 

Community Support Team _ Mona Li
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Anonymous
Not applicable

Thanks @v-monli-msft.  

BTW - I discovered today that this works differently when run in another "PowerApps Player" app - ie: "Windows Player" (the Windows store app), Android, and iOS vs the "Web Player" app that appears to be used when running from Studio or SharePoint.   

 

It appears that there are text and spacing issues when run across platforms.  I suspect that the way "pixels" are calculated within the HTML text control may vary between platforms.  I've seen similar things happen with text box placement, height etc between platforms, so believe this is related.

 

My workaround (as longer term this will need to work cross platform) will be to manually figure out a "scaling factor" for each player, and have the app apply that when its running (though there is no direct way to figure this out from PowerApps - I had to use an MS Flow that PowerApps calls and parse x-ms-user-agent to determine this from within my app).  If I get this part working in the near future, I'll update the post.  that said, I would suspect that this scaling might change in future versions of PowerApps as (hopefully) Microsoft brings the scaling across the different "players" closer together.  

 

 

PytByt
Post Prodigy
Post Prodigy

@Anonymous could you please add a demo sir? i need this...

thank you

Anonymous
Not applicable

I'll try to post one for you.

Actually, with some of the changes in PowerApps, (there are still some issues with flexible height galleries), I had to change my approach, but what I've settled on seems to consistently work, regardless of the platform it was running on.  

With the other approach (posted above), I later discovered the sizing would be different depending on whether it was run as an app in Chrome/Chromium or Edge, whether it was running the web development environment, or if running on iOS or Android.  

 

I'm now using a rectangle object (either as a separator (height=1, Y=max height) or bounding rectangle (X=0, Y=0, height = max location of other controls) instead of the HTML.  This seems to work much better now.  I think the HTML approach differed between environments perhaps due to different assumptions those browsers/etc made about HTML spacing.  

To use the "bounding rectangle" approach, I set the X and Y of the rectangle to 0, and then for Height do something like the following:

Max( 
    If( 'FFG - CTRL TEXT INPUT'.Visible,         'FFG - CTRL TEXT INPUT'.Y         + 'FFG - CTRL TEXT INPUT'.Height,       0 ),
    If( 'FFG - CTRL DATE'.Visible,               'FFG - CTRL DATE'.Y               + 'FFG - CTRL DATE'.Height,             0 ),
    If( 'FFG - CTRL DATE RANGE START'.Visible,   'FFG - CTRL DATE RANGE START'.Y   + 'FFG - CTRL DATE RANGE START'.Height, 0 ),
    If( 'FFG - CTRL DROPDOWN'.Visible,           'FFG - CTRL DROPDOWN'.Y           + 'FFG - CTRL DROPDOWN'.Height,         0 ),
    If( 'FFG - CTRL COMBOBOX'.Visible,           'FFG - CTRL COMBOBOX'.Y           + 'FFG - CTRL COMBOBOX'.Height,         0 ), 
    If( 'FFG - CTRL CHECKBOX'.Visible,           'FFG - CTRL CHECKBOX'.Y           + 'FFG - CTRL CHECKBOX'.Height,         0 ),
    If( 'FFG - ERROR MSG Txt'.Visible,           'FFG - ERROR MSG Txt'.Y           + 'FFG - ERROR MSG Txt'.Height,         0 ),
    If( 'FFG - HEADER Txt'.Visible,              'FFG - HEADER Txt'.Y              + 'FFG - HEADER Txt'.Height,            0 ),
    If( 'FFG - textValue RESULT'.Visible,        'FFG - textValue RESULT'.Y        + 'FFG - textValue RESULT'.Height,      0 ), // Should only be visible if Debug is enabled
    /* Default */ 'FFG - NAME Txt'.Y + 'FFG - NAME Txt'.Height
) + 5

So in the above, my gallery is actually used to collect a user supplied range of filter criteria.  This is done in a custom control (FlexibleFilterGallery), I created, and the above is a snippet from it.  When using the control, it is passed in a table of "filter criteria" that specifies the type of control for the filter, the available values (for comboboxes, list boxes, drop downs), defaults, ranges (ie: start/end dates, numerical ranges, etc) that the control will use to provide the user the correct type of control, as well as limit options / validate user input.  

The template includes all those controls (combos, LBs, checkboxes, text entry, date, date range, etc), but only the one specified by the specific record in the table is set to Visible.

BTW - you'll also notice the check for the 'FFG - ERROR MSG Txt'.Visible.  This is only Visible if there was an error, and actually will increase the size of that cell to display the error message (ie: if for date range, end date is before start date) and once the error is corrected, the error message will then have Visible set to false, and thus the height of the cell will be reduced again automatically.

Thus, the code above with the If()s determine which one is visible, and then get its current Height - which depending on the control could be variable height (especially for text with autoheight set, etc).  

So this grabs the Max position from each of the Visible controls (in some other uses there might be multiple that are visible), adds 5 to this, and sets it to the height of the rectangle.  The flexible gallery control then correctly sizes itself, meaning that each record may be displayed in the gallery with a different height.

A slightly more complex way I use this is in a gallery or items (customer records) where each record may have multiple underlying records that I wish to display in the same template.  While I could do this with nested galleries (a gallery contained in a gallery), instead I'm using an HTML text field (with an HTML table) that is set to autoheight for the sub record.  (while this is not my specific use, consider this like a customer record, where perhaps the customer own multiple vehicles, so the "subrecord" is about the vehicles).  Initially the HTML is hidden, unless the user clicks on the "Show Details" button, which will then cause it to be set to Visible, and thus PowerApps will recalculate the size of that record in the template dynamically - expanding it as necessary.  You can show details of only the records you want which will only resize that one in the gallery accordingly.  Some have only 0, 1, or many subrecords (ie: vehicles in my example) - so the size will differ based on the record itself (number of rows as well as size of that row).  

Here I'm using the separator line approach (no difference in function, just visual appearance) with the HTML text set to autoheight.  So the Y for the separator (which is the bottom most control in the template) is:

If( 'AT - Usage Details Html_1'.Visible, 
    'AT - Usage Details Html_1'.Y + 'AT - Usage Details Html_1'.Height,
     'AT - Usage Details Html_1'.Y
)  + 5 


Works VERY well.  Sorry if the explanation was confusing - was typing this up between morning meetings (have to run for one).  Will see if I can post some screenshots later.

But hopefully the above gives you some ideas.


jlucarelli
Regular Visitor

Thank you!  That worked like a charm for me.  And now that I know you can embed control properties in the HTML text control, I imagine I'll find other users for that as well.  🙂

anilrambhajan
Helper III
Helper III

Can someone help me. My gallery items are "cutting off" on different screen resolutions when I use the flexible height gallery with the visible property

Helpful resources

Announcements

Take a short Community User Survey | Help us make your experience better!

To ensure that we are providing the best possible experience for Community members, we want to hear from you!    We value your feedback! As part of our commitment to enhancing your experience, we invite you to participate in a brief 15-question survey. Your insights will help us improve our services and better serve the community.   👉 Community User Survey    Thank you for being an essential part of our community!    Power Platform Engagement Team  

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!

Calling all User Group Leaders and Super Users! Mark Your Calendars for the next Community Ambassador Call on May 9th!

This month's Community Ambassador call is on May 9th at 9a & 3p PDT. Please keep an eye out in your private messages and Teams channels for your invitation. There are lots of exciting updates coming to the Community, and we have some exclusive opportunities to share with you! As always, we'll also review regular updates for User Groups, Super Users, and share general information about what's going on in the Community.     Be sure to register & we hope to see all of you there!

April 2024 Community Newsletter

We're pleased to share the April Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzDeenujialexander2523ragavanrajanLaurensMManishSolankiMattJimisonLucas001AmikcapuanodanilostephenrobertOliverRodriguestimlAndrewJManikandanSFubarmmbr1606VishnuReddy1997theMacResolutionsVishalJhaveriVictorIvanidzejsrandhawahagrua33ikExpiscornovusFGuerrero1PowerAddictgulshankhuranaANBExpiscornovusprathyooSpongYeNived_Nambiardeeksha15795apangelesGochixgrantjenkinsvasu24Mfon   LATEST NEWS Business Applications Launch Event - On Demand In case you missed the Business Applications Launch Event, you can now catch up on all the announcements and watch the entire event on-demand inside Charles Lamanna's latest cloud blog.   This is your one stop shop for all the latest Copilot features across Power Platform and #Dynamics365, including first-hand looks at how companies such as Lenovo, Sonepar, Ford Motor Company, Omnicom and more are using these new capabilities in transformative ways. Click the image below to watch today!     Power Platform Community Conference 2024 is here! It's time to look forward to the next installment of the Power Platform Community Conference, which takes place this year on 18-20th September 2024 at the MGM Grand in Las Vegas!   Come and be inspired by Microsoft senior thought leaders and the engineers behind the #PowerPlatform, with Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab and Leon Welicki already confirmed to speak. You'll also be able to learn from industry experts and Microsoft MVPs who are dedicated to bridging the gap between humanity and technology. These include the likes of Lisa Crosbie, Victor Dantas, Kristine Kolodziejski, David Yack, Daniel Christian, Miguel Félix, and Mats Necker, with many more to be announced over the coming weeks.   Click here to watch our brand-new sizzle reel for #PPCC24 or click the image below to find out more about registration. See you in Vegas!     Power Up Program Announces New Video-Based Learning Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram. These include a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the image below to find out more!     UPCOMING EVENTS Microsoft Build - Seattle and Online - 21-23rd May 2024 Taking place on 21-23rd May 2024 both online and in Seattle, this is the perfect event to learn more about low code development, creating copilots, cloud platforms, and so much more to help you unleash the power of AI.   There's a serious wealth of talent speaking across the three days, including the likes of Satya Nadella, Amanda K. Silver, Scott Guthrie, Sarah Bird, Charles Lamanna, Miti J., Kevin Scott, Asha Sharma, Rajesh Jha, Arun Ulag, Clay Wesener, and many more.   And don't worry if you can't make it to Seattle, the event will be online and totally free to join. Click the image below to register for #MSBuild today!     European Collab Summit - Germany - 14-16th May 2024 The clock is counting down to the amazing European Collaboration Summit, which takes place in Germany May 14-16, 2024. #CollabSummit2024 is designed to provide cutting-edge insights and best practices into Power Platform, Microsoft 365, Teams, Viva, and so much more. There's a whole host of experts speakers across the three-day event, including the likes of Vesa Juvonen, Laurie Pottmeyer, Dan Holme, Mark Kashman, Dona Sarkar, Gavin Barron, Emily Mancini, Martina Grom, Ahmad Najjar, Liz Sundet, Nikki Chapple, Sara Fennah, Seb Matthews, Tobias Martin, Zoe Wilson, Fabian Williams, and many more.   Click the image below to find out more about #ECS2024 and register today!   Microsoft 365 & Power Platform Conference - Seattle - 3-7th June If you're looking to turbo boost your Power Platform skills this year, why not take a look at everything TechCon365 has to offer at the Seattle Convention Center on June 3-7, 2024.   This amazing 3-day conference (with 2 optional days of workshops) offers over 130 sessions across multiple tracks, alongside 25 workshops presented by Power Platform, Microsoft 365, Microsoft Teams, Viva, Azure, Copilot and AI experts. There's a great array of speakers, including the likes of Nirav Shah, Naomi Moneypenny, Jason Himmelstein, Heather Cook, Karuana Gatimu, Mark Kashman, Michelle Gilbert, Taiki Y., Kristi K., Nate Chamberlain, Julie Koesmarno, Daniel Glenn, Sarah Haase, Marc Windle, Amit Vasu, Joanne C Klein, Agnes Molnar, and many more.   Click the image below for more #Techcon365 intel and register today!   For more events, click the image below to visit the Microsoft Community Days website.    

Tuesday Tip | Update Your Community Profile Today!

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   We're excited to announce that updating your community profile has never been easier! Keeping your profile up to date is essential for staying connected and engaged with the community.   Check out the following Support Articles with these topics: Accessing Your Community ProfileRetrieving Your Profile URLUpdating Your Community Profile Time ZoneChanging Your Community Profile Picture (Avatar)Setting Your Date Display Preferences Click on your community link for more information: Power Apps, Power Automate, Power Pages, Copilot Studio   Thank you for being an active part of our community. Your contributions make a difference! Best Regards, The Community Management Team

Top Solution Authors
Top Kudoed Authors
Users online (3,417)