cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
shanemeisner
Helper V
Helper V

Help with Multiple Conditional checks for Visible Setting

I have the following Formula working to hide a message, or show a message, if the conditions are met:

If(!IsBlank(Statusval.Text),false, ReqType.Selected.Value = "Vendor Add", false, ReqType.Selected.Value = "-", false, ReqType.Selected.Value = "Block Vendor", false, ReqType.Selected.Value = "Vendor Change"  && IsBlank(varVendorInfo) Or IsBlank(varVendorPay) Or IsBlank(varVendorw89) ,true, ReqType.Selected.Value = "Unblock Vendor" && IsBlank(varVendorInfo) Or IsBlank(varVendorPay) Or IsBlank(varVendorw89) ,true, false)

This show the message if the 3 Variables are blank and the Type selected is Change or Unblock.

I now am trying to add an additional check of a 2nd field and when doing so it "Loses its mind" on when to show or hide..
looking to change this: ReqType.Selected.Value = "Vendor Change" && IsBlank(varVendorInfo) Or IsBlank(varVendorPay) Or IsBlank(varVendorw89) ,true
to check a 2nd field:
ReqType.Selected.Value = "Vendor Change" && TypeVendor.Selected.value = "Purchase Order" &&  IsBlank(varVendorInfo) Or IsBlank(varVendorPay) Or IsBlank(varVendorw89) ,true

But doing a check of a 2nd field breaks the "Or" statement and the message doesn't continue to show when it should.

1 ACCEPTED SOLUTION

Accepted Solutions

Since I couldn't figure out a way to do it all in one.. I created two separate Labels.. where they hide based on the Type of Vendor Selected:

If(TypeVendor.Selected.Value = "Non-Purchase Order Vendor", false, !IsBlank(Statusval.Text), false, ReqType.Selected.Value = "Vendor Add", false, ReqType.Selected.Value = "-", false, ReqType.Selected.Value = "Block Vendor", false, ReqType.Selected.Value = "Vendor Change" && IsBlank(varVendorInfo) Or IsBlank(varVendorPay) Or IsBlank(varVendorw89) ,true, ReqType.Selected.Value = "Unblock Vendor" && IsBlank(varVendorInfo) Or IsBlank(varVendorPay) Or IsBlank(varVendorw89) ,true, false)

and the other one is: TypeVendor.Selected.Value = "Purchase Order Vendor", false,

 and it works as I need it..

View solution in original post

5 REPLIES 5
mdevaney
Super User III
Super User III

@shanemeisner 

Would throwing some brackets around the AND logic help?  Suggest you start by doing this and then experiment with placement of the brackets.

 

(ReqType.Selected.Value = "Vendor Change" && TypeVendor.Selected.value = "Purchase Order" &&  IsBlank(varVendorInfo)) Or IsBlank(varVendorPay) Or IsBlank(varVendorw89) ,true

 

---
Please click "Accept as Solution" if my post answered your question so that others may find it more quickly. If you found this post helpful consider giving it a "Thumbs Up."

Thanks @mdevaney .. Tried placing brackets in a couple different places with no change.
1st attempt:
(ReqType.Selected.Value = "Vendor Change" && TypeVendor.Selected.Value = "Purchase Order Vendor" && IsBlank(varVendorInfo) Or IsBlank(varVendorPay) Or IsBlank(varVendorw89) ,true,
Then tried:

(ReqType.Selected.Value = "Vendor Change" && TypeVendor.Selected.Value = "Purchase Order Vendor" && IsBlank(varVendorInfo) ) Or IsBlank(varVendorPay) Or IsBlank(varVendorw89) ,true,

and lastly tried:

(ReqType.Selected.Value = "Vendor Change" && TypeVendor.Selected.Value = "Purchase Order Vendor" && IsBlank(varVendorInfo)  Or IsBlank(varVendorPay) Or IsBlank(varVendorw89)) ,true,

All ended up still showing the Message even though "TypeVendor" was not "Purchase Order Vendor" as shown below:

vendorchange.png

@shanemeisner 

It is likely showing because one of these OR conditions are true.

Or IsBlank(varVendorPay) Or IsBlank(varVendorw89)

 ---
Please click "Accept as Solution" if my post answered your question so that others may find it more quickly. If you found this post helpful consider giving it a "Thumbs Up."

Correct @mdevaney , they are.. But when it comes to a "Non-Purchase Order Vendor", the 

IsBlank(varVendorPay)

 Will always be blank.. So I need the message to be visible if the Vendor type is "Purchase Order" and the 3 Variables are blank.. 

But, if Vendor type is "Non-Purchase Order", then I will only want to check 2 of the 3 variables( haven't even started to add that yet).
At this point I can't get it to check both the Request Type and the Vendor type + the 3 Or Statements.
In the case of my screen shot, for this test, the message should be hidden as the Vendor type is Non-purchase order.. 
I did find that if I reduce my Variable check down to just two of them like this

 ReqType.Selected.Value = "Vendor Change" && TypeVendor.Selected.Value = "Purchase Order Vendor"  && IsBlank(varVendorInfo) Or IsBlank(varVendorPay),true
It worked.. it's adding the next "Or" that breaks the logic.

Since I couldn't figure out a way to do it all in one.. I created two separate Labels.. where they hide based on the Type of Vendor Selected:

If(TypeVendor.Selected.Value = "Non-Purchase Order Vendor", false, !IsBlank(Statusval.Text), false, ReqType.Selected.Value = "Vendor Add", false, ReqType.Selected.Value = "-", false, ReqType.Selected.Value = "Block Vendor", false, ReqType.Selected.Value = "Vendor Change" && IsBlank(varVendorInfo) Or IsBlank(varVendorPay) Or IsBlank(varVendorw89) ,true, ReqType.Selected.Value = "Unblock Vendor" && IsBlank(varVendorInfo) Or IsBlank(varVendorPay) Or IsBlank(varVendorw89) ,true, false)

and the other one is: TypeVendor.Selected.Value = "Purchase Order Vendor", false,

 and it works as I need it..

View solution in original post

Helpful resources

Announcements
PA User Group

Welcome to the User Group Public Preview

Check out new user group experience and if you are a leader please create your group

secondImage

Demo Extravaganza is Back!

We are excited to announce that Demo Extravaganza for 2021 has started!

MBAS on Demand

Microsoft Business Applications Summit sessions

On-demand access to all the great content presented by the product teams and community members! #MSBizAppsSummit #CommunityRocks

Power Apps June 2021

June Power Apps Community Call

Don't miss the call this month on June 16th - 8a PDT

Top Solution Authors
Top Kudoed Authors
Users online (26,712)