cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Help with a Gallery filtering

I have 2 galleries called "New" & "Closed"

The New gallery I am filtering by certain codes X & Y by a ClearCollect called ccTest

Items: Filter(ccTest, Code="X" || Code="Y")

 

The Closed Gallery I am filtering by Radio1 button. Yes

Items: Filter(ccTest, Radio1="Yes")

 

In the New gallery if I change the code to another code value and select Yes on the radio1, the case will move over to the Closed gallery. 

 

Sometimes, the code in the New gallery needs to stay the same (x or y) but the radio1 button still gets selected Yes but stays in the New gallery.

My question:

How do I move this code that is a 'X' value, and the radio button gets selected Yes and move into the Closed gallery?

Thank you

1 ACCEPTED SOLUTION

Accepted Solutions
Anonymous
Not applicable

@LaurensM 
yes, when I tried the above:

Filter(ccTest, RadioField <> "Yes" && (Code="X" || Code="Y"))

It still keeps the X and Y codes in the New gallery even though it shows these records as being closed in the Closed gallery. 
I know this doesn't make any sense. It's just a simple filtering between the 2 galleries. I honestly don't get it

View solution in original post

7 REPLIES 7

@Anonymous try the following code for the New Gallery:

 

Items: Filter(ccTest, (Code="X" && Radio1 <> "Yes") || Code="Y")

If it also can occur for Y try:

Items: Filter(ccTest, Radio1 <> "Yes" && (Code="X" || Code="Y"))

 

I hope this helped!

Anonymous
Not applicable

Hi @LaurensM 

Thank you for responding. The information didn't help. 

 

In the New Gallery working a record. If I leave the Code to either X or Y and then select Yes (Radio1), it will go to the Closed Gallery and also stay in the New gallery because of the filtering of X or Y. 

@Anonymous does the Radio button update the record in the collection when selecting "Yes"?

If so, you should use this field to filter the New Gallery instead of referencing a radio control:

New Gallery Items property:

Items: Filter(ccTest, RadioField <> "Yes" && (Code="X" || Code="Y"))

OnChange of RadioButton:

Patch(ccTest, ThisItem, {RadioField: Self.Selected.Value})

 

I hope this helps!

Anonymous
Not applicable

Hi @LaurensM 
Since the New gallery filter is setup to show all Code="X" || Code="Y", it keeps these codes in the New gallery after updating record row as I leave the Code as X or Y. Even though if you look in the Closed Gallery, it shows the record updated there. I won't remove record from the New gallery because its filtering for X or Y code. Would you know how to remove the record from the New gallery after updating it?

 

@Anonymous does this also occur when you extend the filtering with:

Filter(ccTest, RadioField <> "Yes" && (Code="X" || Code="Y"))

The gallery will only show records that do not have a "Yes" RadioField and code X or Y.

Once updating the record to 'Yes', it should disappear from the first gallery due to the filter above.

Anonymous
Not applicable

@LaurensM 
yes, when I tried the above:

Filter(ccTest, RadioField <> "Yes" && (Code="X" || Code="Y"))

It still keeps the X and Y codes in the New gallery even though it shows these records as being closed in the Closed gallery. 
I know this doesn't make any sense. It's just a simple filtering between the 2 galleries. I honestly don't get it

Anonymous
Not applicable

Hi @LaurensM 

Its working now. I got your suggestion above to work. Thank you so much! Thank you for all your help

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Summer of Solutions | Week 3 Results | Win free tickets to the Power Platform Conference

We are excited to announce the Summer of Solutions Challenge!   This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions in the Forums to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersNumber of SolutionsSuper UsersNumber of Solutions @anandm08  23 @WarrenBelz  31 @DBO_DV  10 @Amik  19 AmínAA 6 @mmbr1606  12 @rzuber  4 @happyume  7 @Giraldoj  3@ANB 6 (tie)   @SpongYe  6 (tie)     Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersSolutionsSuper UsersSolutions @anandm08  10@WarrenBelz 25 @DBO_DV  6@mmbr1606 14 @AmínAA 4 @Amik  12 @royg  3 @ANB  10 @AllanDeCastro  2 @SunilPashikanti  5 @Michaelfp  2 @FLMike  5 @eduardo_izzo  2   Meekou 2   @rzuber  2   @Velegandla  2     @PowerPlatform-P  2   @Micaiah  2     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Week 3:Community MembersSolutionsSuper UsersSolutionsPower Apps anandm0861WarrenBelz86DBO_DV25Amik66Michaelfp13mmbr160647Giraldoj13FLMike31AmínAA13SpongYe27  

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Top Solution Authors
Top Kudoed Authors
Users online (4,595)