cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
RoB-E
Helper II
Helper II

How to code last submit in a dropdown?

I'm new to power apps and just trying to code a drop down to return last submittedvalue on newform  not sure how to and help would be much appreciated. The app I'm working on will create 20 to 30 records a day with the same block number. So I need the dropdown value to defualt to last selected value  when submitted on new form 

18 REPLIES 18

What I am looking for is to save the selected value say 205 for example in tye dropdown newform. So tye submitted form would be 205 and the new form would start with the 205 selection already selected in the dropdown. Is there A code that can do  that ?  

poweractivate
Most Valuable Professional
Most Valuable Professional

@RoB-E 

 

Yes try like this.

 

Presuming a Form called Form1 and a button called Button1 and a data source called List01 (such as a SharePoint List, for example):

 

Form1 DefaultMode

 

FormMode.New

 

 

Form1 Item

 

If(!IsBlank(First(Coll_Last_Submit)),First(Coll_Last_Submit),Defaults(List01))
//Instead of List01 above, use the name of your SharePoint List or data source.

 

 

Form1 OnSuccess

 

Clear(Coll_Last_Submit);Collect(Coll_Last_Submit,Form1.LastSubmit);Patch(Coll_Last_Submit,First(Coll_Last_Submit),{ID:Blank()})

 

or

 

ClearCollect(Coll_Last_Submit,Form1.LastSubmit);Patch(Coll_Last_Submit,First(Coll_Last_Submit),{ID:Blank()})

 

 

Button1 OnSelect

 

SubmitForm(Form1);

 

 

This should work, and the New form after submit, will have all the previous values based on the last submitted record, but still be a new form mode. After the next submit, it should create a brand new record.

 

If the above does not work, properly i.e. for example, if for some reason it just keeps editing the same last submitted record over and over again, it could be because the part where Patch of Blank() value for ID, might not work and not actually remove the ID (thus editing the same last submitted record over and over again), unless a specific setting is turned on in the app called Formula-level error management . So if it does not work, try these steps as well below first:

 

1. Click on Settings

poweractivate_0-1663814617897.png

 

2. In the modal, click on Upcoming Features -> Preview ->  Formula-level error management - set this toggle, to "On"

poweractivate_1-1663814663230.png

3. Close this modal.

4. Save and Publish the app.

5. Close the whole Power Apps editor.

6. Go to make.powerapps.com, select the right environment, find your app for editing, and open it up for editing. If you just made this app recently and it's missing from the list for some reason, just try making a new blank app, and the one that is missing might now appear in the list.

7. Try the app now and see if it works.

 

This setting has been around for quite a long time, it is often turned on for this kind of scenario, the fact that it is labeled "Preview" may not be so much of a concern, I doubt the feature is going away in the future. While that is technically subject to change, I am not able to think of a better way to accomplish your scenario. First try and see if it works with the Formula-level error management setting off (the default). If it does, then great. If it does not (and I suspect that it might not), this setting Formula-level error management  may have to be set to On for this solution to work properly. Please note that after turning it on, it may be necessary to close and reopen the app for editing as stated in the above steps, if it is still not making a new record on each submit, so that the setting could fully take effect.

 

See if it helps @RoB-E 

I did tye steps and also turned on tye function in settings. I'm getting this error ? I have also tried added the ID data card to my app but it still says same error.

I did fix the form name after sending the last message to EditForm1 in the code. I still recive same error message?

poweractivate
Most Valuable Professional
Most Valuable Professional

@RoB-E 

 

The names of the form and the name of the column is for example only.

 

Maybe you are not using a SharePoint list. Instead of ID, put whatever is the column or field that uniquely identifies each row over there.

 

Even if you  are using a SharePoint List, the ID column may have been renamed for some reason in your List, or it is a custom unique column, and may have some other name. than "ID". Check if this might be the case for you, and use this as the name of the column instead of "ID".

 

If you are sure that you do not have any column or field that uniquely identifies each row in this data source, you may be able to remove the Patch part altogether, and it might just work like that anyway. However, in most cases, there is a column that contains the Primary Key, or in other words, the field that has a unique value, which uniquely identifies the row for that "table". If this unique field value is left in there and not blanked out, even if the form is on New, then it will either edit the same record over and over again on the next submit, or throw an error from the data source side on the next submit that the unique value already exists, and then just refuse to create the record altogether and just show that kind of error of the record with that unique value already existing.

 

If you are sure you have no Primary Key, you could try removing the Patch portion. However, I recommend you leave it there, figure out what is the Primary Key column, and use that as the name of the column instead of "ID".

 

See if it helps @RoB-E 

Thank you this did work. i first tried it on a new form page and it worked. I then went back to my app and realized I needed to remove Reset(Form) & EditForm1(NewForm) from my Onselect. its working fine now thanks again. I do have one more Question. for all the other Fields I want Blank after Submit I changed  the Default To "" is that ok? it seems to work just not sure if I should be doing it another way 

poweractivate
Most Valuable Professional
Most Valuable Professional

@RoB-E 

 

You can try to use Blank() for Default instead of "" to be more accurate - especially since you may already be using Blank() now in the Patch statement I gave to make the ID field blank in the new record after submit.

 

 It may be required to have Formula-level error management turned on as I mentioned before, to use Blank() values (especially to patch out the ID to a Blank value).

 

If it is working better or more consistently for you with "", or if you just prefer it, then using "" for Default may be acceptable as well. I recommend to use Blank() but if you prefer it, you may use "" instead, but make sure to carefully test it, some cases may require Blank() to be there and not "" to signify a blank value for a field.

Ok now that all of that is working I noticed I have duplicates showing up in my share point list is there  away to stop that ?

poweractivate
Most Valuable Professional
Most Valuable Professional

@RoB-E 

If the button is pressed again and again, it will create new records with the same values, this is by design of what you requested. They definitely should be different records though with a different unique ID if you check the SharePoint List.

If you want one or more fields to always be different, try using a function like Rand(). You could also try accessing the LastSubmit directly after the OnSuccess, getting the unique ID, and Patching it to another field - although I am unsure why that would be a good idea - the unique value is already there generated automatically, it may be better to simply edit the SharePoint List view, reveal the unique ID, and notice they really aren't "duplicates".

 

Whatever makes it look like a "duplicate", you could perhaps blank out more fields such as specific fields that should not be pre-filled for instance.

Change

ClearCollect(Coll_Last_Submit,Form1.LastSubmit);Patch(Coll_Last_Submit,First(Coll_Last_Submit),{ID:Blank()})

to

//pseudocode
ClearCollect(Coll_Last_Submit,Form1.LastSubmit);Patch(Coll_Last_Submit,First(Coll_Last_Submit),{ID:Blank(),SomeOtherFieldToBlankOut:Blank(),YetAnotherFieldToBlankOut:Blank()})
//change "SomeOtherFieldToBlankOut" and "YetAnotherFieldToBlankOut" to what makes sense for you for what you want to not use the last submitted value, but be blank instead, and have how many or how few of those you want.

 

You can test by using Rand() which should make it pretty obvious they're not duplicates, then try instead to do whatever makes more sense for the field(s) instead.

 

In case there may still be some issue, could you clarify what you mean by noticing that you have duplicates?

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

  It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd. at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3rd, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!       Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪🌠

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

March User Group Update: New Groups and Upcoming Events!

  Welcome to this month’s celebration of our Community User Groups and exciting User Group events. We’re thrilled to introduce some brand-new user groups that have recently joined our vibrant community. Plus, we’ve got a lineup of engaging events you won’t want to miss. Let’s jump right in: New User Groups   Sacramento Power Platform GroupANZ Power Platform COE User GroupPower Platform MongoliaPower Platform User Group OmanPower Platform User Group Delta StateMid Michigan Power Platform Upcoming Events  DUG4MFG - Quarterly Meetup - Microsoft Demand PlanningDate: 19 Mar 2024 | 10:30 AM to 12:30 PM Central America Standard TimeDescription: Dive into the world of manufacturing with a focus on Demand Planning. Learn from industry experts and share your insights. Dynamics User Group HoustonDate: 07 Mar 2024 | 11:00 AM to 01:00 PM Central America Standard TimeDescription: Houston, get ready for an immersive session on Dynamics 365 and the Power Platform. Connect with fellow professionals and expand your knowledge. Reading Dynamics 365 & Power Platform User Group (Q1)Date: 05 Mar 2024 | 06:00 PM to 09:00 PM GMT Standard TimeDescription: Join our virtual meetup for insightful discussions, demos, and community updates. Let’s kick off Q1 with a bang! Leaders, Create Your Events!    Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you!

Top Solution Authors
Top Kudoed Authors
Users online (4,764)