cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
tianaranjo
Continued Contributor
Continued Contributor

Label Position - Y Axis

Greetings,

 

I would like to position labels using the following:

Y =

If(
"1" in colThisItem.ID && " Project ID #" in colThisItem.Result, lblPos1.Y + lblPos1.Height / 2 - lblSalesforce.Height /2,

"2" in colThisItem.ID && " Project ID #" in colThisItem.Result, lblPos2.Y + lblPos2.Height / 2 - lblSalesforce.Height /2

)

 

This does as intended if I only have one statement, for example if Project ID is the 2nd item in my collection and I ONLY have this:

If(

"2" in colThisItem.ID && " Project ID #" in colThisItem.Result, lblPos2.Y + lblPos2.Height / 2 - lblSalesforce.Height /2

)

 

lblProjectID 'lands' in on the relative Y acces, or position2.  However, once I add the first formula,

 

If(
"1" in colThisItem.ID && " Project ID #" in colThisItem.Result, lblPos1.Y + lblPos1.Height / 2 - lblSalesforce.Height /2,

"2" in colThisItem.ID && " Project ID #" in colThisItem.Result, lblPos2.Y + lblPos2.Height / 2 - lblSalesforce.Height /2

)

 

then the label is placed in Position1.

 

Any suggestions?  Thanks; in advance!

@dinusc (Hoping you'll be intrigued by this ? also)

1 ACCEPTED SOLUTION

Accepted Solutions
KroonOfficeSol
Resident Rockstar
Resident Rockstar

Oke, what I think tianaranjo is tryïng to achieve is to make some groups (with label, textinput and other field) visible property reliable on the seleteditems off the combobox and get a solution like this

Sol1.PNGSol2.PNG

 

This we can achieve by creating a sequence off relativ positioning off the controls. 

 

First the collection is not needed, you can set the visibility off the group labels by a simpel formula on the visible parameter ike:

Group1.Text in ComboBox1.SelectedItems.Value1

In this case I presume the text off the control is the same as in the combobox list. This line will check the value to exist in the selecteditems off the control and if so makes the control visible.

 

Then you want to make the group labels Y position relativ to the other visible group label. The formula to do this for the fourth group label will be like:

omboBox1.Y + ComboBox1.Height +
If(Group1.Visible, Group1.Height) +
If(Group2.Visible, Group2.Height) + 
If(Group3.Visible, Group3.Height)

For the third you take the last line off and for a fifth you add a extra line and so on.

 

Then for the Label/Gallery/Table or whatever other control you do basically the same logic. Formula would be like:

ComboBox1.Y + ComboBox1.Height +
If(Group1.Visible, Group1.Height) +
If(Group2.Visible, Group2.Height) +
If(Group3.Visible, Group3.Height) +
If(Group4.Visible, Group4.Height)

So no need to collect the combobox to a collection or use complicated formula, just simple logic.

 

By the way, you can do the same with the X property.

 

Made a videoseries on youtube on re-using screens in PowerApps. In this video I explain in great detail how to use this logic. Including the use off global and local variables, passing local variables from screen-to-screen and resetting this variables to default on the OnHidden property off the screen to get a smooter user experiance. Follow this link to watch PowerApps- Re-Use Screens

 

Interessed if this is what you were looking for as a solutions @tianaranjo

 

Greatings

 

Paul Kroon

View solution in original post

10 REPLIES 10
tianaranjo
Continued Contributor
Continued Contributor

Hoping to raise this one again - I have tried Switch, Or, And without any luck. @mrdang - would you happen to have any ideas?

 

Thank you!

KroonOfficeSol
Resident Rockstar
Resident Rockstar

 He tianaranjo,

 

From your explanation I can't determine were you're problem lies, it's just to vague. First try to put the code you want to share in a code block and format it, for people to read it more easily. Like:

If("1" in colThisItem.ID && " Project ID #" in colThisItem.Result, 
	lblPos1.Y + (lblPos1.Height/2) - (lblSalesforce.Height/2),
	
	"2" in colThisItem.ID && " Project ID #" in colThisItem.Result, 
	lblPos2.Y + (lblPos2.Height/2) - (lblSalesforce.Height/2)
)

Now I see that the " Project ID #" is the same in both lines, is this also in reality? If so this line does nothing, because it's true in both cases and you can leave it off. It could be that this part is false in both lines, which would result in the Y position is not set and this could be the problem you're experiencing. So you should then add a extra line with a default Y position, which is the default when theres no match.

 

Second I notice that you want a condition met on a text in a ID, but isn't the ID an Integer in your case? In that case you should check for a full match like:

 

ColThisItem.ID = 1

Maybe you should add two labels (temporary for testing), break up your condition and add the two parts to a label. Then you will probably see that the first (and second) condition off the first line will be true in all cases, simple because the formula is not correct.  

 

When you not succeed maybe you can post a screenshot off your app so we can see how it should look, one for when first condition is met and one for second condition is met.

 

Btw I presuming that this is a gallery you're using and that the label you want to position is part off the datacard?

 

Hard to understand this explanation. Question, are you tryïng to manipulate the columns showed in the Gallery? by a the combobox?

I sent an email with images hoping it would help clear up.  I am not using a gallery at all, everything is being placed on a screen , again, no gallery. 

 

When I tried using a gallery I was able to acheiv the positioning I wanted, as intended, but that caused other issues so I decided to eliminate the gallery all together.  

 

So you then have a label for every selected, correct? And just want to show the labels selected.

 

What were the issues with the Gallery you experienced?

KroonOfficeSol
Resident Rockstar
Resident Rockstar

Oke, what I think tianaranjo is tryïng to achieve is to make some groups (with label, textinput and other field) visible property reliable on the seleteditems off the combobox and get a solution like this

Sol1.PNGSol2.PNG

 

This we can achieve by creating a sequence off relativ positioning off the controls. 

 

First the collection is not needed, you can set the visibility off the group labels by a simpel formula on the visible parameter ike:

Group1.Text in ComboBox1.SelectedItems.Value1

In this case I presume the text off the control is the same as in the combobox list. This line will check the value to exist in the selecteditems off the control and if so makes the control visible.

 

Then you want to make the group labels Y position relativ to the other visible group label. The formula to do this for the fourth group label will be like:

omboBox1.Y + ComboBox1.Height +
If(Group1.Visible, Group1.Height) +
If(Group2.Visible, Group2.Height) + 
If(Group3.Visible, Group3.Height)

For the third you take the last line off and for a fifth you add a extra line and so on.

 

Then for the Label/Gallery/Table or whatever other control you do basically the same logic. Formula would be like:

ComboBox1.Y + ComboBox1.Height +
If(Group1.Visible, Group1.Height) +
If(Group2.Visible, Group2.Height) +
If(Group3.Visible, Group3.Height) +
If(Group4.Visible, Group4.Height)

So no need to collect the combobox to a collection or use complicated formula, just simple logic.

 

By the way, you can do the same with the X property.

 

Made a videoseries on youtube on re-using screens in PowerApps. In this video I explain in great detail how to use this logic. Including the use off global and local variables, passing local variables from screen-to-screen and resetting this variables to default on the OnHidden property off the screen to get a smooter user experiance. Follow this link to watch PowerApps- Re-Use Screens

 

Interessed if this is what you were looking for as a solutions @tianaranjo

 

Greatings

 

Paul Kroon

Small adition. I could be helpfull to see the columns you can use from the combobox. You can simple do the next formula to store all the selecteditems in a collection:

ClearCollect(MyCollection, ComboBox1.SelectedItems)

Put this on the OnSelect Property off the combobox.

@KroonOfficeSol - Works like a charm!  Thank you for all the time and effort you put with helping on this one.

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

  It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd. at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3rd, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!       Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪🌠

Tuesday Tips: Community Ranks and YOU

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!This Week: Community Ranks--Moving from "Member" to "Community Champion"   Have you ever wondered how your fellow community members ascend the ranks within our community? What sets apart an Advocate from a Helper, or a Solution Sage from a Community Champion? In today’s #TuesdayTip, we’re unveiling the secrets and sharing tips to help YOU elevate your ranking—and why it matters to our vibrant communities. Community ranks serve as a window into a member’s role and activity. They celebrate your accomplishments and reveal whether someone has been actively contributing and assisting others. For instance, a Super User is someone who has been exceptionally helpful and engaged. Some ranks even come with special permissions, especially those related to community management. As you actively participate—whether by creating new topics, providing solutions, or earning kudos—your rank can climb. Each time you achieve a new rank, you’ll receive an email notification. Look out for the icon and rank name displayed next to your username—it’s a badge of honor! Fun fact: Your Community Engagement Team keeps an eye on these ranks, recognizing the most passionate and active community members. So shine brightly with valuable content, and you might just earn well-deserved recognition! Where can you see someone’s rank? When viewing a post, you’ll find a member’s rank to the left of their name.Click on a username to explore their profile, where their rank is prominently displayed. What about the ranks themselves? New members start as New Members, progressing to Regular Visitors, and then Frequent Visitors.Beyond that, we have a categorized system: Kudo Ranks: Earned through kudos (teal icons).Post Ranks: Based on your posts (purple icons).Solution Ranks: Reflecting your solutions (green icons).Combo Ranks: These orange icons combine kudos, solutions, and posts. The top ranks have unique names, making your journey even more exciting! So dive in, collect those kudos, share solutions, and let’s see how high you can rank! 🌟 🚀   Check out the Using the Community boards in each of the communities for more helpful information!  Power Apps, Power Automate, Copilot Studio & Power Pages

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

Top Solution Authors
Top Kudoed Authors
Users online (6,878)