cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Lookup value from sharepoint and register the finish time

Hi,

 

I am trying to complete an app to register the downtime registry.

 

the app intention is to work in this way. when the operator experience a downtime, they will register the start of downtime by choosing their name,machine,downtime reason and patch button, it will make a registry in sharepoint list, and when the downtime finish, operator will once again press the patch and it will lookup by operator name, machine & start time value and then register the finish time on that particular registry.

 

at the moment i am using these code

Set(varItem, LookUp(Downtime, Operator = Operator_dropdown_1.SelectedText.Value && Machine= Machine_dropdown_1.SelectedText.Value && Reason.Value= Reason_dropdown.SelectedText.Value ));
If(
    IsBlank(varItem)||(!IsBlank(varItem.Start)&&!IsBlank(varItem.Finish)), 
    Patch(                           
         Downtime,
         Defaults(Downtime),
         {
          Operator:Operator_dropdown_1.SelectedText.Value,
          Start:Now(),
          Machine:Machine_dropdown_1.SelectedText.Value,
          Reason:Reason_dropdown.SelectedText
         }
   ),
   Patch(
         Downtime,
         varItem,
         {
          Finish: Now()
         }
   )
)

 

the problem experienced now is that app is working good for the 1st registry of a downtime reported by an operator from a machine, when the same downtime registered by the same operator from same machine later on the day, it is creating a new registry as required, but it is not looking up and registering the finish time for the new registry of same downtime registry from same operator from same machine, instead it is creating again a new registry with start time.

 

any help is highly appreciated.

 

Thanks in advance.

Capture.JPG

 

 

17 REPLIES 17
Anonymous
Not applicable

Hi @RandyHayes ,

 

Thanks for help.

 

I tried the new formula, there is a new issue. We are near.

 

the formula is not looking up the registry and entering the finish time for the ID 80, but instead creating a new registry as ID 81 & updating it as finish time.

Capture8.JPG

Anonymous
Not applicable

Hi @RandyHayes 

 

like this, and when downtime registered for the next time it creates a new registry

Capture8.JPG

@Anonymous 

Duh...my bad!  I believe I had a not where a not was not supposed to be 😉

Here...this formula:

With({dataItem: LookUp(Downtime, Operator = Operator_dropdown_1.Selected.Value && Machine= Machine_dropdown_1.Selected.Value && Reason.Value= Reason_dropdown.Selected.Value)},

    Patch(Downtime,
        If(IsBlank(dataItem.Finish) && dataItem.ID>0, dataItem, Defaults(Downtime)),
        Patch(
            {
            Operator:Operator_dropdown_1.Selected.Value,
            Machine:Machine_dropdown_1.Selected.Value,
            Reason:Reason_dropdown.Selected.Value
            },
            If(dataItem.ID>0, {Finish:Now()}, {Start:Now()})
        )
    )
)    
_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!
Anonymous
Not applicable

Hi @RandyHayes 

 

Thanks for help.

 

I tried. but still some issue

 

when a new registry is made it is starting the registry with Finish time instead of start time & then lookup & update the finish time.

Capture9.JPG

@Anonymous 

Okay...I needed to look over the logic more.  Yes, I realized that your logic for getting the initial record from your list is where the issue comes in.  Your Lookup is not distinguishing the right record.  In other words, your lookup will find the first record that matches the criteria....that will (after you have a complete start and finish record) be the exact same record...so the logic would then always think it needs to do a new record.

 

Change your formula to this:

 

With({dataItem:   // Your Record
    LookUp(SortByColumns(Downtime, "Start", Descending), 
        Operator = Operator_dropdown_1.Selected.Value && 
        Machine= Machine_dropdown_1.Selected.Value && 
        Reason.Value= Reason_dropdown.Selected.Value
    )},
    With({newTrue:   // Your criteria for a new record
        (IsBlank(dataItem.Start) && IsBlank(dataItem.Finish)) || 
        (!IsBlank(dataItem.Start) && !IsBlank(dataItem.Finish))
    },

        // Your Patch to the DataSource
        Patch(Downtime,
            If(newTrue, Defaults(Downtime), dataItem),
            Patch(
                {
                Operator:Operator_dropdown_1.Selected.Value,
                Machine:Machine_dropdown_1.Selected.Value,
                Reason:Reason_dropdown.Selected.Value
                },
                If(newTrue, {Start:Now()}, {Finish:Now()})
            )
        )
    ) 
)

 

 

Note, the new change is that the Lookup will find the first record based on the sorted list of Start times.  That should give you the most recent record.

 

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!
Anonymous
Not applicable

Hi @RandyHayes ,

 

Many thanks for your help. the formula workes cool.

 

one final question. is it possible to display the captured start & finish time when pressing patch button? 

example when pressed 1st time it shows the start time, when pressed the 2nd time it shows the finish time, and when a new registry is made it reset the text box of start & finish & show the new start time, and then the new finish time.

 

such thing possible??

 

 

Capture10.JPG

 

@Anonymous 

Glad we got there!!

 

Yes, you can capture your Patch output:

With({dataItem:   // Your Record
    LookUp(SortByColumns(Downtime, "Start", Descending), 
        Operator = Operator_dropdown_1.Selected.Value && 
        Machine= Machine_dropdown_1.Selected.Value && 
        Reason.Value= Reason_dropdown.Selected.Value
    )},
    With({newTrue:   // Your criteria for a new record
        (IsBlank(dataItem.Start) && IsBlank(dataItem.Finish)) || 
        (!IsBlank(dataItem.Start) && !IsBlank(dataItem.Finish))
    },

        // Your Patch to the DataSource
        Set(glbDownRecord,
            Patch(Downtime,
                If(newTrue, Defaults(Downtime), dataItem),
                Patch(
                    {
                    Operator:Operator_dropdown_1.Selected.Value,
                    Machine:Machine_dropdown_1.Selected.Value,
                    Reason:Reason_dropdown.Selected.Value
                    },
                    If(newTrue, {Start:Now()}, {Finish:Now()})
                )
            )
        )
    ) 
)

 

Then just set the Text property of the Start and Finish labels (assumed labels as you'd not want to edit them) to glbDownRecord.Start and glbDownRecord.Finish accordingly.

 

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!
Anonymous
Not applicable

Hi @RandyHayes ,

Thanks again.

 

its working superb. 

 

Many thanks for your kind help all this time.

 

 

Helpful resources

Announcements

Celebrating the May Super User of the Month: Laurens Martens

  @LaurensM  is an exceptional contributor to the Power Platform Community. Super Users like Laurens inspire others through their example, encouragement, and active participation. We are excited to celebrated Laurens as our Super User of the Month for May 2024.   Consistent Engagement:  He consistently engages with the community by answering forum questions, sharing insights, and providing solutions. Laurens dedication helps other users find answers and overcome challenges.   Community Expertise: As a Super User, Laurens plays a crucial role in maintaining a knowledge sharing environment. Always ensuring a positive experience for everyone.   Leadership: He shares valuable insights on community growth, engagement, and future trends. Their contributions help shape the Power Platform Community.   Congratulations, Laurens Martens, for your outstanding work! Keep inspiring others and making a difference in the community!   Keep up the fantastic work!        

Check out the Copilot Studio Cookbook today!

We are excited to announce our new Copilot Cookbook Gallery in the Copilot Studio Community. We can't wait for you to share your expertise and your experience!    Join us for an amazing opportunity where you'll be one of the first to contribute to the Copilot Cookbook—your ultimate guide to mastering Microsoft Copilot. Whether you're seeking inspiration or grappling with a challenge while crafting apps, you probably already know that Copilot Cookbook is your reliable assistant, offering a wealth of tips and tricks at your fingertips--and we want you to add your expertise. What can you "cook" up?   Click this link to get started: https://aka.ms/CS_Copilot_Cookbook_Gallery   Don't miss out on this exclusive opportunity to be one of the first in the Community to share your app creation journey with Copilot. We'll be announcing a Cookbook Challenge very soon and want to make sure you one of the first "cooks" in the kitchen.   Don't miss your moment--start submitting in the Copilot Cookbook Gallery today!     Thank you,  Engagement Team

Announcing Power Apps Copilot Cookbook Gallery

We are excited to share that the all-new Copilot Cookbook Gallery for Power Apps is now available in the Power Apps Community, full of tips and tricks on how to best use Microsoft Copilot as you develop and create in Power Apps. The new Copilot Cookbook is your go-to resource when you need inspiration--or when you're stuck--and aren't sure how to best partner with Copilot while creating apps.   Whether you're looking for the best prompts or just want to know about responsible AI use, visit Copilot Cookbook for regular updates you can rely on--while also serving up some of your greatest tips and tricks for the Community. Check Out the new Copilot Cookbook for Power Apps today: Copilot Cookbook - Power Platform Community.  We can't wait to see what you "cook" up!      

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Top Solution Authors
Top Kudoed Authors
Users online (6,055)