cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Erng2
Frequent Visitor

My leave request template Balance Add Selection checkbox for Half day & Full day Calculate

On the SelectDate Screen I would like to add a button control (Checkbox) to allow staff to apply for either full day(s) or half days AM or PM.
I would need the calculation for requested days to be applied for the choice selected, 

 

Please see Attached file.

 

1 ACCEPTED SOLUTION

Accepted Solutions
SkiDK
Solution Sage
Solution Sage

Hi @Erng2 

I made a quick replica of your case.

Capture.PNG

It works for me with next code. 

Label:

If(
    Fullday_2.Value,
    RoundDown(DateDiff(LeaveStartDatePicker_3.SelectedDate, LeaveEndDatePicker_3.SelectedDate, Days) / 7, 0) * 5 +
    Mod(5 + Weekday(LeaveEndDatePicker_3.SelectedDate) - Weekday(LeaveStartDatePicker_3.SelectedDate), 5)
    + If(AM_1.Value,0.5,1)
    + If(PM_1.Value,-0.5)
    - CountIf(HolidaysCollection,Date>=LeaveStartDatePicker_3.SelectedDate,Date<=LeaveEndDatePicker_3.SelectedDate)
,
    AM_1.Value || PM_1.Value,
    0.5
)
& " Days"

Of course you should check if Fullday was not checked, to see whether a half a day is to be counter for AM or PM.

And if you want to save the amount of days to a variable:

If(
    Fullday_2.Value,
    Set(vDaysLeave,
        RoundDown(DateDiff(LeaveStartDatePicker_3.SelectedDate, LeaveEndDatePicker_3.SelectedDate, Days) / 7, 0) * 5 +
        Mod(5 + Weekday(LeaveEndDatePicker_3.SelectedDate) - Weekday(LeaveStartDatePicker_3.SelectedDate), 5)
        + If(AM_1.Value,0.5,1)
        + If(PM_1.Value,-0.5)
        - CountIf(HolidaysCollection,Date>=LeaveStartDatePicker_3.SelectedDate,Date<=LeaveEndDatePicker_3.SelectedDate)
    )
,
    AM_1.Value || PM_1.Value,
    Set(vDaysLeave,
        0.5
    )
)

Make sure that in your HolidaysCollection the date is set as a date and not a string. Made a quick test list like this:

ClearCollect(HolidaysCollection,{Name: "hol1", Date: DateValue("2020-07-20")}, {Name: "hol2", Date: DateValue("2020-07-22")})

 Hope this helps!

View solution in original post

9 REPLIES 9
SkiDK
Solution Sage
Solution Sage

Hi @Erng2 

You could make your calculation based on which checkbox is selected. If the whole day, just calculate the difference in days and if it's half a day just make the same calculation and divide by 2. Of course add 1 to base calculation because the first day should be counted as a day as well.

 

If(
  FullDay.Value,
  DateDiff( DateFrom.SelectedDate, DateTo.SelectedDate, Days) + 1
  Morning.Value || Afternoon.Value,
  (DateDiff( DateFrom.SelectedDate, DateTo.SelectedDate, Days) + 1) / 2
)

 

 This of course does not yet take into account weekends and holidays. For that look to next article: https://powerapps.microsoft.com/es-es/blog/excluding-weekends-and-holidays-in-date-differences-in-po...

Hope this helps!

Erng2
Frequent Visitor

please let me know why we cant put leave more 1.5 days, but we follow with your comment and result not working. how can i make leave with power app more 1.5 days ,2.5 days 4.5 days etc

 

Please see Attached file.

SkiDK
Solution Sage
Solution Sage

Hi @Erng2 

I forgot that if you were to take vacation over a longer period, but that you can start in the afternoon meaning only the first day should be half but not the rest. It really depends on how the logic should be. 

If I look in your attached file you have next case:

  • Start date in afternoon on 6/24/2020 - 0.5 days
  • Full day on 6/25/2020 - 1 day
  • Full day on 6/26/2020 - 1 day

So total is 2.5 days right?

I simplified the calculation to next and explanation below with your case between the ( ) :

 

DateDiff( DateFrom.SelectedDate, DateTo.SelectedDate, Days) + if(Afternoon.Value, 0.5, 1) + If(Morning.Value, -0.5)

 

 

  1. First we get the date difference (difference in days from 6/24 to 6/26 is 2 days)
  2. Then we see if the period starts from morning or in the afternoon (afternoon - 0.5 days). Since date difference doesn't add up the first day because it only calculates the difference, you must add up 1 day (difference in days from 6/24 to 6/24 is 0 days, but should still counted as a vacation day), but if we only start in the afternoon only 0.5 days have to be add up. Thus we check if Afternoon is checked, and if so +0.5 days and else +1 day
  3. Then we check whether the period stops at the end of the day or in the middle of the day. So for the day is counted as a whole day, so if Morning is check it means that you have to subtract 0.5 days from the total. If not, then nothing should be added.  

I left out the Fullday checkbox because this way we calculate the total based on full days and add or subtract according morning or afternoon. Then to make it clear you could still add validation to check if fullday nonetheless is checked, although it's not used.

I hope this helps better. 

Erng2
Frequent Visitor

Hi @SkiDK ,
Thank you for the formula. After that, I followed the formula from you and I'm sorry to bother you again. I can't edit that formula and I need more than 1 option ( Mulitple Selected checkbox) as attached.

 

formula >> 
If(Fullday_2.Value,RoundDown(DateDiff(LeaveStartDatePicker_3.SelectedDate, LeaveEndDatePicker_3.SelectedDate, Days) / 7, 0) * 5 + Mod(6 + Weekday(LeaveEndDatePicker_3.SelectedDate) - Weekday(LeaveStartDatePicker_3.SelectedDate), 5),DateDiff( LeaveStartDatePicker_3.SelectedDate, LeaveEndDatePicker_3.SelectedDate, Days) + If(AM_1.Value,0.5,1) + If(PM_1.Value,-0.5) -CountIf(HolidaysCollection, StartDate >= LeaveStartDatePicker_3.SelectedDate, StartDate <= LeaveEndDatePicker_3.SelectedDate)) & " Days" 

 

This formula I made it, but I'm not sure the formula is correct or not.?

 

I don't know where I set formula ?  

SkiDK
Solution Sage
Solution Sage

Hi @Erng2 

I made a quick replica of your case.

Capture.PNG

It works for me with next code. 

Label:

If(
    Fullday_2.Value,
    RoundDown(DateDiff(LeaveStartDatePicker_3.SelectedDate, LeaveEndDatePicker_3.SelectedDate, Days) / 7, 0) * 5 +
    Mod(5 + Weekday(LeaveEndDatePicker_3.SelectedDate) - Weekday(LeaveStartDatePicker_3.SelectedDate), 5)
    + If(AM_1.Value,0.5,1)
    + If(PM_1.Value,-0.5)
    - CountIf(HolidaysCollection,Date>=LeaveStartDatePicker_3.SelectedDate,Date<=LeaveEndDatePicker_3.SelectedDate)
,
    AM_1.Value || PM_1.Value,
    0.5
)
& " Days"

Of course you should check if Fullday was not checked, to see whether a half a day is to be counter for AM or PM.

And if you want to save the amount of days to a variable:

If(
    Fullday_2.Value,
    Set(vDaysLeave,
        RoundDown(DateDiff(LeaveStartDatePicker_3.SelectedDate, LeaveEndDatePicker_3.SelectedDate, Days) / 7, 0) * 5 +
        Mod(5 + Weekday(LeaveEndDatePicker_3.SelectedDate) - Weekday(LeaveStartDatePicker_3.SelectedDate), 5)
        + If(AM_1.Value,0.5,1)
        + If(PM_1.Value,-0.5)
        - CountIf(HolidaysCollection,Date>=LeaveStartDatePicker_3.SelectedDate,Date<=LeaveEndDatePicker_3.SelectedDate)
    )
,
    AM_1.Value || PM_1.Value,
    Set(vDaysLeave,
        0.5
    )
)

Make sure that in your HolidaysCollection the date is set as a date and not a string. Made a quick test list like this:

ClearCollect(HolidaysCollection,{Name: "hol1", Date: DateValue("2020-07-20")}, {Name: "hol2", Date: DateValue("2020-07-22")})

 Hope this helps!

View solution in original post

Erng2
Frequent Visitor

Hi @SkiDK  Thank you for The Formula,  And I learned More about for Power apps and Formula ,

 

Other than that, can I bring information from the Checkbox to set up in the system? leave request template  How to ?


Formula >> 

//**** CALCULATION USED TO DETERMINE TOTAL WORK DAYS REQUESTED ****
If(LeaveStartDatePicker.SelectedDate <= LeaveEndDatePicker.SelectedDate,
Set(_inclusiveTotalDaysRequested, DateDiff(LeaveStartDatePicker.SelectedDate, LeaveEndDatePicker.SelectedDate, Days) + 1);
Set(_numFullWeeks, RoundDown(_inclusiveTotalDaysRequested / 7, 0));
Set(_numFullDaysPartialWeek, _inclusiveTotalDaysRequested - _numFullWeeks * 7);
Concurrent(Set(_startWeekday, Weekday(LeaveStartDatePicker.SelectedDate)), Set(_endWeekday, Weekday(LeaveEndDatePicker.SelectedDate)));
//calculates the number of business days in the partial week left over after whole weeks are subtracted out of total days requested
If(_numFullDaysPartialWeek = 6,
If(_startWeekday <= 2, Set(_numPartialWeekdays, 5), Set(_numPartialWeekdays, 4)
),
_numFullDaysPartialWeek = 5,
If(_startWeekday = 2, Set(_numPartialWeekdays, 5), _startWeekday = 1 || _startWeekday = 3 || _startWeekday = 4, Set(_numPartialWeekdays, 4), Set(_numPartialWeekdays, 3)
),
_numFullDaysPartialWeek = 4,
If(_startWeekday = 2 || _startWeekday = 3, Set(_numPartialWeekdays, 4), _startWeekday = 1 || _startWeekday = 4, Set(_numPartialWeekdays, 3), Set(_numPartialWeekdays, 2)
),
_numFullDaysPartialWeek = 3,
If(_startWeekday = 6 || _startWeekday = 7, Set(_numPartialWeekdays, 1), _startWeekday = 1 || _startWeekday = 5, Set(_numPartialWeekdays, 2), Set(_numPartialWeekdays, 3)
),
_numFullDaysPartialWeek = 2,
If(_startWeekday = 7, Set(_numPartialWeekdays, 0), _startWeekday = 1 || _startWeekday = 6, Set(_numPartialWeekdays, 1), Set(_numPartialWeekdays, 2)),
_numFullDaysPartialWeek = 1,
If(_startWeekday = 1 || _startWeekday = 7, Set(_numPartialWeekdays, 0), Set(_numPartialWeekdays, 1)
),
_numFullDaysPartialWeek = 0, Set(_numPartialWeekdays, 0)
);
Set(_workDaysInRequest, _numFullWeeks * 5 + _numPartialWeekdays);
Set(_holidaysInRequest, CountIf(Holidays, StartDate >= LeaveStartDatePicker.SelectedDate, StartDate <= LeaveEndDatePicker.SelectedDate));
Set(_requestedDays, _workDaysInRequest - _holidaysInRequest)); 
If(Fullday_2.Value,set(_requestedDays,
RoundDown(DateDiff(LeaveStartDatePicker_3.SelectedDate, LeaveEndDatePicker_3.SelectedDate, Days) / 7, 0) * 5 +
Mod(5 + Weekday(LeaveEndDatePicker_3.SelectedDate) - Weekday(LeaveStartDatePicker_3.SelectedDate), 5)+ If(AM_1.Value,0.5,1) + If(PM_1.Value,-0.5)
-CountIf(HolidaysCollection, StartDate >= LeaveStartDatePicker_3.SelectedDate, StartDate <= LeaveEndDatePicker_3.SelectedDate),AM_1.Value || PM_1.Value,set(_requestedDays,0.5) & " Days"

 

This formula I made it, but I'm not sure the formula is correct or not.?

 

Set Variables >> _requestedDays

 

Output Example : leave Balance  for Vacation 10 days - I used 1.5 days  =  Total 8.5 days 

 

Thank you , 

Erng2
Frequent Visitor

Hi , Everyone & @SkiDK 

Thank you for The Formula,  And I learned More about for Power apps and Formula ,I'm sorry to bother you again Because i trying And i can't fix it

 

Other than that, can I bring information from the Checkbox to set up in the system? leave request template  How to ?
Formula >> form leavestartdatepicker  >> OnSelect 


Label 

 


//**** CALCULATION USED TO DETERMINE TOTAL WORK DAYS REQUESTED ****
If(LeaveStartDatePicker.SelectedDate <= LeaveEndDatePicker.SelectedDate,If(Fullday_2.Value,
Set(_inclusiveTotalDaysRequested, DateDiff(LeaveStartDatePicker.SelectedDate, LeaveEndDatePicker.SelectedDate, Days) + 1);
Set(_numFullWeeks, RoundDown(_inclusiveTotalDaysRequested / 7, 0));
Set(_numFullDaysPartialWeek, _inclusiveTotalDaysRequested - _numFullWeeks * 7);
Concurrent(Set(_startWeekday, Weekday(LeaveStartDatePicker.SelectedDate)), Set(_endWeekday, Weekday(LeaveEndDatePicker.SelectedDate)));

//calculates the number of business days in the partial week left over after whole weeks are subtracted out of total days requested
If(_numFullDaysPartialWeek = 6,
If(_startWeekday <= 2, Set(_numPartialWeekdays, 5), Set(_numPartialWeekdays, 4)
),
_numFullDaysPartialWeek = 5,
If(_startWeekday = 2, Set(_numPartialWeekdays, 5), _startWeekday = 1 || _startWeekday = 3 || _startWeekday = 4, Set(_numPartialWeekdays, 4), Set(_numPartialWeekdays, 3)
),
_numFullDaysPartialWeek = 4,
If(_startWeekday = 2 || _startWeekday = 3, Set(_numPartialWeekdays, 4), _startWeekday = 1 || _startWeekday = 4, Set(_numPartialWeekdays, 3), Set(_numPartialWeekdays, 2)
),
_numFullDaysPartialWeek = 3,
If(_startWeekday = 6 || _startWeekday = 7, Set(_numPartialWeekdays, 1), _startWeekday = 1 || _startWeekday = 5, Set(_numPartialWeekdays, 2), Set(_numPartialWeekdays, 3)
),
_numFullDaysPartialWeek = 2,
If(_startWeekday = 7, Set(_numPartialWeekdays, 0), _startWeekday = 1 || _startWeekday = 6, Set(_numPartialWeekdays, 1), Set(_numPartialWeekdays, 2)),
_numFullDaysPartialWeek = 1,
If(_startWeekday = 1 || _startWeekday = 7, Set(_numPartialWeekdays, 0), Set(_numPartialWeekdays, 1)
),
_numFullDaysPartialWeek = 0, Set(_numPartialWeekdays, 0)
);
Set(_workDaysInRequest, _numFullWeeks * 5 + _numPartialWeekdays +If(Morning_1.Value,0.5,1) + If(Afternoon_1.Value,-0.5));
Set(_holidaysInRequest, CountIf(Holidays, StartDate >= LeaveStartDatePicker.SelectedDate, StartDate <= LeaveEndDatePicker.SelectedDate));
Set(_requestedDays, _workDaysInRequest - _holidaysInRequest)
,Morning_1.Value || Afternoon_1.Value,Set(_requestedDays,0.5))


 This formula, I put it on But I'm not sure if the formula is correct or not?


Set Variables >> _requestedDays 

Output Example : leave Balance  for Vacation 10 days - I used 1.5 days  =  Total 8.5 days  

How to Update or Patch  the system to Data.xlsx & leave request template  ?  

 


Please see Attached file.

This is exactly what i'm trying to do - did you find a solution and how/where to add those check boxes on the LeaveStartDatePicker?

spow
Frequent Visitor

Did anyone find a resolve for this? I've used the template and it's working perfectly but the ability to book a half day is required.

I've tried the formulas in the thread above and the one where a variable is created "sort of" works but it is not consistent. 

Helpful resources

Announcements
PA User Group

Welcome to the User Group Public Preview

Check out new user group experience and if you are a leader please create your group

secondImage

Demo Extravaganza is Back!

We are excited to announce that Demo Extravaganza for 2021 has started!

MBAS on Demand

Microsoft Business Applications Summit sessions

On-demand access to all the great content presented by the product teams and community members! #MSBizAppsSummit #CommunityRocks

Power Apps June 2021

June Power Apps Community Call

Don't miss the call this month on June 16th - 8a PDT

Top Solution Authors
Top Kudoed Authors
Users online (73,344)