cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
ericonline
Community Champion
Community Champion

Need help with diffing times (commented code :) )

Hello, (didn't want this to get buried because the other thread was marked with a Solution")

 

I really need help determining the difference between two times. This is quite a challenging undertaking! 

 

Two Date+Time cards: 

dateDiffWithHoursAndMinutes.png

 

Code (get your wading boots on!): 

//Concatenate the diffed Hours, ":" and diffed Minutes//

Concatenate
(

//Convert the diffed Hours and Minutes to Text//
Text(

//Perform DateDiff to determine difference between Hours//
DateDiff(

//Use DateTimeValue to format the text string to Hours//
DateTimeValue(

//Get start date, hour and minutes into a format that DateTimeValue likes. Note the Char(13)! (clever)//
Concatenate( Text( startDate.SelectedDate,DateTimeFormat.ShortDate), Char(13), Text( Concatenate( startHour.Selected.Value, ":", startMinute.Selected.Value),ShortTime)),"en-US"), DateTimeValue(

//Get end date, hours and minutes into a format that DateTimeValue likes.
Concatenate( Text( endDate.SelectedDate,DateTimeFormat.ShortDate), Char(13), Text( Concatenate( endHour.Selected.Value, ":", endMinute.Selected.Value),ShortTime)),"en-US"), Hours),"[$-en-US]##"), ":",

//Do the same thing for Minutes//

Text( DateDiff( DateTimeValue( Concatenate( Text( startDate.SelectedDate,DateTimeFormat.ShortDate), Char(13), Text( Concatenate( startHour.Selected.Value, ":", startMinute.Selected.Value),ShortTime)),"en-US"), DateTimeValue( Concatenate( Text( endDate.SelectedDate,DateTimeFormat.ShortDate), Char(13), Text( Concatenate( endHour.Selected.Value, ":", endMinute.Selected.Value),ShortTime)),"en-US"), Minutes),"[$-en-US]##") )

But this results in: 

dateDiffWithHoursAndMinutes1.png

 

How do I get the correct times to display? 


Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Good point - I hadn't tested my logic for when the start date is greater than the end date.

 

One solution is to check whether this is the case, and if so, add a '-' in front of the difference (if you want to indicate that), and make all the calculations with the absolute value (via the Abs function) of the date differences:

"Hours:Minutes: " &
    If(DateDiff(
        startDate.SelectedDate +
            Time(Value(startHour.Selected.Value), Value(startMinute.Selected.Value), 0),
        endDate.SelectedDate +
            Time(Value(endHour.Selected.Value), Value(endMinute.Selected.Value), 0),
        Minutes) < 0,
    "-", "") &

Text(
    Abs(
        DateDiff(
            startDate.SelectedDate +
                Time(Value(startHour.Selected.Value), Value(startMinute.Selected.Value), 0),
            endDate.SelectedDate +
                Time(Value(endHour.Selected.Value), Value(endMinute.Selected.Value), 0),
            Hours)),
    "00") & ":" &
Text(
    Mod(
        Abs(
            DateDiff(
                startDate.SelectedDate +
                    Time(Value(startHour.Selected.Value), Value(startMinute.Selected.Value), 0),
                endDate.SelectedDate +
                    Time(Value(endHour.Selected.Value), Value(endMinute.Selected.Value), 0),
                Minutes)),
        60),
    "00")

The formula should work now (see the attached app ForumThread134813b.msapp), but it's getting way too big - there's a lot of repeated sub-expressions. PowerApps currently doesn't support reusing sub-expressions, so one technique that I've used in the past is to store those expressions in controls (such as labels), and hide them before saving the app. If we have 5 labels with the following expressions:

lblDiffTotalMinutes.Text: DateDiff(
        startDate.SelectedDate +
            Time(Value(startHour.Selected.Value), Value(startMinute.Selected.Value), 0),
        endDate.SelectedDate +
            Time(Value(endHour.Selected.Value), Value(endMinute.Selected.Value), 0),
        Minutes)
lblDiffMinutes.Text: Mod(Abs(Value(lblDiffTotalMinutes.Text)), 60)
lblDiffTotalHours.Text: RoundDown(Abs(Value(lblDiffTotalMinutes.Text)) / 60, 0)
lblDiffHours.Text: Mod(Value(lblDiffTotalHours.Text), 24)
lblDiffDays.Text: RoundDown(Abs(Value(lblDiffTotalHours.Text)) / 24, 0)

Then you can reference their values when displaying the time difference to the user:

If(Value(lblDiffTotalMinutes.Text) < 0, "-", "") &
    Value(lblDiffTotalHours.Text) &
    ":" &
    Text(Value(lblDiffMinutes.Text), "00")

This technique is also shown in the attached app.

 

Hope this helps!

View solution in original post

10 REPLIES 10
CarlosFigueira
Power Apps
Power Apps

That's indeed a big expression :). One thing you can use is the Time function - the values passed to it don't necessarily need to be between 0 and 59 for the minutes. If you call Time(1, 75, 0), for example, it will give you a time of 2:15.

 

You can also make the DateTime values by adding the selected date to the time, instead of converting them to string and then back to date/time (that may not work in all languages, for example). So if you use this expression:

Time(
    0,
    DateDiff(
        startDate.SelectedDate +
Time(Value(startHour.Selected.Value), Value(startHour.Selected.Value), 0), endDate.SelectedDate +
Time(Value(endHour.Selected.Value), Value(endHour.Selected.Value), 0), Minutes), 0)

You should get the time difference.

@CarlosFigueira, thank you for taking the time to respond! Its hard to find this info out there. 

 

I'm not able to get the formula quite right though... Its returning actual time of day, not number of hours. I edited your code a bit as I think the startHour field was duplicated. 

Time(
    0,
    DateDiff(
        startDate.SelectedDate +
            Time(Value(startHour.Selected.Value), Value(startMinute.Selected.Value), 0),
        endDate.SelectedDate +
            Time(Value(endHour.Selected.Value), Value(endMinute.Selected.Value), 0),
        Minutes),
    0)

Please see below for how it reacts: 

timeDiff.gif

 

Notice how its showing TIME not # of hours. And when I change the endDate to another day, the # of hours doesn't reflect. Any more ideas on what I should check? 

Hi @CarlosFigueira. I've been deep in this for a day or so. If I could pick your brain again, It'd be much appreciated. 

 

almost got it, but the minutes is showing negative numbers when calculating hours that span midnight. 

 

The label in the top right reflects the code below. Notice the "-30" in the minutes column: 

diffTimes.png

 

Here is the code that works UNTIL I span midnight (startDate does not equal endDate): 

Concatenate(
    Text(
        DateDiff(
            startDate.SelectedDate +
                Time(
                    Value(startHour.Selected.Value),
                0, 0),
            endDate.SelectedDate +
                Time(
                    Value(endHour.Selected.Value),
                0, 0),
    Hours),"[$-en-US]##"),

    ":",

    Text(
        If(
            endDate.SelectedDate > startDate.SelectedDate,  //This is for calculating hours that span midnight. Without this, the minutes column is WAY off.//
            DateDiff(
                startDate.SelectedDate +
                Time(0, Value(startMinute.Selected.Value), 0),
                startDate.SelectedDate +
                Time(0, Value(endMinute.Selected.Value), 0),
            Minutes),

            DateDiff(
                startDate.SelectedDate +
                Time(0, Value(startMinute.Selected.Value), 0),
                endDate.SelectedDate +
                Time(0, Value(endMinute.Selected.Value), 0),
            Minutes)
        )
    )
)

If you want the data formatted in the hour/minute One way you can implement that is by using the expression below:

Text(
    DateDiff(
        startDate.SelectedDate +
            Time(Value(startHour.Selected.Value); Value(startMinute.Selected.Value); 0);
        endDate.SelectedDate +
            Time(Value(endHour.Selected.Value); Value(endMinute.Selected.Value); 0);
        Hours);
    "00") & ":" &
Text(
    Mod(
        DateDiff(
            startDate.SelectedDate +
                Time(Value(startHour.Selected.Value); Value(startMinute.Selected.Value); 0);
            endDate.SelectedDate +
                Time(Value(endHour.Selected.Value); Value(endMinute.Selected.Value); 0);
            Minutes);
        60);
    "00")

The idea is that you first retrieve the difference in hours (so even if the difference is more than 24 hours, you'll still have the number of hours. Later you can retrieve the difference in minutes, and take the remainder of the division by 60, to get the number of minutes only.

 

The attached app has some examples of visualizations for the time difference, like in the image below:

ForumPost001.PNG

Hi @CarlosFigueira. I really appreciate you time on this issue. Unfortunately this function is not correct when the startTime minutes value > endTime minutes value. 

 

Example:

  • Start a project at 00:30
  • Finishe project at 10:20
  • Your Hours:Minutes function shows "10:50" but I believe the true answer is 9 hours and 50 minutes. 

timeIncorrect.png

Its very apparent in this example: 

  • Start project at 00:30
  • End at 10:30
  • Hours:Minutes looks good

timeIssue1.png

 

But as soon as startTime minute value is > endTime minute value, the summation is incorrect. 

Here adding 5 minutes ot startTime results in 55 minutes of time being added. 

timeIssue2.png

 

This was stumping me as well which is why I tried the: 

Text(
        If(
            endDate.SelectedDate > startDate.SelectedDate,  //This is for calculating hours that span midnight. Without this, the minutes column is WAY off.//
            DateDiff(
                startDate.SelectedDate +
                Time(0, Value(startMinute.Selected.Value), 0),
                startDate.SelectedDate +
                Time(0, Value(endMinute.Selected.Value), 0),
            Minutes),

            DateDiff(
                startDate.SelectedDate +
                Time(0, Value(startMinute.Selected.Value), 0),
                endDate.SelectedDate +
                Time(0, Value(endMinute.Selected.Value), 0),
            Minutes)
        )

But this results in weird negative numbers in the minutes column. Man! This is not easy! Do you have any other ideas I can pursue? 

I think the answer lies somewhere in using your function for the decimal # of hours and the following: 

Text(Time(9, .91666667 * 60,0),"[$-en-US]hh:mm")

Where "9" is the result in hours, ".91666667" is the result in minutes. 

 

This produces the correct format and such, I just can't seem to figure out how to Split the decimal hours and get them into the above function. 

Good point - I hadn't tested my logic for when the start date is greater than the end date.

 

One solution is to check whether this is the case, and if so, add a '-' in front of the difference (if you want to indicate that), and make all the calculations with the absolute value (via the Abs function) of the date differences:

"Hours:Minutes: " &
    If(DateDiff(
        startDate.SelectedDate +
            Time(Value(startHour.Selected.Value), Value(startMinute.Selected.Value), 0),
        endDate.SelectedDate +
            Time(Value(endHour.Selected.Value), Value(endMinute.Selected.Value), 0),
        Minutes) < 0,
    "-", "") &

Text(
    Abs(
        DateDiff(
            startDate.SelectedDate +
                Time(Value(startHour.Selected.Value), Value(startMinute.Selected.Value), 0),
            endDate.SelectedDate +
                Time(Value(endHour.Selected.Value), Value(endMinute.Selected.Value), 0),
            Hours)),
    "00") & ":" &
Text(
    Mod(
        Abs(
            DateDiff(
                startDate.SelectedDate +
                    Time(Value(startHour.Selected.Value), Value(startMinute.Selected.Value), 0),
                endDate.SelectedDate +
                    Time(Value(endHour.Selected.Value), Value(endMinute.Selected.Value), 0),
                Minutes)),
        60),
    "00")

The formula should work now (see the attached app ForumThread134813b.msapp), but it's getting way too big - there's a lot of repeated sub-expressions. PowerApps currently doesn't support reusing sub-expressions, so one technique that I've used in the past is to store those expressions in controls (such as labels), and hide them before saving the app. If we have 5 labels with the following expressions:

lblDiffTotalMinutes.Text: DateDiff(
        startDate.SelectedDate +
            Time(Value(startHour.Selected.Value), Value(startMinute.Selected.Value), 0),
        endDate.SelectedDate +
            Time(Value(endHour.Selected.Value), Value(endMinute.Selected.Value), 0),
        Minutes)
lblDiffMinutes.Text: Mod(Abs(Value(lblDiffTotalMinutes.Text)), 60)
lblDiffTotalHours.Text: RoundDown(Abs(Value(lblDiffTotalMinutes.Text)) / 60, 0)
lblDiffHours.Text: Mod(Value(lblDiffTotalHours.Text), 24)
lblDiffDays.Text: RoundDown(Abs(Value(lblDiffTotalHours.Text)) / 24, 0)

Then you can reference their values when displaying the time difference to the user:

If(Value(lblDiffTotalMinutes.Text) < 0, "-", "") &
    Value(lblDiffTotalHours.Text) &
    ":" &
    Text(Value(lblDiffMinutes.Text), "00")

This technique is also shown in the attached app.

 

Hope this helps!

Just bumping this up here. @CarlosFigueira , the sample app you provided here is INVALUABLE to anyone needing to diff dateTimes. I refer to it often.

Thanks again!

hi, it does not work for me, but strangely it does not throw any mistakes with the reference ... they come aan error by the & (dieser Vefehl erzeugt einen Zirkelverweis - was ist das eigentlich?)
i want to draw in a textx box

Helpful resources

Announcements

Power Platform Connections - Episode 7 | March 30, 2023

Episode Seven of Power Platform Connections sees David Warner and Hugo Bernier talk to Microsoft MVP Dian Taylor, alongside the latest news, product reviews, and community blogs.     Use the hashtag #PowerPlatformConnects on social media for a chance to have your work featured on the show!      Show schedule in this episode:    0:00 Cold Open 00:30 Show Intro 01:02 Dian Taylor Interview 18:03 Blogs & Articles 26:55 Outro & Bloopers    Check out the blogs and articles featured in this week’s episode:    https://francomusso.com/create-a-drag-and-drop-experience-to-upload-case-attachments @crmbizcoach https://www.youtube.com/watch?v=G3522H834Ro​/  @pranavkhuranauk https://github.com/pnp/powerapps-designtoolkit/tree/main/materialdesign%20components @MMe2K​ https://2die4it.com/2023/03/27/populate-a-dynamic-microsoft-word-template-in-power-automate-flow/ @StefanS365 https://d365goddess.com/viva-sales-administrator-settings/ @D365Goddess https://marketplace.visualstudio.com/items?itemName=megel.mme2k-powerapps-helper#Visualize_Dataverse... @MMe2K    Action requested:  Feel free to provide feedback on how we can make our community more inclusive and diverse.    This episode premiered live on our YouTube at 12pm PST on Thursday 30th March 2023.    Video series available at Power Platform Community YouTube channel.    Upcoming events:  Business Applications Launch – April 4th – Free and Virtual! M365 Conference - May 1-5th - Las Vegas Power Apps Developers Summit – May 19-20th - London European Power Platform conference – Jun. 20-22nd - Dublin Microsoft Power Platform Conference – Oct. 3-5th - Las Vegas    Join our Communities:  Power Apps Community Power Automate Community Power Virtual Agents Community Power Pages Community    If you’d like to hear from a specific community member in an upcoming recording and/or have specific questions for the Power Platform Connections team, please let us know. We will do our best to address all your requests or questions.   

Announcing | Super Users - 2023 Season 1

Super Users – 2023 Season 1    We are excited to kick off the Power Users Super User Program for 2023 - Season 1.  The Power Platform Super Users have done an amazing job in keeping the Power Platform communities helpful, accurate and responsive. We would like to send these amazing folks a big THANK YOU for their efforts.      Super User Season 1 | Contributions July 1, 2022 – December 31, 2022  Super User Season 2 | Contributions January 1, 2023 – June 30, 2023    Curious what a Super User is? Super Users are especially active community members who are eager to help others with their community questions. There are 2 Super User seasons in a year, and we monitor the community for new potential Super Users at the end of each season. Super Users are recognized in the community with both a rank name and icon next to their username, and a seasonal badge on their profile.    Power Apps  Power Automate  Power Virtual Agents  Power Pages  Pstork1*  Pstork1*  Pstork1*  OliverRodrigues  BCBuizer  Expiscornovus*  Expiscornovus*  ragavanrajan  AhmedSalih  grantjenkins  renatoromao    Mira_Ghaly*  Mira_Ghaly*      Sundeep_Malik*  Sundeep_Malik*      SudeepGhatakNZ*  SudeepGhatakNZ*      StretchFredrik*  StretchFredrik*      365-Assist*  365-Assist*      cha_cha  ekarim2020      timl  Hardesh15      iAm_ManCat  annajhaveri      SebS  Rhiassuring      LaurensM  abm      TheRobRush  Ankesh_49      WiZey  lbendlin      Nogueira1306  Kaif_Siddique      victorcp  RobElliott      dpoggemann  srduval      SBax  CFernandes      Roverandom  schwibach      Akser  CraigStewart      PowerRanger  MichaelAnnis      subsguts  David_MA      EricRegnier  edgonzales      zmansuri  GeorgiosG      ChrisPiasecki  ryule      AmDev  fchopo      phipps0218  tom_riha      theapurva  takolota     Akash17  momlo     BCLS776  Shuvam-rpa     rampprakash  ScottShearer     Rusk  ChristianAbata     cchannon  Koen5     a33ik   Heartholme     AaronKnox        Matren        Alex_10        Jeff_Thorpe        poweractivate        Ramole        DianaBirkelbach        DavidZoon        AJ_Z        PriyankaGeethik        BrianS        StalinPonnusamy        HamidBee        CNT        Anonymous_Hippo        Anchov        KeithAtherton        alaabitar        Tolu_Victor        KRider        sperry1625        IPC_ahaas      zuurg    rubin_boer   cwebb365   Dorrinda   G1124   Gabibalaban   Manan-Malhotra   jcfDaniel   WarrenBelz   Waegemma      If an * is at the end of a user's name this means they are a Multi Super User, in more than one community. Please note this is not the final list, as we are pending a few acceptances.  Once they are received the list will be updated. 

Microsoft Power Platform Conference | Registration Open | Oct. 3-5 2023

We are so excited to see you for the Microsoft Power Platform Conference in Las Vegas October 3-5 2023! But first, let's take a look back at some fun moments and the best community in tech from MPPC 2022 in Orlando, Florida.   Featuring guest speakers such as Charles Lamanna, Heather Cook, Julie Strauss, Nirav Shah, Ryan Cunningham, Sangya Singh, Stephen Siciliano, Hugo Bernier and many more.   Register today: https://www.powerplatformconf.com/   

Check out the new Power Platform Communities Front Door Experience!

We are excited to share the ‘Power Platform Communities Front Door’ experience with you!   Front Door brings together content from all the Power Platform communities into a single place for our community members, customers and low-code, no-code enthusiasts to learn, share and engage with peers, advocates, community program managers and our product team members. There are a host of features and new capabilities now available on Power Platform Communities Front Door to make content more discoverable for all power product community users which includes ForumsUser GroupsEventsCommunity highlightsCommunity by numbersLinks to all communities Users can see top discussions from across all the Power Platform communities and easily navigate to the latest or trending posts for further interaction. Additionally, they can filter to individual products as well.       Users can filter and browse the user group events from all power platform products with feature parity to existing community user group experience and added filtering capabilities.     Users can now explore user groups on the Power Platform Front Door landing page with capability to view all products in Power Platform.    Explore Power Platform Communities Front Door today. Visit Power Platform Community Front door to easily navigate to the different product communities, view a roll up of user groups, events and forums.

Welcome to the Power Apps Community

Welcome! Congratulations on joining the Microsoft Power Apps community! You are now a part of a vibrant group of peers and industry experts who are here to network, share knowledge, and even have a little fun! Now that you are a member, you can enjoy the following resources:   The Microsoft Power Apps Community Forums If you are looking for support with any part of Microsoft Power Apps, our forums are the place to go. They are titled "Get Help with Microsoft Power Apps " and there you will find thousands of technical professionals with years of experience who are ready and eager to answer your questions. You now have the ability to post, reply and give "kudos" on the Power Apps community forums! Make sure you conduct a quick search before creating a new post because your question may have already been asked and answered!   Microsoft Power Apps IdeasDo you have an idea to improve the Microsoft Power Apps experience, or a feature request for future product updates? Then the "Power Apps Ideas" section is where you can contribute your suggestions and vote for ideas posted by other community members. We constantly look to the most voted Ideas when planning updates, so your suggestions and votes will always make a difference.   Community Blog & NewsOver the years, more than 600 Power Apps Community Blog Articles have been written and published by our thriving community. Our community members have learned some excellent tips and have keen insights on building Power Apps. On the Power Apps Community Blog, read the latest Power Apps related posts from our community blog authors around the world. Let us know if you would like to become an author and contribute your own writing — everything Power Apps related is welcome!   Power Apps Samples, Learning and Videos GalleriesOur galleries have a little bit of everything to do with Power Apps. Our galleries are great for finding inspiration for your next app or component. You can view, comment and kudo the apps and component gallery to see what others have created! Or share Power Apps that you have created with other Power Apps enthusiasts. Along with all of that awesome content, there is the Power Apps Community Video & MBAS gallery where you can watch tutorials and demos by Microsoft staff, partners, and community gurus in our community video gallery.   Again, we are excited to welcome you to the Microsoft Power Apps community family! Whether you are brand new to the world of process automation or you are a seasoned Power Apps veteran. Our goal is to shape the community to be your ‘go to’ for support, networking, education, inspiration and encouragement as we enjoy this adventure together!   Let us know in the Community Feedback if you have any questions or comments about your community experience.To learn more about the community and your account be sure to visit our Community Support Area boards to learn more! We look forward to seeing you in the Power Apps Community!The Power Apps Team

Top Solution Authors
Top Kudoed Authors
Users online (1,944)