cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
MH3
Post Prodigy
Post Prodigy

Nested If Condition Problem

Hi,

I have this code which is used in the OnScan property of Bar Code Control,  I am actually scanning only those codes which have selected "S" as a Prefix  for Serial Codes.  and "1S" as Prefix selected for Product and Serial Together bar code.

I am using a dropdown called as Prefix Selector

The Condition is working for "1S"  and it's showing popup if the code is scanned again, it will show Duplicate Scanned, and if the different code is scanned it will show a popup >>> Not a 1S Bar Code Type

Issue:  But the code for "S" creating some issues, if the user scans the serial code, it stores and works good, but if the user scans it again it shows both Popups >> Not a Serial Code and Duplicate Scanned at the same time and if the user scans a different code while "S" is selected, it shows popup >>> Not a 1S Bar Code Type (This is not working as expected, what's wrong is in my statements ??)

 

If(ToggleIssue.Value=false && PrefixSelected.Selected.Title = Left(BarcodeScanner2_3.Value,2),


 
// Left(BarCodeScanner2_3.Value,2) is used because if the user has selected ("1S") Prefix, than it will match with it while scanning and store Serial code and Product information.
 
 

If(IsEmpty(Filter('Barcodes - Test',  BarcodeScanner2_3.Value = Title)), 

 
\\ The Above if condition will checks in the Database if there is an entry or not , at first it will return false and then it will patch the data into the databse, and if the scanned code is scannned again it will show a popup to the user as Already Scanned.
 

   Patch('Barcodes - Test',    // Patch Command
   
   Defaults('Barcodes - Test'),

 

   {
   SerialCode:Right(BarcodeScanner2_3.Value,8),
   'Product Code': Mid(BarcodeScanner2_3.Value,3,10),
   Title:BarcodeScanner2_3.Value,
   'Batch No': BatchSelection.Selected.Title,
   ReceiveCheck: ToggleIssue.Value,
   UserName:MyUser,
   ReceivedSatus: "Yet To Receive",
   When:Today() + Time(Hour(Now()), Minute(Now()),Second(Now()))    
   }
),Set(_DuplicateScan,true)),  // Duplicate Popup

 

If(ToggleIssue.Value=false && PrefixSelected.Selected.Title = Left(BarcodeScanner2_3.Value,1),
 
// Left(BarCodeScanner2_3.Value,1) is used because if the user has selected ("S") Prefix, than it will match with it and store only Serial code information.

 

If(IsEmpty(Filter('Barcodes - Test',  BarcodeScanner2_3.Value = Title)), 

 

   Patch('Barcodes - Test',
   
   Defaults('Barcodes - Test'),

 

   {
   SerialCode: Right(BarcodeScanner2_3.Value,8),
   Title:BarcodeScanner2_3.Value,
   'Batch No': BatchSelection.Selected.Title,
   ReceiveCheck: ToggleIssue.Value,
   UserName:MyUser,
   ReceivedSatus: "Yet To Receive",
   When:Today() + Time(Hour(Now()), Minute(Now()),Second(Now()))    
   }

 

),Set(_DuplicateScan,true),
 

Set(_NotSerialCode,true))   // if the user has selected (1S) and if he tries to scan a serial code, or any other code which does not match, it will show a popup, Not a S  Code
 
,Set(_NotISCode,true)))  // if the user has selected (S) and if he tries to scan a serial code, or any other code which does not match, it will show a popup, Not a 1S  Code

 

  I Need Help @WarrenBelz  @v-siky-msft 

1 ACCEPTED SOLUTION

Accepted Solutions

@MH3 

I might have misunderstood your original logic in your Formula.

Replace with this Formula:

If(ToggleIssue.Value=false,

    Switch(PrefixSelected.Selected.Title,
        // if the user has selected (1S) and if he tries to scan a serial code, or any other code which does not match, it will show a popup, Not a 1S  Code
        "1S", Set(_NotISCode, !(PrefixSelected.Selected.Title = Left(BarcodeScanner2_3.Value,2))),
        
        // if the user has selected (S) and if he tries to scan a serial code, or any other code which does not match, it will show a popup, Not a S  Code
        "S", Set(_NotSerialCode, !(PrefixSelected.Selected.Title = Left(BarcodeScanner2_3.Value,1)))
    );
    
    If(!_NotISCode && !_NotSerialCode,

        // Is it a duplicate?
        If(!IsEmpty(Filter('Barcodes - Test',  BarcodeScanner2_3.Value = Title)),
            Set(_DuplicateScan, true), // Duplicate Popup
            
            // ELSE - Patch Command
            UpdateContext({patchedRecord:
                Patch('Barcodes - Test',    
                    Defaults('Barcodes - Test'),
                    {
                        SerialCode:Right(BarcodeScanner2_3.Value,8),
                        Title:BarcodeScanner2_3.Value,
                        'Batch No': BatchSelection.Selected.Title,
                        ReceiveCheck: ToggleIssue.Value,
                        UserName:MyUser, 
                        ReceivedSatus: "Yet To Receive",
                        When:Today() + Time(Hour(Now()), Minute(Now()),Second(Now()))    
                    },
                    If(PrefixSelected.Selected.Title="1S",
                        {'Product Code': Mid(BarcodeScanner2_3.Value,3,10)},
                        {}
                    )
                )
            })
        )
    )
)

 

 

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

View solution in original post

39 REPLIES 39
RandyHayes
Super User
Super User

@MH3 

Some of your conditions are not met properly in the Formula that you have.

Consider the following formula to replace yours:

If(!ToggleIssue.Value,

    Switch(PrefixSelected.Selected.Title,
        // if the user has selected (1S) and if he tries to scan a serial code, 
        // or any other code which does not match, it will show a popup, Not a 1S  Code
        "1S", Set(_NotISCode, !(PrefixSelected.Selected.Title = Left(BarcodeScanner2_3.Value,2))),
        
        // if the user has selected (S) and if he tries to scan a serial code, 
        // or any other code which does not match, it will show a popup, Not a S  Code
        "S", Set(_NotSerialCode, !(PrefixSelected.Selected.Title = Left(BarcodeScanner2_3.Value,1))),

        // Switch Else condition
        // Is it a duplicate?
        If(!IsEmpty(Filter('Barcodes - Test',  BarcodeScanner2_3.Value = Title))
            Set(_DuplicateScan, true), // Duplicate Popup
            
            // ELSE - Patch Command
            Patch('Barcodes - Test',    
                Defaults('Barcodes - Test'),
                {
	            SerialCode:Right(BarcodeScanner2_3.Value,8),
	            'Product Code': Mid(BarcodeScanner2_3.Value,3,10),
	            Title:BarcodeScanner2_3.Value,
	            'Batch No': BatchSelection.Selected.Title,
	            ReceiveCheck: ToggleIssue.Value,
	            UserName:MyUser, 
	            ReceivedSatus: "Yet To Receive",
	            When:Today() + Time(Hour(Now()), Minute(Now()),Second(Now()))    
	        }
            )
        )
    )
)

 

I hope this is helpful for you.

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

Hi @RandyHayes ,

Actually, there are two patch commands,
One is for Product and Serial together code, which is "1S" Prefix Patch, 

and another is for Serial code only, where only "S" Prefix  codes will be patched.

 

can you help me into that? 

@MH3 

I thought I saw a difference at first, but then seemed to see no difference. Now I do.  Easy adjustment, here is the formula:

If(!ToggleIssue.Value,

    Switch(PrefixSelected.Selected.Title,
        // if the user has selected (1S) and if he tries to scan a serial code, or any other code which does not match, it will show a popup, Not a 1S  Code
        "1S", Set(_NotISCode, !(PrefixSelected.Selected.Title = Left(BarcodeScanner2_3.Value,2))),
        
        // if the user has selected (S) and if he tries to scan a serial code, or any other code which does not match, it will show a popup, Not a S  Code
        "S", Set(_NotSerialCode, !(PrefixSelected.Selected.Title = Left(BarcodeScanner2_3.Value,1))),

        // Is it a duplicate?
        If(!IsEmpty(Filter('Barcodes - Test',  BarcodeScanner2_3.Value = Title))
            Set(_DuplicateScan, true), // Duplicate Popup
            
            // ELSE - Patch Command
            Patch('Barcodes - Test',    
                Defaults('Barcodes - Test'),
                {
	            SerialCode:Right(BarcodeScanner2_3.Value,8),
	            Title:BarcodeScanner2_3.Value,
	            'Batch No': BatchSelection.Selected.Title,
	            ReceiveCheck: ToggleIssue.Value,
	            UserName:MyUser, 
	            ReceivedSatus: "Yet To Receive",
	            When:Today() + Time(Hour(Now()), Minute(Now()),Second(Now()))    
	        },
	        If(PrefixSelected.Selected.Title="1S",
	            {'Product Code': Mid(BarcodeScanner2_3.Value,3,10)},
	            {}
	        )
            )
        )
    )
)

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

@RandyHayes , Thanks for the reply.

 

I actually can't test your formula right now, because I am now at home, but I will notify you when I test it tomorrow.

 

and one thing more, if there is a requirement to incorporate more prefixes how can I adjust my code, do I have to make these logic all the time? like creating different patch and different trimming functions according to the prefix ? is there any dynamic workaround? or anything which can make the work easier? like a setup process? user will select right trim, left trim, mid if needed, and the prefix and according to that code work? is that possible just asking for future thing.

@MH3 

No problem, see how it works for you.

 

For adding additional prefixes, you would just add more into the switch statement.

Ex:

If(!ToggleIssue.Value,

    Switch(PrefixSelected.Selected.Title,
        // if the user has selected (1S) and if he tries to scan a serial code, or any other code which does not match, it will show a popup, Not a 1S  Code
        "1S", Set(_NotISCode, !(PrefixSelected.Selected.Title = Left(BarcodeScanner2_3.Value,2))),
        
        // if the user has selected (S) and if he tries to scan a serial code, or any other code which does not match, it will show a popup, Not a S  Code
        "S", Set(_NotSerialCode, !(PrefixSelected.Selected.Title = Left(BarcodeScanner2_3.Value,1))),

        "OTHER", Set(somethingelse, somecondition),
...etc.

 

Although if you have a lot of different prefixes to add, I would consider re-evaluating the notification mechanism so that you don't end up with a ton of variables and different pop up boxes.  This can all be combined into one.

 

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

Yes, @RandyHayes  you are correct.

 

will take your assistance in that problem if it persist :).

 

 

One last thing, there is a requirement from the customer that sometimes they have loss of internet connection and sometimes when they scans the code, it just not update into SP List..

 

is there any workaround for that, any offline capability? for my application like if the connection is not connected it should save the data and when the connection is up patch those records into the database or SP List. 

 

I have searched for it, but couldn't find anything and couldn't understand how to implement that, because I don't know much about collection. can you help me if you don't mind?

@MH3 

Yes, offline capabilities are not something that are built into PowerApps.  You have to formulate a process to handle them.

It usually involves a serious re-look at the process you have now.  

You would need to "centralize" your Patching processes to someplace else and utilize a condition check on the connection.  If it has none, then you would need to store the patch information both in a collection and saved to the local device.  Then when a connection is available again, your app needs to recognize that and then patch all the records stored while offline.

There are many ways to go about it depending on your scenario, but there is nothing built in that would allow you to just "switch" it on or off.

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

@MH3 

In reading some of your other posts and messages on your original subject, I might have some of the "if" logic backward as I read your original formula and now your posts.  

So, in general it should all work, but there might be a need to switch the logic around to meet your needs.

See how it goes when you get a chance.

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

Yes, @RandyHayes 

 

I copied your formula, and it keeps giving error in switch statements, I tried to figure it out but got nothing!!!

 

you have any solution for my problem Please help!

Helpful resources

Announcements

Take a short Community User Survey | Help us make your experience better!

To ensure that we are providing the best possible experience for Community members, we want to hear from you!    We value your feedback! As part of our commitment to enhancing your experience, we invite you to participate in a brief 15-question survey. Your insights will help us improve our services and better serve the community.   👉 Community User Survey    Thank you for being an essential part of our community!    Power Platform Engagement Team  

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!

Calling all User Group Leaders and Super Users! Mark Your Calendars for the next Community Ambassador Call on May 9th!

This month's Community Ambassador call is on May 9th at 9a & 3p PDT. Please keep an eye out in your private messages and Teams channels for your invitation. There are lots of exciting updates coming to the Community, and we have some exclusive opportunities to share with you! As always, we'll also review regular updates for User Groups, Super Users, and share general information about what's going on in the Community.     Be sure to register & we hope to see all of you there!

April 2024 Community Newsletter

We're pleased to share the April Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzDeenujialexander2523ragavanrajanLaurensMManishSolankiMattJimisonLucas001AmikcapuanodanilostephenrobertOliverRodriguestimlAndrewJManikandanSFubarmmbr1606VishnuReddy1997theMacResolutionsVishalJhaveriVictorIvanidzejsrandhawahagrua33ikExpiscornovusFGuerrero1PowerAddictgulshankhuranaANBExpiscornovusprathyooSpongYeNived_Nambiardeeksha15795apangelesGochixgrantjenkinsvasu24Mfon   LATEST NEWS Business Applications Launch Event - On Demand In case you missed the Business Applications Launch Event, you can now catch up on all the announcements and watch the entire event on-demand inside Charles Lamanna's latest cloud blog.   This is your one stop shop for all the latest Copilot features across Power Platform and #Dynamics365, including first-hand looks at how companies such as Lenovo, Sonepar, Ford Motor Company, Omnicom and more are using these new capabilities in transformative ways. Click the image below to watch today!     Power Platform Community Conference 2024 is here! It's time to look forward to the next installment of the Power Platform Community Conference, which takes place this year on 18-20th September 2024 at the MGM Grand in Las Vegas!   Come and be inspired by Microsoft senior thought leaders and the engineers behind the #PowerPlatform, with Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab and Leon Welicki already confirmed to speak. You'll also be able to learn from industry experts and Microsoft MVPs who are dedicated to bridging the gap between humanity and technology. These include the likes of Lisa Crosbie, Victor Dantas, Kristine Kolodziejski, David Yack, Daniel Christian, Miguel Félix, and Mats Necker, with many more to be announced over the coming weeks.   Click here to watch our brand-new sizzle reel for #PPCC24 or click the image below to find out more about registration. See you in Vegas!     Power Up Program Announces New Video-Based Learning Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram. These include a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the image below to find out more!     UPCOMING EVENTS Microsoft Build - Seattle and Online - 21-23rd May 2024 Taking place on 21-23rd May 2024 both online and in Seattle, this is the perfect event to learn more about low code development, creating copilots, cloud platforms, and so much more to help you unleash the power of AI.   There's a serious wealth of talent speaking across the three days, including the likes of Satya Nadella, Amanda K. Silver, Scott Guthrie, Sarah Bird, Charles Lamanna, Miti J., Kevin Scott, Asha Sharma, Rajesh Jha, Arun Ulag, Clay Wesener, and many more.   And don't worry if you can't make it to Seattle, the event will be online and totally free to join. Click the image below to register for #MSBuild today!     European Collab Summit - Germany - 14-16th May 2024 The clock is counting down to the amazing European Collaboration Summit, which takes place in Germany May 14-16, 2024. #CollabSummit2024 is designed to provide cutting-edge insights and best practices into Power Platform, Microsoft 365, Teams, Viva, and so much more. There's a whole host of experts speakers across the three-day event, including the likes of Vesa Juvonen, Laurie Pottmeyer, Dan Holme, Mark Kashman, Dona Sarkar, Gavin Barron, Emily Mancini, Martina Grom, Ahmad Najjar, Liz Sundet, Nikki Chapple, Sara Fennah, Seb Matthews, Tobias Martin, Zoe Wilson, Fabian Williams, and many more.   Click the image below to find out more about #ECS2024 and register today!   Microsoft 365 & Power Platform Conference - Seattle - 3-7th June If you're looking to turbo boost your Power Platform skills this year, why not take a look at everything TechCon365 has to offer at the Seattle Convention Center on June 3-7, 2024.   This amazing 3-day conference (with 2 optional days of workshops) offers over 130 sessions across multiple tracks, alongside 25 workshops presented by Power Platform, Microsoft 365, Microsoft Teams, Viva, Azure, Copilot and AI experts. There's a great array of speakers, including the likes of Nirav Shah, Naomi Moneypenny, Jason Himmelstein, Heather Cook, Karuana Gatimu, Mark Kashman, Michelle Gilbert, Taiki Y., Kristi K., Nate Chamberlain, Julie Koesmarno, Daniel Glenn, Sarah Haase, Marc Windle, Amit Vasu, Joanne C Klein, Agnes Molnar, and many more.   Click the image below for more #Techcon365 intel and register today!   For more events, click the image below to visit the Microsoft Community Days website.    

Tuesday Tip | Update Your Community Profile Today!

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   We're excited to announce that updating your community profile has never been easier! Keeping your profile up to date is essential for staying connected and engaged with the community.   Check out the following Support Articles with these topics: Accessing Your Community ProfileRetrieving Your Profile URLUpdating Your Community Profile Time ZoneChanging Your Community Profile Picture (Avatar)Setting Your Date Display Preferences Click on your community link for more information: Power Apps, Power Automate, Power Pages, Copilot Studio   Thank you for being an active part of our community. Your contributions make a difference! Best Regards, The Community Management Team

Top Solution Authors
Top Kudoed Authors
Users online (4,190)