cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Not all operators working

Hello there!

My code gives 0 errors but there is something wrong... there might be ; wrongly placed or too many. Is anyone able to check my code and let me know? 

 

ClearCollect(
    colUrenRegistratie;
    Filter(
        UrenRegistratie;
        Datum = DataCardValue9.Text
        && varcurrentuser = DataCardValue10.Text
    )
);;

Set(
    sumTijdTotaal;
    Sum(
        colUrenRegistratie;
        Text(TijdTotaal)
    )
);;

If(varcurrentuser = "John Stollé";
Set(
    remainder;
    9,75 - Mod(
        Value(sumTijdTotaal);
        9,75
    )
);;

If(Weekday(
    Date(
        Value(Right(DataCardValue9.Text;4));
        Value(Mid(DataCardValue9.Text;4;2));
        Value(Left(DataCardValue9.Text;2))
    )
) = 6 && varcurrentuser <> "John Stollé"; Set(
    remainder;
    7 - Mod(
        Value(sumTijdTotaal);
        7
    )
);; 

Set(
    remainder;
    8 - Mod(
        Value(sumTijdTotaal);
        8
    )
)));;


Set(varTijdTotaal; 
    Value(EditForm1.Updates.TijdTotaal) 
    - remainder
);;


If(
    Value(DataCardValue11.Text) <= remainder;
    SubmitForm(EditForm1);
    
    If(
        !EditForm1.Valid;
        Notify(
            "Een of meer velden zijn niet correct ingevuld.";
            NotificationType.Error
        );
        Patch(
            UrenRegistratie;
            Defaults(UrenRegistratie);
            EditForm1.Updates;
            {TijdTotaal: remainder}
        );;
        Patch(
            UrenRegistratie;
            Defaults(UrenRegistratie);
            EditForm1.Updates;
            {TijdTotaal: varTijdTotaal}
        );;
        ResetForm(EditForm1);;
        Navigate([@Overzicht]; Fade);;
        If(
            !IsEmpty(Errors(UrenRegistratie));
            Notify(
                "Er is een fout bij het versturen van het format, hierdoor zijn niet alle rijen succesvol verzonden.";
                NotificationType.Error
            );;
            ResetForm(EditForm1);;
            Navigate(
                [@Overzicht];
                Fade
            )
        )
    )
)

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
iAm_ManCat
Most Valuable Professional
Most Valuable Professional

From what I can see your code doesn't check if the total hours is >7 or >8 it is just mod'ing them regardless of how large the total time is. I've also updated the patch to check if the remainder is actually >0, if not then don't patch it as it will be a blank entry?

 

 

ClearCollect(
    colUrenRegistratie;
    Filter(
        UrenRegistratie;
        Datum = 
            DataCardValue9.Text
         And varcurrentuser = Werknemer
    )
);;

Set(
    sumTijdTotaal;
    Sum(
        colUrenRegistratie;
        Text(TijdTotaal)
    )
);;

If(
   //If current use is John
   varcurrentuser = "John Stollé";
   
   //If total is >9.75 then mod otherwise dont mod
   If(
       sumTijdTotaal>9,75;
       Set( remainder; 9,75 - Mod( Value(sumTijdTotaal); 9,75 );
       Set( remainder; 0)

       )
   )
   ;
   //Otherwise if user is not John
   // AND if Weekday is 6
   If(
      Weekday(
         Date(
            Value(Right(DataCardValue9.Text;4));
            Value(Mid(DataCardValue9.Text;4;2));
            Value(Left(DataCardValue9.Text;2))
         )
      ) = 6
      ;
      // then set remainder mod7
      //If total is >7 then mod otherwise dont mod
      If(
         sumTijdTotaal>7;
         Set( remainder; 7 - Mod( Value(sumTijdTotaal); 7 );
         Set( remainder; 0 )
      )
      ;
      //otherwise set remainder mod 8
      //If total is >8 then mod otherwise dont mod
      If(
         sumTijdTotaal>7;
         Set( remainder; 8 - Mod( Value(sumTijdTotaal); 8 );
         Set( remainder; 0 );
   )
);;

Set(varTijdTotaal; 
    sumTijdTotaal - remainder
);;


If(
    Value(DataCardValue11.Text) <= remainder;
    SubmitForm(EditForm1);
    
    If(
        !EditForm1.Valid;
        Notify(
            "Een of meer velden zijn niet correct ingevuld.";
            NotificationType.Error
        );
        //If Remainder is >0 then patch the reaminder otherwise don't create two entries
        If(
           remainder>0;
           Patch(
               UrenRegistratie;
               Defaults(UrenRegistratie);
               EditForm1.Updates;
               {TijdTotaal: remainder}
           )
        );;
        Patch(
            UrenRegistratie;
            Defaults(UrenRegistratie);
            EditForm1.Updates;
            {TijdTotaal: varTijdTotaal}
        );;
        ResetForm(EditForm1);;
        Navigate([@Overzicht]; Fade);;
        If(
            !IsEmpty(Errors(UrenRegistratie));
            Notify(
                "Er is een fout bij het versturen van het format, hierdoor zijn niet alle rijen succesvol verzonden.";
                NotificationType.Error
            );;
            ResetForm(EditForm1);;
            Navigate(
                [@Overzicht];
                Fade
            )
        )
    )
)

 

 


@iAm_ManCat
My blog


Please 'Mark as Solution' if someone's post answered your question and always 'Thumbs Up' the posts you like or that helped you!


Thanks!
You and everyone else in the community make it the awesome and welcoming place it is, keep your questions coming and make sure to 'like' anything that makes you 'Appy
Sancho Harker, MVP


View solution in original post

8 REPLIES 8
mdevaney
Super User
Super User

@Anonymous
You said 'something went wrong' with your code.  Could you please let the forums know what went wrong?  It will help us solve your problem.

 

Also, it is a best practice that any code written after the SubmitForm function should go either in the OnSuccess or OnFailure property of the form.

 

---
Please click "Accept as Solution" if my post answered your question so that others may find it more quickly. If you found this post helpful consider giving it a "Thumbs Up."

iAm_ManCat
Most Valuable Professional
Most Valuable Professional

I think it's this part:

        Set(
            remainder;
            7 - Mod(
                Value(sumTijdTotaal);
                7
                )
        );; 

        Set(
            remainder;
            8 - Mod(
                Value(sumTijdTotaal);
                8
            )
        )

You're checking if weekday and user <> and if yes then you are doing 7-mod, but then you have a double ;; so you are also doing 8-mod (instead of doing it when not weekday).

 

Also this part:

//if form valid then patch
        Patch(
            UrenRegistratie;
            Defaults(UrenRegistratie);
            EditForm1.Updates;
            {TijdTotaal: remainder}
        );;
        //AND patch this?
        Patch(
            UrenRegistratie;
            Defaults(UrenRegistratie);
            EditForm1.Updates;
            {TijdTotaal: varTijdTotaal}
        );;

You are saying with the ;; that both of these are running one after the other, so when your form is valid it first patches the updates from the form and changes the TijdTotaal value to remainder, then it immediately afterwards patches that same Updates and changes TijdTotaal to varTijdTotaal?

 

Also this bit:

        //Reset form and navigate away
        ResetForm(EditForm1);;
        Navigate([@Overzicht]; Fade);;

        // This point is never reached as it has already reset and navigated!
        If(
            !IsEmpty(Errors(UrenRegistratie));
            Notify(
                "Er is een fout bij het versturen van het format, hierdoor zijn niet alle rijen succesvol verzonden.";
                NotificationType.Error
            );;
            ResetForm(EditForm1);;
            Navigate(
                [@Overzicht];
                Fade
            )
        )

You should move the check for errors up and get rid of the first reset/nav as they will happen anyway if there are no errors.

 

So code should end up something like:

ClearCollect(
    colUrenRegistratie;
    Filter(
        UrenRegistratie;
        Datum = DataCardValue9.Text
        && varcurrentuser = DataCardValue10.Text
    )
);;

Set(
    sumTijdTotaal;
    Sum(
        colUrenRegistratie;
        Text(TijdTotaal)
    )
);;

If(varcurrentuser = "John Stollé";
    Set(
        remainder;
        9,75 - Mod(
            Value(sumTijdTotaal);
            9,75
        )
    );;

    If(
        Weekday(
            Date(
                Value(Right(DataCardValue9.Text;4));
                Value(Mid(DataCardValue9.Text;4;2));
                Value(Left(DataCardValue9.Text;2))
            )
        ) = 6 && varcurrentuser <> "John Stollé"
        ;
        Set(
            remainder;
            7 - Mod(
                Value(sumTijdTotaal);
                7
                )
        );

        Set(
            remainder;
            8 - Mod(
                Value(sumTijdTotaal);
                8
            )
        )
    )
);;


Set(varTijdTotaal; 
    Value(EditForm1.Updates.TijdTotaal) 
    - remainder
);;


If(
    Value(DataCardValue11.Text) <= remainder;
    
    //Then submit
    SubmitForm(EditForm1);
    
    //Otherwise do:
    If(
        //If form is not valid then notify
        !EditForm1.Valid;
        Notify(
            "Een of meer velden zijn niet correct ingevuld.";
            NotificationType.Error
        );
        
        ///////////////////////////////////
        //
        // Not sure what to do here, but 
        // having two of the same patch run 
        // seems counterintuitive
        //
        // If form valid then patch
        Patch(
            UrenRegistratie;
            Defaults(UrenRegistratie);
            EditForm1.Updates;
            {TijdTotaal: remainder}
        );;
        // AND patch this?
        Patch(
            UrenRegistratie;
            Defaults(UrenRegistratie);
            EditForm1.Updates;
            {TijdTotaal: varTijdTotaal}
        );;
        If(
            !IsEmpty(Errors(UrenRegistratie));
            Notify(
                "Er is een fout bij het versturen van het format, hierdoor zijn niet alle rijen succesvol verzonden.";
                NotificationType.Error
            );;
            ResetForm(EditForm1);;
            Navigate(
                [@Overzicht];
                Fade
            )
        )        
    )
)

 

Not sure if that will work as there's still an issue with the two patches, but its a step in the right direction I think


@iAm_ManCat
My blog


Please 'Mark as Solution' if someone's post answered your question and always 'Thumbs Up' the posts you like or that helped you!


Thanks!
You and everyone else in the community make it the awesome and welcoming place it is, keep your questions coming and make sure to 'like' anything that makes you 'Appy
Sancho Harker, MVP


Anonymous
Not applicable

Thank you for your answers. @iAm_ManCat @mdevaney 

It was working last week so I just went back to another version, what fixed it. The part of the patch was correct, it needs to patch it twice 😄


@Anonymous 

If you found a solution please accept an answer.  Otherwise people will think your forums question is still not solved.

Anonymous
Not applicable

Hello there! There is something strange going on with my app. On the start of my application I have the following code to get their full name of Office. 

Set(
    varcurrentuser; 
    User().FullName
);;

Whenever they fill in a ticket, their fullname is saved in a column named "Werknemer". The code down below makes a collection of the users worked hours on the date they filled in a textbox. If the TijdTotaal is higher than 8 it creates an extra ticket with the remaining hours. Whenever it is friday, this is being done after 7 hours instead of 8. Whenever John Stolle logs in, it will be after 9,75 hours. Whenever I fill in the ticket, it works completely fine. Whenever another customer fills in the tickets, the following happends; He makes a ticket with 1 hour, this ticket already gets split up into 2 tickets somehow. He later creates another ticket with 8,5 hours and this one also get splitted. This is what was supposed to happen; 28/09/2020 was a on monday so the ticket should have been split after 8 hours.

He creates a ticket with 1 hour, the ticket gets submitted. He then creates a ticket with 8,5 hours. This ticket gets split up. Since the first ticket was 1 hour, the second one should be 7 hours and then the third ticket will be the remaining hours, 1,5 hours. This is working for me fine, but not for the other user. What could be causing this to happen? @mdevaney @iAm_ManCat 

Database; https://gyazo.com/fd7332a46e141754a0cbfa1be162730f

ClearCollect(
    colUrenRegistratie;
    Filter(
        UrenRegistratie;
        Datum = 
            DataCardValue9.Text
         And varcurrentuser = Werknemer
    )
);;

Set(
    sumTijdTotaal;
    Sum(
        colUrenRegistratie;
        Text(TijdTotaal)
    )
);;

If(varcurrentuser = "John Stollé";
Set(
    remainder;
    9,75 - Mod(
        Value(sumTijdTotaal);
        9,75
    )
);

If(Weekday(
    Date(
        Value(Right(DataCardValue9.Text;4));
        Value(Mid(DataCardValue9.Text;4;2));
        Value(Left(DataCardValue9.Text;2))
    )
) = 6 && varcurrentuser <> "John Stollé"; Set(
    remainder;
    7 - Mod(
        Value(sumTijdTotaal);
        7
    )
);;; Set(
    remainder;
    8 - Mod(
        Value(sumTijdTotaal);
        8
    )
)));;


Set(varTijdTotaal; 
    Value(EditForm1.Updates.TijdTotaal) 
    - remainder
);;


If(
    Value(DataCardValue11.Text) <= remainder;
    SubmitForm(EditForm1);
    
    If(
        !EditForm1.Valid;
        Notify(
            "Een of meer velden zijn niet correct ingevuld.";
            NotificationType.Error
        );
        Patch(
            UrenRegistratie;
            Defaults(UrenRegistratie);
            EditForm1.Updates;
            {TijdTotaal: remainder}
        );;
        Patch(
            UrenRegistratie;
            Defaults(UrenRegistratie);
            EditForm1.Updates;
            {TijdTotaal: varTijdTotaal}
        );;
        ResetForm(EditForm1);;
        Navigate([@Overzicht]; Fade);;
        If(
            !IsEmpty(Errors(UrenRegistratie));
            Notify(
                "Er is een fout bij het versturen van het format, hierdoor zijn niet alle rijen succesvol verzonden.";
                NotificationType.Error
            );;
            ResetForm(EditForm1);;
            Navigate(
                [@Overzicht];
                Fade
            )
        )
    )
)

 

iAm_ManCat
Most Valuable Professional
Most Valuable Professional

From what I can see your code doesn't check if the total hours is >7 or >8 it is just mod'ing them regardless of how large the total time is. I've also updated the patch to check if the remainder is actually >0, if not then don't patch it as it will be a blank entry?

 

 

ClearCollect(
    colUrenRegistratie;
    Filter(
        UrenRegistratie;
        Datum = 
            DataCardValue9.Text
         And varcurrentuser = Werknemer
    )
);;

Set(
    sumTijdTotaal;
    Sum(
        colUrenRegistratie;
        Text(TijdTotaal)
    )
);;

If(
   //If current use is John
   varcurrentuser = "John Stollé";
   
   //If total is >9.75 then mod otherwise dont mod
   If(
       sumTijdTotaal>9,75;
       Set( remainder; 9,75 - Mod( Value(sumTijdTotaal); 9,75 );
       Set( remainder; 0)

       )
   )
   ;
   //Otherwise if user is not John
   // AND if Weekday is 6
   If(
      Weekday(
         Date(
            Value(Right(DataCardValue9.Text;4));
            Value(Mid(DataCardValue9.Text;4;2));
            Value(Left(DataCardValue9.Text;2))
         )
      ) = 6
      ;
      // then set remainder mod7
      //If total is >7 then mod otherwise dont mod
      If(
         sumTijdTotaal>7;
         Set( remainder; 7 - Mod( Value(sumTijdTotaal); 7 );
         Set( remainder; 0 )
      )
      ;
      //otherwise set remainder mod 8
      //If total is >8 then mod otherwise dont mod
      If(
         sumTijdTotaal>7;
         Set( remainder; 8 - Mod( Value(sumTijdTotaal); 8 );
         Set( remainder; 0 );
   )
);;

Set(varTijdTotaal; 
    sumTijdTotaal - remainder
);;


If(
    Value(DataCardValue11.Text) <= remainder;
    SubmitForm(EditForm1);
    
    If(
        !EditForm1.Valid;
        Notify(
            "Een of meer velden zijn niet correct ingevuld.";
            NotificationType.Error
        );
        //If Remainder is >0 then patch the reaminder otherwise don't create two entries
        If(
           remainder>0;
           Patch(
               UrenRegistratie;
               Defaults(UrenRegistratie);
               EditForm1.Updates;
               {TijdTotaal: remainder}
           )
        );;
        Patch(
            UrenRegistratie;
            Defaults(UrenRegistratie);
            EditForm1.Updates;
            {TijdTotaal: varTijdTotaal}
        );;
        ResetForm(EditForm1);;
        Navigate([@Overzicht]; Fade);;
        If(
            !IsEmpty(Errors(UrenRegistratie));
            Notify(
                "Er is een fout bij het versturen van het format, hierdoor zijn niet alle rijen succesvol verzonden.";
                NotificationType.Error
            );;
            ResetForm(EditForm1);;
            Navigate(
                [@Overzicht];
                Fade
            )
        )
    )
)

 

 


@iAm_ManCat
My blog


Please 'Mark as Solution' if someone's post answered your question and always 'Thumbs Up' the posts you like or that helped you!


Thanks!
You and everyone else in the community make it the awesome and welcoming place it is, keep your questions coming and make sure to 'like' anything that makes you 'Appy
Sancho Harker, MVP


Anonymous
Not applicable

Thank you for your fast answer, I really appreciate that! @iAm_ManCat 

We still need to check what user is logged in. That's what the collection was for. If for example I have 2 employees. Named Timo and Peter. 

If Timo submits a ticket of 4 hours on the date of the value of 

DataCardValue9.Text

 This is a date value. For example 29/09/2020. 

If Peter then submits a ticket of 5 hours. It should not be split up. It needs to look if the current user has a total of 8 hours on the dayvalue of 

DataCardValue9.Text

 Hope I explained this clear enough. 

iAm_ManCat
Most Valuable Professional
Most Valuable Professional

Hi,

 

Sorry, I wasn't saying to remove the code above that If( - that code is fine, I was just focusing on the code below, I update my previous post.

 

Cheers,

Sancho


@iAm_ManCat
My blog


Please 'Mark as Solution' if someone's post answered your question and always 'Thumbs Up' the posts you like or that helped you!


Thanks!
You and everyone else in the community make it the awesome and welcoming place it is, keep your questions coming and make sure to 'like' anything that makes you 'Appy
Sancho Harker, MVP


Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

  It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd. at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3rd, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!       Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪🌠

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

March User Group Update: New Groups and Upcoming Events!

  Welcome to this month’s celebration of our Community User Groups and exciting User Group events. We’re thrilled to introduce some brand-new user groups that have recently joined our vibrant community. Plus, we’ve got a lineup of engaging events you won’t want to miss. Let’s jump right in: New User Groups   Sacramento Power Platform GroupANZ Power Platform COE User GroupPower Platform MongoliaPower Platform User Group OmanPower Platform User Group Delta StateMid Michigan Power Platform Upcoming Events  DUG4MFG - Quarterly Meetup - Microsoft Demand PlanningDate: 19 Mar 2024 | 10:30 AM to 12:30 PM Central America Standard TimeDescription: Dive into the world of manufacturing with a focus on Demand Planning. Learn from industry experts and share your insights. Dynamics User Group HoustonDate: 07 Mar 2024 | 11:00 AM to 01:00 PM Central America Standard TimeDescription: Houston, get ready for an immersive session on Dynamics 365 and the Power Platform. Connect with fellow professionals and expand your knowledge. Reading Dynamics 365 & Power Platform User Group (Q1)Date: 05 Mar 2024 | 06:00 PM to 09:00 PM GMT Standard TimeDescription: Join our virtual meetup for insightful discussions, demos, and community updates. Let’s kick off Q1 with a bang! Leaders, Create Your Events!    Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you!

Top Solution Authors
Top Kudoed Authors
Users online (5,868)