cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Jose1
Advocate II
Advocate II

Patch a Gallery and DropDown Values

Hello everyone,

 

(I'm currently patching to Excel; however, once I'm done testing, I'm going to link to Azure.) 

 

I'm currently working on a app that functions like a checklist. The following is what I'm trying to accomplish:

 

- A user selects a value from a dropdown which filters a gallery. On the gallery, each record has a corresponding dropdown. The user selects the corresponding values for each client and submits. Upon submit, the records on the gallery along with the corresponding drop down values are patched to a table.

 

If this is not possible, what other route can I take?

 

The following is a screenshot of the layout, minus any aesthetics.

 

screenshot.PNG

1 ACCEPTED SOLUTION

Accepted Solutions

I was able to figure it out. I used the following formula:

 

ForAll(Gallery.AllItems, Patch(MealTime, Defaults(MealTime), {location: location, client_name: client_name, ate: Ate.Selected.Value}))

 

All the clients in the gallery along with their corresponding location and drop down value were patched.

 

 

regards,

View solution in original post

18 REPLIES 18

Hi please try the following:

 

Create a button for submitting the data and set the the OnSelect property to

 

Patch(TableName,Defaults(TableName),{ColumName:Nameofdropdown.Selected.Value})

 

Please note the parts in bold above are where you will need to add your own info

 

I hope this helps

 

Scott

Hello,

 

Thank you for responding! I tried it but it only patched one record and only the value from the drop down.

 

The table I'm patching to is called "MealTime." This table has three columns:

- location

- client_name

- ate

 

The gallery is referncing another table which has two columns:

- location

- client_name

 

On this gallery, I have a dropdown called "Ate." I want to patch "MealTime" with all the records in the gallery and the corresponding Ate value.

 

I want to patch multiple records, each will have a location, client name, and whether they ate.

Hi,

 

You will need to patch each dropdown box value to a column within your data source

 

 

Patch(MealTime,Defaults(Mealtime),{location:Dropdown5.Selected.Value, client_name:Dropdown6.Selected.Value,ate:Dropdown7.Selected.Value})

 

 

You can add more drop downs if you need to the above

 

If you need anymore help ill try my best to help further

 

Scott

I tried the following:

 

Partch(MealTime, Defaults(MealTime), {location: Gallery3.Selected.location, client_name: Gallery3.Selected.client_name, ate: Ate.Selected.Value})

 

It is only patching whichever record I click on the gallery prior to submitting. I would like it to patch all the records being displayed on the gallery.

 

I appreciate you taking the time.

I was able to figure it out. I used the following formula:

 

ForAll(Gallery.AllItems, Patch(MealTime, Defaults(MealTime), {location: location, client_name: client_name, ate: Ate.Selected.Value}))

 

All the clients in the gallery along with their corresponding location and drop down value were patched.

 

 

regards,

Can a combination of label and toggle values be used as well?

Patch('Extinguisher List',Defaults('Extinguisher List'),{Date:Label1.Value,Pass:Toggle1.Selected.Value,Label2:User})

 

I am trying to create a field check for the extiguishers and all I want to update in the record is user, date, and pass or fail. May get more advanced once I get this going.

 

Chris West

Can you provide a screenshot, so I can get a better idea of what you are trying to accomplish.

Anonymous
Not applicable

Hi, 

 

I have several screens displaying data from one table, they are just filtered versions of the table compared to different categories. I have only one details and one submit page. I have directed all the form screens to that details page and submit page through use of variable. I have datepicker on my submit page. I have a column for users to enter a date (I didnt want them to enter date in freetext format since there would be format differences from user to user, so I put datepicker instead). On the submit form icon I have put a patch function like this: Patch(ALLINONE,BrowseGallery3_ALL.Selected,{ACTUAL_DATE: DatePicker19ss.SelectedDate})

But user may end up in that submit page from different galleries so Instead of BrowseGallery3.Selected it should be for all galleries. How can I do that? 

Thanks, 

Anonymous
Not applicable

Hi!
this formula is work with me in case the same data source is using in the gallery,but can you please help me to patch the data to different Datasource than which used by the gallery, or is there is any way to make the gallery use multiple data sources,so when I click the button will patch the data to another data source 

Patch('Work Inputs', Defaults('Work Inputs'),
{wbc_starttime:StartTime,wbc_endtime:Now(),wbc_name:"Testing B ",wbc_duration:DateDiff( StartTime, Now(), Minutes )} ,
{wbc_workinputstatus:'Work Input Status'.Working});
gallery datasource name :Ticket,but i want patch data to work input datasource when i click End button to calculate the time 

Thank you for your effort,Appreciate it 🙂

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Results posted on July 24th

We are excited to announce the Summer of Solutions Challenge!   This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions in the Forums to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersNumber of SolutionsSuper UsersNumber of Solutions @anandm08  23 @WarrenBelz  31 @DBO_DV  10 @Amik  19 AmínAA 6 @mmbr1606  12 @rzuber  4 @happyume  7 @Giraldoj  3@ANB 6 (tie)   @SpongYe  6 (tie)     Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersSolutionsSuper UsersSolutions @anandm08  10@WarrenBelz 25 @DBO_DV  6@mmbr1606 14 @AmínAA 4 @Amik  12 @royg  3 @ANB  10 @AllanDeCastro  2 @SunilPashikanti  5 @Michaelfp  2 @FLMike  5 @eduardo_izzo  2   Meekou 2   @rzuber  2   @Velegandla  2     @PowerPlatform-P  2   @Micaiah  2     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Week 3:Community MembersSolutionsSuper UsersSolutionsPower Apps anandm0861WarrenBelz86DBO_DV25Amik66Michaelfp13mmbr160647Giraldoj13FLMike31AmínAA13SpongYe27     Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Week 4:Community MembersSolutionsSuper UsersSolutionsPower Apps DBO-DV21WarranBelz26Giraldoj7mmbr160618Muzammmil_0695067Amik14samfawzi_acml6FLMike12tzuber6ANB8   SunilPashikanti8

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Top Solution Authors
Top Kudoed Authors
Users online (3,813)