cancel
Showing results for 
Search instead for 
Did you mean: 
Reply

Scrolling an image

Hi all,


I have what might be a simple question on image scrolling, but I have tried a number of approaches and can't get it working the way I would like.

I have a screen with a resolution of 640x1136. On this screen I place an image of 1900x900. The idea is that the user can swipe on the screen to scroll across the image. What I have tried ...

- Use a horizontal gallery, setting the width of the gallery to >1900, and the item within the gallery of a similar width. Doesn't work. The part of the image which is currently visible on screen (the initial 640 pixels) is repeated as I scroll.  So the image appears corrupted. Scrolls beautifully though 🙂

If I limit the gallery to a single item (FirstN(gallery,1), i can see the full image in the power apps editor (not corrupted), but it doesn't scroll (even thought the item width is > 640).

Is it possible to have a horizontal gallery item width > screen width?

- Segment the image into smaller widths, and use a horizontal gallery, with each segmented part of the image placed in a separate item (of less than 640 pixels) within the gallery. Works, but alignment will be an issue as the final app has scale to fit enabled and the layout is slightly different on different devices as a result.

- Use an invisible slider control above the image, and tie the image X position to the slider value.  Works, but it has two drawbacks.

1.  Scroll is too fast, as I'm scrolling an image which is three times the width of the screen, using a slider control just under a single screen width

 

2. If the user touches the screen, they adjust the slider position and the image position 'jumps' as the image X position is tied to the slider value.

Ideally i want to measure the amount the slider has moved, and link that value to the Image X position, rather than the actual slider position.

I can set a variable to the initial slider value using the OnSelect property of the slider, then subtracting the current slider value from this initial value, I have the distance the slider moves. Great! But to support multiple swipes across the image, I need a running count of the total distance moved by the slider across multiple adjustments of the slider position, and this is where I am stuck.

I can use the OnChange property of the slider to update a variable with the total distance the slider has moved, but this only updates when the slider is released, but I need this variable updated as the slider is being moved.

 

Any ideas?

1 ACCEPTED SOLUTION

Accepted Solutions

Ok, again for the benefit of anyone coming here in future. The best way to do this ... 

Insert a vertical container. Set the horizontal Overflow property to Scroll. Set the width to the width of your image.

Inside this container, insert a vertical gallery. Again, set the width as the width of your image. Set the number of items in the gallery to 1 by setting the items property to FirstN(CustomGallerySample,1).

Inside the gallery insert your image, and set the width/height you need (width should match that of the gallery/container)

Now, when using the phone, you can scroll across your image horizontally using standard swipe gestures and as this is in a gallery, you get rubber banding and 60Hz animations of the horizonal movement. 

This is the solution I needed from the start 😉

View solution in original post

8 REPLIES 8

hi @Jasondefaoite here is an idea, it does not give you precisely what you want but may get you in the right direction.

 

set the image width to 1900 this will make the image go out of view. add two icons on the left and right of the screen and to scroll left set the left icon OnSelect to Set(_X,Image5.X-50) , right OnSelect = Set(_X,Image5.X+50) and two others  for up OnSelect = Set(_Y,Image5.Y-50) and down Set(_Y,Image5.Y + 50)  . On the image set the X to _X and the Y to _Y. now you can scroll the image. 

 

Image "Zoomed"

rubin_boer_0-1614947492512.png

 

Select scrolling up

rubin_boer_2-1614947599343.png

 

 

 

Hope this helps

 
hey there if you liked the post give it a thumbs up, and if it solved your question please accept it as a solution.

First, thank you for taking the time to reply. I actually have tap to move the image already working. However I could see a number of initial users trying to swipe across the image to move it rather than tapping, given their experience with how most native iOS/Android apps work.

I wanted to replace this tap to move with a swipe gesture.

it would be great. upvote the idea and it will def get a mention at the super user meeting A Control element that returns X and Y coordinates... - Power Platform Community (microsoft.com) 😉

hey there if you liked the post give it a thumbs up, and if it solved your question please accept it as a solution.

Thanks Rubin, upvoted.

I managed to get it working. Solution for reference, I needed to add a timer.

 

Slider onSelect sets initialPositionVariable = Slider.Value. It also sets variableStartTimer = true.
Slider onChange sets the variableStartTimer = false.

Add a timer with a duration of 10, with a start of varibleStartTimer and repeat of varibleStartTimer

 

So far, when we select/touch the slider, the timer starts/repeats until we release the slider. Also with the initial selection of the slider, initialPositionVariable - Slider.Value = 0, and if we move the slider in either direction, initialPositionVariable - Slider.Value will give us the delta.

Finally, we can set the timer's onTimerEnd to set myXvalue = myXvalue - (initialPositionVariable - Slider.Value)
So myXvalue is updated every time the timer loops, adding the delta position to it. 

Tie the image X position to myXvalue. 
Make the slider the size of the screen, and the handle size ~ 600 and make all colors transparent.

If you then swipe right to left on the screen, the image moves left to right.

thats pretty cool 🙂

 
hey there if you liked the post give it a thumbs up, and if it solved your question please accept it as a solution.

Cheers. One correction, the minimum timer value appears to be 50ms. This equates to being able to update the image position 20 times a second, or 20Hz. Ideally it should be updating at 60Hz. But it works!

Ok, again for the benefit of anyone coming here in future. The best way to do this ... 

Insert a vertical container. Set the horizontal Overflow property to Scroll. Set the width to the width of your image.

Inside this container, insert a vertical gallery. Again, set the width as the width of your image. Set the number of items in the gallery to 1 by setting the items property to FirstN(CustomGallerySample,1).

Inside the gallery insert your image, and set the width/height you need (width should match that of the gallery/container)

Now, when using the phone, you can scroll across your image horizontally using standard swipe gestures and as this is in a gallery, you get rubber banding and 60Hz animations of the horizonal movement. 

This is the solution I needed from the start 😉

Hi
are you able to share some screenshots of each step?
That would be awesome.

Thank you

Cheers

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!   This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions in the Forums to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersNumber of SolutionsSuper UsersNumber of Solutions @anandm08  23 @WarrenBelz  31 @DBO_DV  10 @Amik  19 AmínAA 6 @mmbr1606  12 @rzuber  4 @happyume  7 @Giraldoj  3@ANB 6 (tie)   @SpongYe  6 (tie)     Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersSolutionsSuper UsersSolutions @anandm08  10@WarrenBelz 25 @DBO_DV  6@mmbr1606 14 @AmínAA 4 @Amik  12 @royg  3 @ANB  10 @AllanDeCastro  2 @SunilPashikanti  5 @Michaelfp  2 @FLMike  5 @eduardo_izzo  2   Meekou 2   @rzuber  2   @Velegandla  2     @PowerPlatform-P  2   @Micaiah  2     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Week 3:Community MembersSolutionsSuper UsersSolutionsPower Apps anandm0861WarrenBelz86DBO_DV25Amik66Michaelfp13mmbr160647Giraldoj13FLMike31AmínAA13SpongYe27     Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Week 4:Community MembersSolutionsSuper UsersSolutionsPower Apps DBO-DV21WarranBelz26Giraldoj7mmbr160618Muzammmil_0695067Amik14samfawzi_acml6FLMike12tzuber6ANB8   SunilPashikanti8

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Top Solution Authors
Top Kudoed Authors
Users online (2,027)