cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Jasondefaoite
Advocate II
Advocate II

Scrolling an image

Hi all,


I have what might be a simple question on image scrolling, but I have tried a number of approaches and can't get it working the way I would like.

I have a screen with a resolution of 640x1136. On this screen I place an image of 1900x900. The idea is that the user can swipe on the screen to scroll across the image. What I have tried ...

- Use a horizontal gallery, setting the width of the gallery to >1900, and the item within the gallery of a similar width. Doesn't work. The part of the image which is currently visible on screen (the initial 640 pixels) is repeated as I scroll.  So the image appears corrupted. Scrolls beautifully though 🙂

If I limit the gallery to a single item (FirstN(gallery,1), i can see the full image in the power apps editor (not corrupted), but it doesn't scroll (even thought the item width is > 640).

Is it possible to have a horizontal gallery item width > screen width?

- Segment the image into smaller widths, and use a horizontal gallery, with each segmented part of the image placed in a separate item (of less than 640 pixels) within the gallery. Works, but alignment will be an issue as the final app has scale to fit enabled and the layout is slightly different on different devices as a result.

- Use an invisible slider control above the image, and tie the image X position to the slider value.  Works, but it has two drawbacks.

1.  Scroll is too fast, as I'm scrolling an image which is three times the width of the screen, using a slider control just under a single screen width

 

2. If the user touches the screen, they adjust the slider position and the image position 'jumps' as the image X position is tied to the slider value.

Ideally i want to measure the amount the slider has moved, and link that value to the Image X position, rather than the actual slider position.

I can set a variable to the initial slider value using the OnSelect property of the slider, then subtracting the current slider value from this initial value, I have the distance the slider moves. Great! But to support multiple swipes across the image, I need a running count of the total distance moved by the slider across multiple adjustments of the slider position, and this is where I am stuck.

I can use the OnChange property of the slider to update a variable with the total distance the slider has moved, but this only updates when the slider is released, but I need this variable updated as the slider is being moved.

 

Any ideas?

1 ACCEPTED SOLUTION

Accepted Solutions
Jasondefaoite
Advocate II
Advocate II

Ok, again for the benefit of anyone coming here in future. The best way to do this ... 

Insert a vertical container. Set the horizontal Overflow property to Scroll. Set the width to the width of your image.

Inside this container, insert a vertical gallery. Again, set the width as the width of your image. Set the number of items in the gallery to 1 by setting the items property to FirstN(CustomGallerySample,1).

Inside the gallery insert your image, and set the width/height you need (width should match that of the gallery/container)

Now, when using the phone, you can scroll across your image horizontally using standard swipe gestures and as this is in a gallery, you get rubber banding and 60Hz animations of the horizonal movement. 

This is the solution I needed from the start 😉

View solution in original post

8 REPLIES 8
rubin_boer
Super User
Super User

hi @Jasondefaoite here is an idea, it does not give you precisely what you want but may get you in the right direction.

 

set the image width to 1900 this will make the image go out of view. add two icons on the left and right of the screen and to scroll left set the left icon OnSelect to Set(_X,Image5.X-50) , right OnSelect = Set(_X,Image5.X+50) and two others  for up OnSelect = Set(_Y,Image5.Y-50) and down Set(_Y,Image5.Y + 50)  . On the image set the X to _X and the Y to _Y. now you can scroll the image. 

 

Image "Zoomed"

rubin_boer_0-1614947492512.png

 

Select scrolling up

rubin_boer_2-1614947599343.png

 

 

 

Hope this helps

 
hey there if you liked the post give it a thumbs up, and if it solved your question please accept it as a solution.

First, thank you for taking the time to reply. I actually have tap to move the image already working. However I could see a number of initial users trying to swipe across the image to move it rather than tapping, given their experience with how most native iOS/Android apps work.

I wanted to replace this tap to move with a swipe gesture.

rubin_boer
Super User
Super User

it would be great. upvote the idea and it will def get a mention at the super user meeting A Control element that returns X and Y coordinates... - Power Platform Community (microsoft.com) 😉

hey there if you liked the post give it a thumbs up, and if it solved your question please accept it as a solution.

Thanks Rubin, upvoted.

I managed to get it working. Solution for reference, I needed to add a timer.

 

Slider onSelect sets initialPositionVariable = Slider.Value. It also sets variableStartTimer = true.
Slider onChange sets the variableStartTimer = false.

Add a timer with a duration of 10, with a start of varibleStartTimer and repeat of varibleStartTimer

 

So far, when we select/touch the slider, the timer starts/repeats until we release the slider. Also with the initial selection of the slider, initialPositionVariable - Slider.Value = 0, and if we move the slider in either direction, initialPositionVariable - Slider.Value will give us the delta.

Finally, we can set the timer's onTimerEnd to set myXvalue = myXvalue - (initialPositionVariable - Slider.Value)
So myXvalue is updated every time the timer loops, adding the delta position to it. 

Tie the image X position to myXvalue. 
Make the slider the size of the screen, and the handle size ~ 600 and make all colors transparent.

If you then swipe right to left on the screen, the image moves left to right.

rubin_boer
Super User
Super User

thats pretty cool 🙂

 
hey there if you liked the post give it a thumbs up, and if it solved your question please accept it as a solution.

Cheers. One correction, the minimum timer value appears to be 50ms. This equates to being able to update the image position 20 times a second, or 20Hz. Ideally it should be updating at 60Hz. But it works!

Jasondefaoite
Advocate II
Advocate II

Ok, again for the benefit of anyone coming here in future. The best way to do this ... 

Insert a vertical container. Set the horizontal Overflow property to Scroll. Set the width to the width of your image.

Inside this container, insert a vertical gallery. Again, set the width as the width of your image. Set the number of items in the gallery to 1 by setting the items property to FirstN(CustomGallerySample,1).

Inside the gallery insert your image, and set the width/height you need (width should match that of the gallery/container)

Now, when using the phone, you can scroll across your image horizontally using standard swipe gestures and as this is in a gallery, you get rubber banding and 60Hz animations of the horizonal movement. 

This is the solution I needed from the start 😉

Hi
are you able to share some screenshots of each step?
That would be awesome.

Thank you

Cheers

Helpful resources

Announcements

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip: Community User Groups

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: Community User Groups and YOU Being part of, starting, or leading a User Group can have many great benefits for our community members who want to learn, share, and connect with others who are interested in the Microsoft Power Platform and the low-code revolution.   When you are part of a User Group, you discover amazing connections, learn incredible things, and build your skills. Some User Groups work in the virtual space, but many meet in physical locations, meaning you have several options when it comes to building community with people who are learning and growing together!   Some of the benefits of our Community User Groups are: Network with like-minded peers and product experts, and get in front of potential employers and clients.Learn from industry experts and influencers and make your own solutions more successful.Access exclusive community space, resources, tools, and support from Microsoft.Collaborate on projects, share best practices, and empower each other. These are just a few of the reasons why our community members love their User Groups. Don't wait. Get involved with (or maybe even start) a User Group today--just follow the tips below to get started.For current or new User Group leaders, all the information you need is here: User Group Leader Get Started GuideOnce you've kicked off your User Group, find the resources you need:  Community User Group ExperienceHave questions about our Community User Groups? Let us know! We are here to help you!

Super User of the Month | Ahmed Salih

We're thrilled to announce that Ahmed Salih is our Super User of the Month for April 2024. Ahmed has been one of our most active Super Users this year--in fact, he kicked off the year in our Community with this great video reminder of why being a Super User has been so important to him!   Ahmed is the Senior Power Platform Architect at Saint Jude's Children's Research Hospital in Memphis. He's been a Super User for two seasons and is also a Microsoft MVP! He's celebrating his 3rd year being active in the Community--and he's received more than 500 kudos while authoring nearly 300 solutions. Ahmed's contributions to the Super User in Training program has been invaluable, with his most recent session with SUIT highlighting an incredible amount of best practices and tips that have helped him achieve his success.   Ahmed's infectious enthusiasm and boundless energy are a key reason why so many Community members appreciate how he brings his personality--and expertise--to every interaction. With all the solutions he provides, his willingness to help the Community learn more about Power Platform, and his sheer joy in life, we are pleased to celebrate Ahmed and all his contributions! You can find him in the Community and on LinkedIn. Congratulations, Ahmed--thank you for being a SUPER user!  

Top Solution Authors
Top Kudoed Authors
Users online (3,762)