cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Dorinda
Super User
Super User

StartScreen not working as expected or I got the syntax wrong

I am trying to use the new startscreen function and it is not working as I would expect

 

Here is what I have

If(
    Param(
        LookUp(
            'Apprentice List',
            'Apprentice Email'.Email = User().Email
        ).Position = "ELECTRONICS TECHNICIAN"
    ),
    'Dashboard by User_ElectronicsTech',
    If(
        Param("Hydro Electrican"),
        'Dashboard by User_ElectronicsTech',
        If(
            Param("Hydro Mechanic"),
            'Dashboard by User_HydroMechanic',
            If(
                Param("Lineman"),
                'Dashboard by User_Lineman',
                If(
                    Param("Meter Technician"),
                    'Dashboard by User_MeterTech',
                    If(
                        Param("Power Plant Operator"),
                        'Dashboard by User_PPO',
                        If(
                            Param("Power System Electrican"),
                            'Dashboard by User_PSE',
                            'Dashboard by User'
                        )
                    )
                )
            )
        )
    )
)

basically what I am wanting to have happen is I want to lookup the current user and if their position matches say ELECTRONICS TECHNICIAN navigate to the Dashboard by User_ElectronicsTech screen.  when I run the app it just is not going there, what am i missing?

1 ACCEPTED SOLUTION

Accepted Solutions
TheRobRush
Super User
Super User

Might try this, would look nice & clean, and I think it should give you what you are looking for.

 

 

Switch(
	LookUp(
            'Apprentice List',
            'Apprentice Email'.Email = User().Email,
	     Position
              ),
        "ELECTRONICS TECHNICIAN",
        'Dashboard by User_ElectronicsTech',
        "Hydro Electrican",
        'Dashboard by User_ElectronicsTech',
        "Hydro Mechanic",
        'Dashboard by User_HydroMechanic',
        "Lineman",
        'Dashboard by User_Lineman',
        "Meter Technician",
        'Dashboard by User_MeterTech',
        "Power Plant Operator",
        'Dashboard by User_PPO',
        "Power System Electrican",
        'Dashboard by User_PSE',
        'Dashboard by User'
      )

 

_____________________________________________________________________________________
Like my answer? - Hit that Thumbs Up. Resolved the Issue? - Hit Accept as Solution.
This helps others find solutions to future issues!

View solution in original post

14 REPLIES 14
TheRobRush
Super User
Super User

Just to check the silly stuff first have you tested the lookup in a Label first to make sure your formulas like 

LookUp(
            'Apprentice List',
            'Apprentice Email'.Email = User().Email
        ).Position

to make sure they are in fact returning the info (in exact same case usage) that you had expected them to return? Always a good place to start

_____________________________________________________________________________________
Like my answer? - Hit that Thumbs Up. Resolved the Issue? - Hit Accept as Solution.
This helps others find solutions to future issues!

@TheRobRush I have this same logic working elsewhere and it is returning the correct information, so I am looking to have the current user who logs in have it check the apprentice list and match the Position if it matches navigate to the correct screen.

 

Not sure whatelse you are wanting me to check?

TheRobRush
Super User
Super User

Ok so next question, I have only ever used Param in one way and its as follows.

 

If(Param("name")="ET",Set(viewMode,"ET"));

 

to do this I have to place &name=ET at the end of the url for the app when i type it into a browser, or add it to end of hyperlink. Is this Param being set in like a in app launch to another app? or how is their position title being put into this param in the app link?

_____________________________________________________________________________________
Like my answer? - Hit that Thumbs Up. Resolved the Issue? - Hit Accept as Solution.
This helps others find solutions to future issues!
Dorinda
Super User
Super User

@TheRobRush I do not want to do deep linking in that regard, what I am trying to do is check to see who is logged in do they match who is in the apprentice list and if so match the position to the person and navigate to that screen it works when I do it on the On Start which I may be going back to if I cannot get this to work.

TheRobRush
Super User
Super User

Yah, I get that,  but just asking, this formula is checking the value of your Param(), but where is it being set? Because if the Param() is being set in the OnStart, but checked in the StartScreen I am pretty sure it will miss the calculation. They switched to startscreen so you could have a screen displayed instead of nothing while onstart ran through all it's actions/calculations.

_____________________________________________________________________________________
Like my answer? - Hit that Thumbs Up. Resolved the Issue? - Hit Accept as Solution.
This helps others find solutions to future issues!

I am so lost on this, navigation is no longer an option on the Start Screen, i cant use global var on the start screen and I do not understand how this works, I thought I could use that code to check who the current user is and then navigate to the appropriate start screen I am not doing something right here because it is staying on the first screen no matter what I put on the Start Screen.

TheRobRush
Super User
Super User

Yah unless I am mistaken Param() will always be looking for a variable that has been set in the http: web link

 

I just tested startscreen for first time checking the User() data, which works  just fine for me if you can find a variable in User() that is suitable.

 

If(User().Email="EmailAddress@MyDomains.com",'Code Generator','Edit & Add Items to Inventory')
_____________________________________________________________________________________
Like my answer? - Hit that Thumbs Up. Resolved the Issue? - Hit Accept as Solution.
This helps others find solutions to future issues!

Well that is what I thought did in the first example doing a lookup on the current user. But that doesn’t seem to be working 

TheRobRush
Super User
Super User

No because in your example you said if Param(formula for lookup here)="Position" then, but Param() ios a value at the end of your web address ie ww.powerapps.com/myapp.htm&NAME=Rob 

where the Param(NAME="Rob") is passed to the app

_____________________________________________________________________________________
Like my answer? - Hit that Thumbs Up. Resolved the Issue? - Hit Accept as Solution.
This helps others find solutions to future issues!

Helpful resources

Announcements

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip: Community User Groups

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: Community User Groups and YOU Being part of, starting, or leading a User Group can have many great benefits for our community members who want to learn, share, and connect with others who are interested in the Microsoft Power Platform and the low-code revolution.   When you are part of a User Group, you discover amazing connections, learn incredible things, and build your skills. Some User Groups work in the virtual space, but many meet in physical locations, meaning you have several options when it comes to building community with people who are learning and growing together!   Some of the benefits of our Community User Groups are: Network with like-minded peers and product experts, and get in front of potential employers and clients.Learn from industry experts and influencers and make your own solutions more successful.Access exclusive community space, resources, tools, and support from Microsoft.Collaborate on projects, share best practices, and empower each other. These are just a few of the reasons why our community members love their User Groups. Don't wait. Get involved with (or maybe even start) a User Group today--just follow the tips below to get started.For current or new User Group leaders, all the information you need is here: User Group Leader Get Started GuideOnce you've kicked off your User Group, find the resources you need:  Community User Group ExperienceHave questions about our Community User Groups? Let us know! We are here to help you!

Super User of the Month | Ahmed Salih

We're thrilled to announce that Ahmed Salih is our Super User of the Month for April 2024. Ahmed has been one of our most active Super Users this year--in fact, he kicked off the year in our Community with this great video reminder of why being a Super User has been so important to him!   Ahmed is the Senior Power Platform Architect at Saint Jude's Children's Research Hospital in Memphis. He's been a Super User for two seasons and is also a Microsoft MVP! He's celebrating his 3rd year being active in the Community--and he's received more than 500 kudos while authoring nearly 300 solutions. Ahmed's contributions to the Super User in Training program has been invaluable, with his most recent session with SUIT highlighting an incredible amount of best practices and tips that have helped him achieve his success.   Ahmed's infectious enthusiasm and boundless energy are a key reason why so many Community members appreciate how he brings his personality--and expertise--to every interaction. With all the solutions he provides, his willingness to help the Community learn more about Power Platform, and his sheer joy in life, we are pleased to celebrate Ahmed and all his contributions! You can find him in the Community and on LinkedIn. Congratulations, Ahmed--thank you for being a SUPER user!  

Top Solution Authors
Top Kudoed Authors
Users online (4,391)