cancel
Showing results for
Did you mean:
Frequent Visitor

## Struggling with a formula

Hi all

Hoping someone can help me as I've been scratching my head!

I have created a formula but it is not working as expected. This is what I would like to happen.

If slider <= 15 then do slider*20.
If slider > 15 then keep slider*20 and any additional add 15.

Basically what I want is to move the slider and for any numbers below or matching 15 to be x20 and then if the slider is higher than 15 keep the 15x20 and then add 15 for each additional number.

E.G: 15*20 = 300 so if the number of the slider is 16 the total number should be 315, if the number on the slider is 17 the total should be 330 and so on.
However, I get 225 as its the whole slider now being X by 15.

Here is my code
Sum(If(NumberofUserSlider.Value > 15,NumberofUserSlider*15) + If(NumberofUserSlider.Value <= 15,NumberofUserSlider*20)

1 ACCEPTED SOLUTION

Accepted Solutions
Solution Sage

Hello can you try this code.

Add a Label and add the following code to its Text Property

If(NumberofUserSlider.Value <= 15, NumberofUserSlider.Value * 20,300 +((NumberofUserSlider.Value-15) *15))

Please click Accept as Solution if it resolved your problem or give it a Thumbs Up if it helped you in anyway this will allow other people to search correct solutions effectively.

Thanks,

Rahber

4 REPLIES 4
Community Champion

Here’s my thought on it.  Put this code inside the Text property of a label.

``If(NumberofUserSlider.Value <=15, NumberofUserSlider.Value*20, NumberofUserSlider.Value > 15, NumberofUserSlider.Value*20*15)``

---

Please click "Accept as Solution" if my post answered your question so that others may find it more quickly. If you found this post helpful consider giving it a "Thumbs Up."

Solution Sage

Hello can you try this code.

Add a Label and add the following code to its Text Property

If(NumberofUserSlider.Value <= 15, NumberofUserSlider.Value * 20,300 +((NumberofUserSlider.Value-15) *15))

Please click Accept as Solution if it resolved your problem or give it a Thumbs Up if it helped you in anyway this will allow other people to search correct solutions effectively.

Thanks,

Rahber

Community Champion

Try

If(NumberofUserSlider.Value > 15,
NumberofUserSlider*15 +
NumberofUserSlider.Value, If(NumberofUserSlider.Value <= 15,NumberofUserSlider*20))

------------

If you like this post, give a Thumbs up. Where it solved your request, Mark it as a Solution to enable other users find it.

Frequent Visitor

The issue is now resolved 🙂

using the following Sum(If(NumberofUserSlider.Value <= 15, NumberofUserSlider.Value * 20,300 +((NumberofUserSlider.Value-15) *15)))

Announcements

#### Announcing | Super Users - 2023 Season 1

Super Users – 2023 Season 1    We are excited to kick off the Power Users Super User Program for 2023 - Season 1.  The Power Platform Super Users have done an amazing job in keeping the Power Platform communities helpful, accurate and responsive. We would like to send these amazing folks a big THANK YOU for their efforts.      Super User Season 1 | Contributions July 1, 2022 – December 31, 2022  Super User Season 2 | Contributions January 1, 2023 – June 30, 2023    Curious what a Super User is? Super Users are especially active community members who are eager to help others with their community questions. There are 2 Super User seasons in a year, and we monitor the community for new potential Super Users at the end of each season. Super Users are recognized in the community with both a rank name and icon next to their username, and a seasonal badge on their profile.    Power Apps  Power Automate  Power Virtual Agents  Power Pages  Pstork1*  Pstork1*  Pstork1*  OliverRodrigues  BCBuizer  Expiscornovus*  Expiscornovus*  ragavanrajan  AhmedSalih  grantjenkins  renatoromao    Mira_Ghaly*  Mira_Ghaly*      Sundeep_Malik*  Sundeep_Malik*      SudeepGhatakNZ*  SudeepGhatakNZ*      StretchFredrik*  StretchFredrik*      365-Assist*  365-Assist*      cha_cha  ekarim2020      timl  Hardesh15      iAm_ManCat  annajhaveri      SebS  Rhiassuring      LaurensM  abm      TheRobRush  Ankesh_49      WiZey  lbendlin      Nogueira1306  Kaif_Siddique      victorcp  RobElliott      dpoggemann  srduval      SBax  CFernandes      Roverandom  schwibach      Akser  CraigStewart      PowerRanger  MichaelAnnis      subsguts  David_MA      EricRegnier  edgonzales      zmansuri  GeorgiosG      ChrisPiasecki  ryule      AmDev  fchopo      phipps0218  tom_riha      theapurva  takolota     Akash17  momlo     BCLS776  Shuvam-rpa     rampprakash  ScottShearer     Rusk  ChristianAbata     cchannon  Koen5     a33ik        AaronKnox        Matren        Alex_10        Jeff_Thorpe        poweractivate        Ramole        DianaBirkelbach        DavidZoon        AJ_Z        PriyankaGeethik        BrianS        StalinPonnusamy        HamidBee        CNT        Anonymous_Hippo        Anchov        KeithAtherton        alaabitar        Tolu_Victor        KRider        sperry1625        IPC_ahaas      zuurg    rubin_boer   cwebb365      If an * is at the end of a user's name this means they are a Multi Super User, in more than one community. Please note this is not the final list, as we are pending a few acceptances.  Once they are received the list will be updated.

#### Microsoft Power Platform Conference | Registration Open | Oct. 3-5 2023

We are so excited to see you for the Microsoft Power Platform Conference in Las Vegas October 3-5 2023! But first, let's take a look back at some fun moments and the best community in tech from MPPC 2022 in Orlando, Florida.   Featuring guest speakers such as Charles Lamanna, Heather Cook, Julie Strauss, Nirav Shah, Ryan Cunningham, Sangya Singh, Stephen Siciliano, Hugo Bernier and many more.   Register today: https://www.powerplatformconf.com/

#### Check out the new Power Platform Communities Front Door Experience!

We are excited to share the ‘Power Platform Communities Front Door’ experience with you!   Front Door brings together content from all the Power Platform communities into a single place for our community members, customers and low-code, no-code enthusiasts to learn, share and engage with peers, advocates, community program managers and our product team members. There are a host of features and new capabilities now available on Power Platform Communities Front Door to make content more discoverable for all power product community users which includes ForumsUser GroupsEventsCommunity highlightsCommunity by numbersLinks to all communities Users can see top discussions from across all the Power Platform communities and easily navigate to the latest or trending posts for further interaction. Additionally, they can filter to individual products as well.       Users can filter and browse the user group events from all power platform products with feature parity to existing community user group experience and added filtering capabilities.     Users can now explore user groups on the Power Platform Front Door landing page with capability to view all products in Power Platform.    Explore Power Platform Communities Front Door today. Visit Power Platform Community Front door to easily navigate to the different product communities, view a roll up of user groups, events and forums.