cancel
Showing results for 
Search instead for 
Did you mean: 
Reply

Submitting multiple forms to a single table

Hi there.

 

I currently have two pages on my app, each with a form with 10 user inputs named "form1" and "form2". I also have a onedrive data source. A Table named "table1" which is 20 cells wide. I want to be able to submit the forms so that they are both added to the same row on the table, so form1 would take up cells 1 - 10 and form  2 would take up cells 11 - 20.

 

I have attemped to use the patch fuction but i am unsure of the syntax. I need some code for onselect like submitform(form1) && submitform(form2) (probably completely wrong) so that the both save to the same row.

 

Could anyone please help? 

 

Many thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Hello @Toasteroven and @DOABrownie

The solution is to use the Patch() function, Submit will not easily be able to submit two forms at the same time to the same row of a table. (Unless you submit the first form, obtain the ID and then submit the second for as an edit to that ID.  Since I do not use forms at all I cannot personally recommend this approach)

I understand that you are unsure of syntax, so I am happy to help.

Here is a pseudocode example to create a new record with the 20 columns.

Patch(MyTable, Defaults(MyTable), {Column_A: Form1ControlA.Property, Column_B: Form1ControlB.Property, etc. etc. , Column_M: Form2ControlM.Property etc. etc.})

In order to determine the correct syntax for Form1ControlA.Property, I suggest you create a label in your app and set its Text property to the control value that you need for the first column and test it until you get the desired value.

 

Please let me know how you get on and we will resolve this.  However, as I say to everyone, if you need to customise forms you are often much better off abandoning the standard forms altogether and just using the individual controls.

View solution in original post

9 REPLIES 9

I am in a similar situation. i want to make mulitple forms and have the data that is collected in the forms addedd to the one Excell sheets so i can colect data from students and teachers and compare these resutls against a level that the students need to be at

 

I have found a potential solution where on the one excel document instead of having one table as a source i have two. So two tables of 10 cells. Then i link my first form with table one and my second form with table two. As they are writing to seperate tables it doesn't matter if one happens after the other, they will still be next to each other and look like they are in the same row.

 

However this would involve rewriting a whole bunch of stuff and i would really prefer not to do it if there is a simple function i can execute in an onslect button. If not then ill be doing this tomorrow.

Hello @Toasteroven and @DOABrownie

The solution is to use the Patch() function, Submit will not easily be able to submit two forms at the same time to the same row of a table. (Unless you submit the first form, obtain the ID and then submit the second for as an edit to that ID.  Since I do not use forms at all I cannot personally recommend this approach)

I understand that you are unsure of syntax, so I am happy to help.

Here is a pseudocode example to create a new record with the 20 columns.

Patch(MyTable, Defaults(MyTable), {Column_A: Form1ControlA.Property, Column_B: Form1ControlB.Property, etc. etc. , Column_M: Form2ControlM.Property etc. etc.})

In order to determine the correct syntax for Form1ControlA.Property, I suggest you create a label in your app and set its Text property to the control value that you need for the first column and test it until you get the desired value.

 

Please let me know how you get on and we will resolve this.  However, as I say to everyone, if you need to customise forms you are often much better off abandoning the standard forms altogether and just using the individual controls.

Thank you so much for your reply so quickly. I’m still a bit lost with the nuts and bolts of the code but I would love it if I could share our specific situation and ask is you could see a solution.

This is for an Aviation Engineering School. (I’m a teacher) I have set up groups and One Nots Class note books for the delivery of the content etc. It’s working really well. The next issue for me (and the school) is the assessment. I need a system that allows the following to happen. There are 10 Attributes that make a good aviation engineer (knowledge, skills, professionalism, timeliness etc etc etc) there are 8 courses that the students’ progress through during the 2 year program. Each of the 8 courses (example the first 5 week course might be Aviation Safety) has 3 or 4 times when an assessment is made. This assessment is the puzzle i need help with. I need the student to mark themselves out of 10 in each of the assessment areas, I also need the tutor to mark the students out of 10 in each of the assessment areas and I also need to compare these values against a required level of ability. For example if the first four assessments timing for the first course showed the following:

REQUIRED LEVEL for say attitude:  goes from 4, 5, 6, and 7 (meaning the student’s attitude needs to get better as we progress.

STUDENTS PERCIEVED LEVEL; he rates himself say 10, 10, 10, 10, (student thinks he is awesome in his attitude during the first 4 assessments times:

TUTORs PERCIEVED Students LEVEL: 2, 2, 2, and 1 (tutor believes the student has a bad attitude and is below the required level and it also shows that his attitude is getting worse. It also shows the tutor and the student have very different opinions of his attitude.

 

I wish to present this data from all of the courses the run for the 2 year program onto some polished visual platform with the progression graphs that show the tutors line (of the student) and the students line (of himself) and the required line. I have currently done this in Excel and it works however it is a time consuming process for the tutor and student to enter the data in the right places (as you could imagine)

 

I can share the excel spread sheet with you but it here is the excel sheet, feel free to edit as you...

 

Do i use Forms to collect the data from the students and tutors and get it into the spread sheel that way? Do I use a spreedsheet at all? should I use Power Apps and build a common data base in an envroinment and make apps (never done that before).

 

I really need help with how to build this and what system to use.

 

All the students and teachers alike have email address within the organisation of the school Office 365 world.

 

Thanks again.

 

 

 

Hi there.

 

I Appreciate your reply and i will work to implement your solution.

 

However It looks like from this code if i had 100 columns i would have to repeat this 100 times. This seems like an awful amount of code for what should be a really simple "do both of these at the same time" . Additionally  I am not a programmer so I am still having isues with the syntax of your pseudocode. I  substitute in  "table1" in for "MyTable" and "Column_A","Column_B"... etc are changed to my headings. "Form#Control#" are changed to Textinput1.Text....2....3 etc.

 

The result of this is being told that patch has invalid arguments. What am i doing wrong?

 

Additionally some of my column names are extremey long, for example "P2Q2 Do all team members have the necessary training, inductions and authorisation to complete the task?" It is simply not practical to have all of my column titles in a massive block of code.

 

This is causing me undue stress. Is there not something as simple as Patch(Table1,(Form1,Form2)) to join them together??

 

EDIT this is what i have done 

 

"Patch(Table1, Defaults(Table1),{Date: Label5_1.Text, Email: Label11.Text,...... etc etc"

 

Thankyou

Can i get a followup? I still need the help and noone has responded

Got it working eventually. For some reason i had to make a new table for it to work it just didnt like the old one with spaces in the column names. Thanks for the help

Hi again Toasteroven. so i was the guy that asked simal questions to you man. i am fully stuck on what to do here and how to get this working at all. The 'pseudo' code that the 'support' guy sent a few days ago really made no sence to me. how did you get it to work???

ok so make sure two things

 

1) you have a connection to the correct excel document table

2) That the excel document has no spaces in th colum names (dont ask me why it just hates it. replace spaces with underscores maybe)

 

ok so the syntax is:

Patch(Table1, Defaults(Table1){a: info, b: info,.....})

Let me walk you through it.

 

In place of "table1" put the name of your table. e.g if your table was named "students" then it would be written as Patch(students, Defaults(students),{a: info,b: info....})

 

next in place of a,b and so on you put your column names EXACTLY as they are in the excel document (this is the part that hates spaces). so if i have a table in excel of 4 cells that goes          group1        results         teacher        feedback

then the syntax is now Patch(students, Defaults(students),{group1: info,results: info,teacher: info,feedback: info).

 

Finally you update the info portion. This is what you want to past into the cell. so for instance Textinput1.Text, Dropdown4.Selected.Value etc.  it is very important to remember the information type like .Text

 

So if i have an app that takes 4 text inputs that i want to write to an excel spreadsheet onselect i would write

 

Patch(students, Defaults(students),{group1: textinput1.Text,results: textinput2.Text,teacher: textinput3.Text,feedback: textinput1.Text)

 

Let me know how you get on and if you need any help 🙂

 

 

 

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Summer of Solutions | Week 3 Results | Win free tickets to the Power Platform Conference

We are excited to announce the Summer of Solutions Challenge!   This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions in the Forums to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersNumber of SolutionsSuper UsersNumber of Solutions @anandm08  23 @WarrenBelz  31 @DBO_DV  10 @Amik  19 AmínAA 6 @mmbr1606  12 @rzuber  4 @happyume  7 @Giraldoj  3@ANB 6 (tie)   @SpongYe  6 (tie)     Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersSolutionsSuper UsersSolutions @anandm08  10@WarrenBelz 25 @DBO_DV  6@mmbr1606 14 @AmínAA 4 @Amik  12 @royg  3 @ANB  10 @AllanDeCastro  2 @SunilPashikanti  5 @Michaelfp  2 @FLMike  5 @eduardo_izzo  2   Meekou 2   @rzuber  2   @Velegandla  2     @PowerPlatform-P  2   @Micaiah  2     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Week 3:Community MembersSolutionsSuper UsersSolutionsPower Apps anandm0861WarrenBelz86DBO_DV25Amik66Michaelfp13mmbr160647Giraldoj13FLMike31AmínAA13SpongYe27  

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Top Solution Authors
Top Kudoed Authors
Users online (2,883)