cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
adamtj
Helper II
Helper II

Substitute multiple "words" in one string

Hi!
Im trying to find a way to replace mutliple words in one string.

For example I have a list with words that I want to replace with "***" in a string, if i had only one replace argument then I could simply use Substitute( "MyString etc and so on", "etc", "***" ). However to replace all words in the string from the list I have to loop throu the list and do "the replace action". 

So for I havent found a solution for this, any one that have any solution? 

 

My main goal is to change mutliple words in one string dynamically. For example:
Input: "This is my source string"
Output: "This **** my **** string"

1 ACCEPTED SOLUTION

Accepted Solutions
RandyHayes
Super User
Super User

@adamtj 

No worries on the language - you are actually doing just fine translating from what I see.

It was me who didn't really read through as completely as I should have.

 

Grab some popcorn and relax...this is a long response!

 

I spent a little more time now and read through all the posts.  The problem you were having is that ForAll was being treating as a ForLoop development function...it is not!  ForAll in PowerApps is designed to return a table of records based on your record definition.  In Message #3, you saw the result of this.  Your Record definition for the ForAll had no column defined, so you were going to get a Table of records based on the Split formula...a Result column.  But they are all going to be different and there is not a real good way to put them together.

So, you can't use ForAll like a ForLoop.  PowerApps is not a development platform, so it really doesn't have those type of functions - it's all about tables and records.

 

Okay, that said...so what you are trying to do is not a problem, but it does take some steps to get there.  The key is to be able to split the Notes text by the keywords.  And, since the Split function requires a specific split text, and yours is variable, then Split is really not helpful.  The next key is to abide by the No-Code platform that PowerApps is and adapt to the way that it needs to process data.

 

What needs to be done is to identify all the locations in the text where any of the keywords are found, then use the locations and lengths to rebuild the text and remove the "found" information.

 

So...here we go!

Using your example in Message #3 - The formula would be this:

 

With({_redactText: "****"; _keyWords: ["test@mail.com"; "999-123 45 67"]; _textToAlter: "Test string with an e-mail: test@mail.com and and phone: 999-123 45 67."};
    With({_items:
        With({_wds:
            // STEP 8: sort by location for purpose of rebuild of string
            Sort(
                // STEP 7: drop the table column - not used hereafter
                DropColumns(
                    // STEP 6: remove records with no word
                    Filter(
                        // STEP 5: Add the word to the record
                        AddColumns(
                            // STEP 4: Ungroup the table by the Value column to provide a table 
                               with inner records
                            Ungroup(
                                // STEP 1: iterate through keywords. 
                                   Note: no record defined so results will be a table in the Value column
                                ForAll(_keyWords;
                                    // Filter out empty locations
                                    Filter(
                                        // STEP 3: Group by the distinct locations
                                        GroupBy(
                                            // STEP 2: Cycle through entire string and gather all locations 
                                               where the keywords exist
                                            ForAll(Sequence(Len(_textToAlter)) As _seq;
                                                // return a record with the word, and location
                                                {wd:Value; loc:Find(Value; _textToAlter; _seq.Value)}
                                            ); 
                                        "loc"; "_locs"
                                        ); 
                                        !IsBlank(loc)
                                    )
                                );
                                "Value"
                            ),
                            "wd"; First(_locs).wd
                        );
                        !IsBlank(wd)
                    );
                    "_locs"
                );
                loc
            )};

            // STEP 9: iterate over a sequence based on the number of records in the _wds table
            ForAll(Sequence(CountRows(_wds));
                With({_prev:Last(FirstN(_wds; Value-1))};
                    // define record for Table as the prior record with the prev and len column added and values 
                       based on previous word
                    Patch(Last(FirstN(_wds; Value)); {prev: Coalesce(_prev.loc; 1); len:Len(_prev.wd)})
                )
            )

        )};

        // STEP 10: RETURN RESULTS
        If(CountRows(_items)=0;
            // Nothing to alter - return original
            _textToAlter;
            // Rebuild new string
            Concat(_items; Mid(_textToAlter; prev+len; loc-len-prev) & _redactText) & 
            With(LookUp(_items; loc=Max(_items; loc)); Mid(_textToAlter; loc + Len(wd)))
        )

    )
)

 

 

There are a lot of lines to the above because there are a lot of basic actions going on to get the data table shaped properly to be able to feed it to the final formula in the RETURN RESULTS section.

 

So here is what is going on - you need to read this from the inside out.

What we are doing is first building a table of all the locations of all the keywords.  This is all being put into the scoped With variable called _wds.  That variable will have a table of records with a wd and loc column.  The values will be the word and the location found (note as well, the formula will account for ALL instances of a keyword, not just one).

To get that table, we first iterate through all the keywords table (STEP 1).  This will give us our iterator.  That is then used to look through the entire string (this is the inner-most ForAll function) - STEP 2.  That is where we cycle through all the string based on the length of the string.  That ForAll returns the word in wd and the location found in loc as a record.  Since this will produce a lot of duplicated words and locations (because we just go through the string letter by letter), the formula is Grouping them by the loc (location) - STEP 3.  This will return a table with a distinct list of locations.  It will have a table column called _locs in it...we really don't need it except for the word in it. (NOTE, we also filter at this step to remove any blank locations).

 

So now we have a table from the Primary STEP 1 ForAll function.   Records will have ONLY a Value column that contains a record.  That record has a column called loc with a number and a column called _locs with a table.

 

In STEP 4, we remove the grouping of the Value column.  This will result in a table that has records with a loc column and a _locs column.  With that we then grab the word from the first record of the _locs column table and add it to the table we are building - STEP 5.

 

In STEP 6 we do a filter on the table we are building to remove any blank words.

 

STEP 7 we get rid of the _locs table column as we no longer need it (not really necessary, but just to be "clean").

 

STEP 8 we do a sort on all the loc columns as we want the table to be sorted by location in the string for rebuilding.

 

All of the above steps produce a formatted, sorted and clean table for the next process.  This is all stored in the _wds With variable.

 

In STEP 9, we work on the _wds table to add some more vital information.

So, we iterate over that table based on the number of rows in the table.  We get the previous record from the table first and assign it to a scoped With variable called _prev.  This is the record before the record we are currently working on - we need it for some values.  

Since we're in a ForAll, we need to define our record for the resulting table.  In this case, our record is made from the Patch of the _wds record (wd and loc) and we add two more columns, the prev column (which will hold the value of the previous word record location - note: coalesced to avoid blanks and set to 1 as the start), and the len column (which will hold the length of the previous word.)

All of this (STEP 9) produces a table.  Each record in the table will have a wd, loc, prev and len column with values.  It is all assigned to a With scoped variable called _items.

 

And that brings us to the final step - STEP 10.  We now have a formatted, sorted and data-full table with all the information we need to rebuild a string.

So, first off...if there happen to be no items in our table (no matches from prior steps), then we just return the original text.

Otherwise, we just iterate through the _items table in a Concat statement.  In that we use the Mid function to return bits and pieces of the original text based on all the locations and information we gathered in our table.  And then we append the redact text.  This will have returned not found text up to that location and then have the redact text in place of the keyword found.  

This then continues for the rest of the records in our table of locations.

Finally, we append the result with the Mid text to the end of the original text starting with the last location and length of word found.

 

SO...based on your example text, your resulting text from:

     Test string with an e-mail: test@mail.com and and phone: 999-123 45 67.

will be:

     Test string with an e-mail: **** and and phone: ****.

 

I hope this is all clear and helpful for you.  

_____________________________________________________________________________________
Digging it? - Click on the Thumbs Up below. Solved your problem? - Click on Accept as Solution below. Others seeking the same answers will be happy you did.
NOTE: My normal response times will be Mon to Fri from 1 PM to 10 PM UTC (and lots of other times too!)
Check out my PowerApps Videos too! And, follow me on Twitter @RandyHayes

Really want to show your appreciation? Buy Me A Cup Of Coffee!

View solution in original post

20 REPLIES 20
WarrenBelz
Most Valuable Professional
Most Valuable Professional

Hi @adamtj ,

Do you mean something like

ForAll(
   YourListName,
   Substitute(
      YourString,
	  YourListFieldName,
	  "***"
   )
)

 

Please click Accept as solution if my post helped you solve your issue. This will help others find it more readily. It also closes the item. If the content was useful in other ways, please consider giving it Thumbs Up.

Visit my blog Practical Power Apps

Hi @WarrenBelz 
Thank you for replying!
I tried something like that but it did not change the source string, it returned another list with strings substituted with that current record in the list (the list in the ForAll loop)


In this example "TempStr" = 'Test string with an e-mail: test@mail.com and and phone: 999-123 45 67.'
Listitems in "GDPRContent" = 'test@mail.com' and '999-123 45 67'

UpdateContext({TempStr:{Text: varGdprLeadsNote.NotesHtmlText}});;

UpdateContext({TempCol:
    ForAll(
        Split(varGdprLeadsNote.GDPRContent;";");
        Patch(
            TempStr;
            {
                Text: Substitute(TempStr.Text; ThisRecord.Result; "****")
            }
        )
    )
})

 

Above code did not change the source string (TempStr). TempCol however returns a list:

{ Result: "Test string with a e-mail adress: **** and and phone: 999-123 45 67" },
{ Result: "Test string with a e-mail adress: test@mail.com and and phone: ****" }

 

 

WarrenBelz
Most Valuable Professional
Most Valuable Professional

Hi @adamtj ,

I am not a fan of either tables stored in Variables or Patching to them (that is what Collections and Collect) are for, however firstly try this

UpdateContext(
   {
      TempStr:{Text: varGdprLeadsNote.NotesHtmlText}
   }
);;
UpdateContext(
   {
      TempCol:
      ForAll(
         Split(
            varGdprLeadsNote,
            GDPRContent & 
            ";"
         ) As aPatch;
         Patch(
            TempStr;
            {
                Text: 
                Substitute(
                   TempStr.Text; 
                   aPatch.Result; 
                   "****"
                )
            }
         )
      )
   }
)

 

Please click Accept as solution if my post helped you solve your issue. This will help others find it more readily. It also closes the item. If the content was useful in other ways, please consider giving it Thumbs Up.

Visit my blog Practical Power Apps

adamtj
Helper II
Helper II

Hi!

I tried above solution but the results are the same unfortunately.

 

To clarify the "TempVar" and "TempCol" was only for my troubleshooting, the basic function looks like this:

ForAll(
    Split(varGdprLeadsNote.GDPRContent;";");
    Substitute(varGdprLeadsNote.NotesHtmlText; ThisRecord.Result; "****")
)

 

The problem is that I dont understand how to change the source string "varGdprLeadsNote.NotesHtmlText" to include changes made by the Substitute ForAll loop? The ForAll loop returns multiple strings, one string per item in "Split(varGdprLeadsNote.GDPRContent;";");" "List". How do I get that to be one string in the end?

 

I suppose to actually change the source string is not the solution, however is it possible to manipulate the result from ForAll to be one string incorporation the diffrent changes made by substitute?

 

Confused 🙂

WarrenBelz
Most Valuable Professional
Most Valuable Professional

Hi @adamtj ,

Please consider using a collection here - it is so much easier to manipulate the contents.

Hi @WarrenBelz ,
If its easier then im more then willing to try that. However i would appreciate any pointers you could give me on the subject.

 

My main goal is to change mutliple words in one string dynamically. For example:
Input: "This is my source string"
Output: "This **** my **** string"

WarrenBelz
Most Valuable Professional
Most Valuable Professional

Hi @adamtj ,

On reading this again, you seem to be replacing a string with itself - what is varGdprLeadsNote.NotesHtmlText and varGdprLeadsNote.GDPRContent - is this a table with two fields and where are you getting the words to replace

adamtj
Helper II
Helper II

Hi @WarrenBelz ,

I will try and explain the whole picture 🙂

The function for the app is to store and track notes and progress in a new sales leads and its on-boarding process. According to laws in EU (GDPR) information such as e-mail, phone number and similar information that could identify a person is consider sensitive. The law states that this kind of information isn't allowed to store longer than necessary. Hence the information must be traceable and erasable or able to be anonymized.

So when the user inputs information and notes into the app a series of RegEx searches are made on the text, text that matches "sensitive data" gets marked and the actual words copies and stores in same record as the actual note.

 

When the user saves the information a record with the notes and marked keywords (matched as sensitive information) will be saved in a table. Both fields are text fields, NotesHtmlText  and GDPRContent 

 

The record looks like this:

adamtj_0-1640123710280.png

 

Now to the tricky part. When the on-boarding are finished or the lead is terminated and appropriate time has past the data should be either anonymized or erased. I'm trying to anonymize the data.

 

So back to the question:

varGdprLeadsNote is the selected record in the "LeadNotesTable" that i want to anonymize.

varGdprLeadsNote.NotesHtmlText is the field that contains the actual note/information submitted by the user. 
VarGdprLeadsNote.GDPRContent is the field that contains identified sensitive "words", mail phone number etc inside the submitted note/information. The "keywords" are stored as a string separated with ";".

 

So the thing I'm trying to do is to replace NotesHtmlText with a new string where all of the keywords in GDPRContent  are replaced with "****". 

However this formula only takes me halfway. The NotesHtmlText remains unchanged which I now understand is expected.

ForAll(
    //Creates a collection to loop throu with the keywords to anonymize, by parsing the 
    //comma separeted string stored in the 'GDPRContent' field.
    Split(varGdprLeadsNote.GDPRContent;";");

    //Replaces the keywords in the submited text.
    Substitute(varGdprLeadsNote.NotesHtmlText; ThisRecord.Result; "****")
)

 

If i put the result from the ForAll into a collection I end up with a new collection containing each result from the loop:

adamtj_1-1640125651008.png

 

The result i want to write back should look like this:
<p>Bl bla **** med mer</p><p>Bla **** etc och så vidare</p>

 

As I said before any input are greatly appreciated!

 

 

WarrenBelz
Most Valuable Professional
Most Valuable Professional

Hi @adamtj ,

30 minutes on a model I built and I will have to raise the white flag

@RandyHayes , you might want to have a look

Helpful resources

Announcements

Win free tickets to the Power Platform Conference | Summer of Solutions

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**

Celebrating the June Super User of the Month: Markus Franz

Markus Franz is a phenomenal contributor to the Power Apps Community. Super Users like Markus inspire others through their example, encouragement, and active participation.    The Why: "I do this to help others achieve what they are trying to do. As a total beginner back then without IT background I know how overwhelming things can be, so I decided to jump in and help others. I also do this to keep progressing and learning myself." Thank you, Markus Franz, for your outstanding work! Keep inspiring others and making a difference in the community! 🎉  Keep up the fantastic work! 👏👏   Markus Franz | LinkedIn  Power Apps: mmbr1606  

Copilot Cookbook Challenge | Week 1 Results | Win Tickets to the Power Platform Conference

We are excited to announce the "The Copilot Cookbook Community Challenge is a great way to showcase your creativity and connect with others. Plus, you could win tickets to the Power Platform Community Conference in Las Vegas in September 2024 as an amazing bonus.   Two ways to enter: 1. Copilot Studio Cookbook Gallery: https://aka.ms/CS_Copilot_Cookbook_Challenge 2. Power Apps Copilot Cookbook Gallery: https://aka.ms/PA_Copilot_Cookbook_Challenge   There will be 5 chances to qualify for the final drawing: Early Bird Entries: March 1 - June 2Week 1: June 3 - June 9Week 2: June 10 - June 16Week 3: June 17 - June 23Week 4: June 24 - June 30     At the end of each week, we will draw 5 random names from every user who has posted a qualifying Copilot Studio template, sample or demo in the Copilot Studio Cookbook or a qualifying Power Apps Copilot sample or demo in the Power Apps Copilot Cookbook. Users who are not drawn in a given week will be added to the pool for the next week. Users can qualify more than once, but no more than once per week. Four winners will be drawn at random from the total qualifying entrants. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once. If they are drawn multiple times, another user will be drawn at random. Prizes:  One Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value, does not include travel, lodging, or any other expenses) Winners are also eligible to do a 10-minute presentation of their demo or solution in a community solutions showcase at the event. To qualify for the drawing, templates, samples or demos must be related to Copilot Studio or a Copilot feature of Power Apps, Power Automate, or Power Pages, and must demonstrate or solve a complete unique and useful business or technical problem. Power Automate and Power Pagers posts should be added to the Power Apps Cookbook. Final determination of qualifying entries is at the sole discretion of Microsoft. Weekly updates and the Final random winners will be posted in the News & Announcements section in the communities on July 29th, 2024. Did you submit entries early?  Early Bird Entries March 1 - June 2:  If you posted something in the "early bird" time frame complete this form: https://aka.ms/Copilot_Challenge_EarlyBirds if you would like to be entered in the challenge.   Week 1 Results:  Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1.  @Mathieu_Paris 1.   @SpongYe 2.  @Dhanush 2.   @Deenuji 3.  n/a3.   @Nived_Nambiar  4.  n/a4.   @ManishSolanki 5.  n/a5.    n/a

Your Moment to Shine: 2024 PPCC’s Got Power Awards Show

For the third year, we invite you, our talented community members, to participate in the grand 2024 Power Platform Community Conference's Got Power Awards. This event is your opportunity to showcase solutions that make a significant business impact, highlight extensive use of Power Platform products, demonstrate good governance, or tell an inspirational story. Share your success stories, inspire your peers, and show off some hidden talents.  This is your time to shine and bring your creations into the spotlight!  Make your mark, inspire others and leave a lasting impression. Sign up today for a chance to showcase your solution and win the coveted 2024 PPCC’s Got Power Award. This year we have three categories for you to participate in: Technical Solution Demo, Storytelling, and Hidden Talent.      The Technical solution demo category showcases your applications, automated workflows, copilot agentic experiences, web pages, AI capabilities, dashboards, and/or more. We want to see your most impactful Power Platform solutions!  The Storytelling category is where you can share your inspiring story, and the Hidden Talent category is where your talents (such as singing, dancing, jump roping, etc.) can shine! Submission Details:  Fill out the submission form https://aka.ms/PPCCGotPowerSignup by July 12th with details and a 2–5-minute video showcasing your Solution impact. (Please let us know you're coming to PPCC, too!)After review by a panel of Microsoft judges, the top storytellers will be invited to present a virtual demo presentation to the judges during early August. You’ll be notified soon after if you have been selected as a finalist to share your story live at PPCC’s Got Power!  The live show will feature the solution demos and storytelling talents of the top contestants, winner announcements, and the opportunity to network with your community.  It's not just a showcase for technical talent and storytelling showmanship, show it's a golden opportunity to make connections and celebrate our Community together! Let's make this a memorable event! See you there!   Mark your calendars! Date and Time: Thursday, Sept 19th Location: PPCC24 at the MGM Grand, Las Vegas, NV 

Tuesday Tip | Accepting Solutions

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   To enhance our collaborative environment, it's important to acknowledge when your question has been answered satisfactorily. Here's a quick guide on how to accept a solution to your questions: Find the Helpful Reply: Navigate to the reply that has effectively answered your question.Accept as Solution: Look for the "Accept as Solution" button or link, usually located at the bottom of the reply.Confirm Your Selection: Clicking this button may prompt you for confirmation. Go ahead and confirm that this is indeed the solution.Acknowledgment: Once accepted, the reply will be highlighted, and the original post will be marked as "Solved". This helps other community members find the same solution quickly. By marking a reply as an accepted solution, you not only thank the person who helped you but also make it easier for others with similar questions to find answers. Let's continue to support each other by recognizing helpful contributions. 

Reminder: To register for the Community Ambassador Call on June 13th

Calling all Super Users & User Group Leaders     Reminder: To register for the Community Ambassador Call on June 13th—for an exclusive event for User Group Leaders and Super Users! This month is packed with exciting updates and activities within our community.   What's Happening: Community Updates: We'll share the latest developments and what's new in our vibrant community.Special Guest Speaker: Get ready for an insightful talk and live demo of Microsoft Copilot Studio templates by our special guest.Regular Updates: Stay informed with our routine updates for User Groups and Super Users.Community Insights: We'll provide general information about ongoing and upcoming community initiatives. Don't Miss Out: Register Now: Choose the session that fits your schedule best.Check your private messages or Super User Forum for registration links. We're excited to connect with you and continue building a stronger community together.   See you at the call!  

Top Solution Authors
Top Kudoed Authors
Users online (3,333)