cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
FirstTry
Regular Visitor

approval workflow - Change in the list

hello everyone

 

i'm sorry in advance if this is not the right place to post my issue. Its my first post here and my first experience with SP and Power Apps.

 

So, in advance of the issue i would like to present you my initial position and my goal: 

I've created a list in SP and made an app out of it with Powerapps. The list contains absences of coworkers which can be approved or declined within an workflow. The goal of the app is to display the entries of the list i want (Filtered by name and / or two dates which one can give in via two timepickers.

 

Now i got an issue with the workflow. I receive an email where i can approve or decline what has been changed in the list. But what i was not able to do is that the workflow triggers to change the approval state in the list... Could anyone tell me how this can be done? 

 

My list is called: Abwesenheiten

My columns are called: CreationDate, CreationDateNr, Title, Name, Color, ID, Reason, Start, End, Principal, Status, ApprovalWorkflow, Comment, Approval, ApprovalState, 

2 ACCEPTED SOLUTIONS

Accepted Solutions

Thanks for the screenshots.

Again please next time remember to post question in correct forum this is Power Apps and you are asking for the help with Power Automate / Flows 

In your configuration like written above you need to:
1.) Add new action under green section of process (for Approved requests)

2.) Find Update Item of the SharePoint connector

3.) Add this action

4.) Configure it, as the ID use the Trigger information

5.) Find the property / metadata which you want to update and set its value

6.) Do the same for reject / red section

 

Added screenshots so it should be easier for you to find that in designer.
As for other aspects I would strongly recommended for you to check YT change of Jon Levesque https://www.youtube.com/channel/UClBCcDTylJUzvP8sycg6pEA his have a lot of great videos including the ones which can help you with this issue.

Community.png



View solution in original post

This has worked. Thank you so much for your support and your help.

If you're an expert in PowerApps, i might help me with my other topic where i want to implement a fitler with two timepickers.

Wish you a great day.

Thanks alot!

View solution in original post

11 REPLIES 11
365CornerDawid
Responsive Resident
Responsive Resident

Hey,

If by the workflow you referees to Flows / Power Automate then for the queries related with it you can create new topics in: https://powerusers.microsoft.com/t5/Forums/ct-p/FL_Comm_Forums

As for your descriptions:
In the Flow you dont need to only create Approval Task you need to checks its result and you are doing that via condition action and checking in it Outcome (dynamic value from Approval) equals to Approve.
IF yes then it will go to left green if not right to red.
In the conditional branch you can do other operation including update of the Status in SharePoint list via Update Item action.
For this action to work you need to have in Flow ID of the SP Item to which Approval refers!


Hope this make sense:) If something is unclear or I missed your point please let me know and provide more details - screenshots are more than welcome 🙂

IF I manage to answer your question please remember to accept the solution for other community members so they easier find answers 🙂 

First of all, thank you very much for taking your time and trying to help me. 

 

As i am really new with SP and Power Apps, your explanation hasn't brought me a solution yet, since i don't know where and how to change those settings. Attached to my comment i try to upload you all informations i can give you about my current state.

 

I've created a workflow in Flow and also created a workflow within SP for the list. The result is i receive 3 emails. 2 of those are from the workflow within SP, one creates me a task and the other collects feedback. The third email i receive from flow. There i can approve or refuse, what is more or less what i wanted. But as i approve or refuse in that mail, nothing changes in the list. 

 

I would like that the data from column Approval and Approval state would change (somehow i can't find those two colums in the list settings. U might know the reason for that)

 

Thank you again. 

rebeccas
Community Champion
Community Champion

You can do a Flow (Power Automate) that is triggered by 'When an item is created' and you will 'Send an email with options'. Then in that same Flow below the email you would have a Condition (if you have two options or you can use Switch if you have more more than two) that looks for the SelectedOption. So If SelectedOption is equal to Approve or something like that and then have the action below that does Update Item. The item you will be updating off the response is the item that was the trigger. Similar to below:

 

img1.JPG

 

This example I have is for PTO request so I also have where it sends an email after updating item to let the originator know if it was approved or not.

Thanks for the screenshots.

Again please next time remember to post question in correct forum this is Power Apps and you are asking for the help with Power Automate / Flows 

In your configuration like written above you need to:
1.) Add new action under green section of process (for Approved requests)

2.) Find Update Item of the SharePoint connector

3.) Add this action

4.) Configure it, as the ID use the Trigger information

5.) Find the property / metadata which you want to update and set its value

6.) Do the same for reject / red section

 

Added screenshots so it should be easier for you to find that in designer.
As for other aspects I would strongly recommended for you to check YT change of Jon Levesque https://www.youtube.com/channel/UClBCcDTylJUzvP8sycg6pEA his have a lot of great videos including the ones which can help you with this issue.

Community.png



Thank you once again for your help and support. I'll give my best to put my next post in the correct forum / subforum. Ty for the advice.

 

I've followed your instructions and got a step closer to the solution i think. My next issue (i'm feeling so dumb rn) is:
In the "Update Item" process field, the fields (Approval and ApprovalState) are not listed / shown...

I could set almost every field, but exactly the ones i want to are not shown / listed...

 

Thank you again for your help and your patience.

Be sure that you are updating correct site / list / item as maybe you could connect to the location very similar to yours.

Next you can try to open Advance options this will give you access to the Limit Columns by View and change it to value Use all columns:

365CornerDawid_0-1597066543170.png

 

Thank you once more for your support 🙂 Rly kind of you!

 

As you can see in the following, it doesn't show me the two columns Approval and ApprovalState. Thats why i can't select those fields in the Power Automation App. 

ActualList.PNG

ListSettings.PNG

 

Do you have any idea why those columns are not displayed and how i can get them there?

Thanks for the additional screenshots. Think I have the answer:
1.) The one with the link ApprovalState is the SharePoint 2010 or 2013 workflows link - soon SharePoint 2010 workflows are decommissioned and I assume you are working to create process to support this change. It is great as there is no so much time left.

2.) Approval column is most likely classic Approval status column and to change its value you need to use action called Set content Approval status:

365CornerDawid_0-1597132387899.png

Hope this will resolve your problem 🙂
Alternatively you can create own column to manage Approval.

 

This has worked. Thank you so much for your support and your help.

If you're an expert in PowerApps, i might help me with my other topic where i want to implement a fitler with two timepickers.

Wish you a great day.

Thanks alot!

Helpful resources

Announcements

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip: Community User Groups

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: Community User Groups and YOU Being part of, starting, or leading a User Group can have many great benefits for our community members who want to learn, share, and connect with others who are interested in the Microsoft Power Platform and the low-code revolution.   When you are part of a User Group, you discover amazing connections, learn incredible things, and build your skills. Some User Groups work in the virtual space, but many meet in physical locations, meaning you have several options when it comes to building community with people who are learning and growing together!   Some of the benefits of our Community User Groups are: Network with like-minded peers and product experts, and get in front of potential employers and clients.Learn from industry experts and influencers and make your own solutions more successful.Access exclusive community space, resources, tools, and support from Microsoft.Collaborate on projects, share best practices, and empower each other. These are just a few of the reasons why our community members love their User Groups. Don't wait. Get involved with (or maybe even start) a User Group today--just follow the tips below to get started.For current or new User Group leaders, all the information you need is here: User Group Leader Get Started GuideOnce you've kicked off your User Group, find the resources you need:  Community User Group ExperienceHave questions about our Community User Groups? Let us know! We are here to help you!

Super User of the Month | Ahmed Salih

We're thrilled to announce that Ahmed Salih is our Super User of the Month for April 2024. Ahmed has been one of our most active Super Users this year--in fact, he kicked off the year in our Community with this great video reminder of why being a Super User has been so important to him!   Ahmed is the Senior Power Platform Architect at Saint Jude's Children's Research Hospital in Memphis. He's been a Super User for two seasons and is also a Microsoft MVP! He's celebrating his 3rd year being active in the Community--and he's received more than 500 kudos while authoring nearly 300 solutions. Ahmed's contributions to the Super User in Training program has been invaluable, with his most recent session with SUIT highlighting an incredible amount of best practices and tips that have helped him achieve his success.   Ahmed's infectious enthusiasm and boundless energy are a key reason why so many Community members appreciate how he brings his personality--and expertise--to every interaction. With all the solutions he provides, his willingness to help the Community learn more about Power Platform, and his sheer joy in life, we are pleased to celebrate Ahmed and all his contributions! You can find him in the Community and on LinkedIn. Congratulations, Ahmed--thank you for being a SUPER user!  

Top Solution Authors
Top Kudoed Authors
Users online (5,844)