cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Highlighted
Helper I
Helper I

select multple buttons

Capture1.PNG

 

i am creating out of office app. I want to add a feature where the person can click on submitted and approved to see both, which of his request has he submitted and which of the request is qpproved.

 

How should I go ahead with this problem?

2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
Community Support
Community Support

Re: select multple buttons

Hi @mehul_sompura ,

Could you please share a bit more about your scenario?

Do you want to select multiple buttons within your app, then filter your Gallery Items based on the selected Request status (e.g. Submitted & Approved)?

Further, could you please share a bit more about the Filter formula you used within your app?

 

Based on the needs that you mentioned, I have made a test on my side, I think four global variables could achieve your needs. Please take a try with the following workaround:4.JPG

 

5.JPG

 

6.JPG

The data source in my app is a SP list. The Status column in my SP list is a Choice type column, which has four available options -- Submitted, Approved, Declined and Cancel.

On your side, you need to set one global variable for each Buttons within your app. Set the OnSelect property of the SubmittedButton to following:

Set(Submitted, !Submitted)

Set the Fill property to following:

If(Submitted, RGBA(56, 96, 178, 1), RGBA(255, 255, 255, 1))

Set the OnSelect property of the ApprovedButton to following:

Set(Approved, !Approved)

Set the Fill property to following:

If(Approved, RGBA(56, 96, 178, 1), RGBA(255, 255, 255, 1))

 

Set the OnSelect property of the DeclinedButton to following:

Set(Declined, !Declined)

Set the Fill property to following:

If(Declined,RGBA(56, 96, 178, 1), RGBA(255, 255, 255, 1))

 

Set the OnSelect property of the CancelButton to following:

Set(Canceled, !Canceled)

Set the Fill property to following:

If(Canceled, RGBA(56, 96, 178, 1), RGBA(255, 255, 255, 1))

 

Set the Items property of the Gallery to following formula:

Filter(
       '20190325_case13', 
       If(
           Submitted=false && Approved=false && Declined=false && Canceled=false,
           true,
           If(Submitted, Status.Value = "Submitted", false) || If(Approved, Status.Value = "Approved", false) || If(Declined, Status.Value = "Declined", false) || If(Canceled, Status.Value = "Cancel", false)
       )
)

On your side, you should type:

Filter(
       'YourDataSource', 
       If(
           Submitted=false && Approved=false && Declined=false && Canceled=false,
           true,
           If(Submitted, Status = "Submitted", false) || If(Approved, Status = "Approved", false) || If(Declined, Status = "Declined", false) || If(Canceled, Status = "Cancel", false)
       )
)

Note: The Status represents the column in your data source, which used to store the request status, e.g. "Submitted", "Approved", "Declined" and "Cancel". If your data source is also a SP list, and the Status column is also a Choice column, please take a try with above Filter solution I provided.

 

In addition, if you want to combine above Filter formula with the TextSearchbox within your app, please consider modify your formula as below:

Filter(
       Search('YourDataSource', TextSearchBox.Text, "SearchColumn1", "SearchColumn2", ...), 
       If(
           Submitted=false && Approved=false && Declined=false && Canceled=false,
           true,
           If(Submitted, Status = "Submitted", false) || If(Approved, Status = "Approved", false) || If(Declined, Status = "Declined", false) || If(Canceled, Status = "Cancel", false)
       )
)

Note: If your data source is a SP list, when you take a try with above formula, you may face a Delegation warning issue. If the amount of your SP list records is not more than 2000, you could ignore this issue.

 

Please check the following GIF screenshot for more details:Test.gif

 

 

Best regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

Highlighted
Community Support
Community Support

Re: select multple buttons

Hi @mehul_sompura ,

Have you solved your problem?

 

If you have solved your problem, please go ahead to click "Accept as Solution" to identify this thread has been solved.

 

Best regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

4 REPLIES 4
Highlighted
Super User
Super User

Re: select multple buttons

Hi @mehul_sompura . This is an interesting use case! There are likely many ways to accomplish this. One way I'm thinking of is with variables.

Maybe give this a try:

Setup "toggle-like" feature of buttons:

  • OnSelect property of Submitted button:
    • If(
          IsBlank(varSubmitted), 
          Set(varSubmitted, btn_submitted.Text), 
          Set(varSubmitted, Blank()
      )
  • Fill property of Submitted button: If(varSubmitted = btn_submitted.Text, Red, White)
  • Color property of Submitted button: If(varSubmitted = btn_submitted.Text, Black, White)
  • Test that out then repeat for all buttons.

Setup correct filtering:

  • Without seeing your Filter logic, I'll take a guess here. You can adapt it for your needs.
  • Filter(colOutOfOffice, Or(status = varSubmitted, status = varApproved))
  • I've only lightly tested this. You'll need to adjust for your needs.

Maybe this helps you! Let us know!

Take care

Highlighted
Community Support
Community Support

Re: select multple buttons

Hi @mehul_sompura ,

Could you please share a bit more about your scenario?

Do you want to select multiple buttons within your app, then filter your Gallery Items based on the selected Request status (e.g. Submitted & Approved)?

Further, could you please share a bit more about the Filter formula you used within your app?

 

Based on the needs that you mentioned, I have made a test on my side, I think four global variables could achieve your needs. Please take a try with the following workaround:4.JPG

 

5.JPG

 

6.JPG

The data source in my app is a SP list. The Status column in my SP list is a Choice type column, which has four available options -- Submitted, Approved, Declined and Cancel.

On your side, you need to set one global variable for each Buttons within your app. Set the OnSelect property of the SubmittedButton to following:

Set(Submitted, !Submitted)

Set the Fill property to following:

If(Submitted, RGBA(56, 96, 178, 1), RGBA(255, 255, 255, 1))

Set the OnSelect property of the ApprovedButton to following:

Set(Approved, !Approved)

Set the Fill property to following:

If(Approved, RGBA(56, 96, 178, 1), RGBA(255, 255, 255, 1))

 

Set the OnSelect property of the DeclinedButton to following:

Set(Declined, !Declined)

Set the Fill property to following:

If(Declined,RGBA(56, 96, 178, 1), RGBA(255, 255, 255, 1))

 

Set the OnSelect property of the CancelButton to following:

Set(Canceled, !Canceled)

Set the Fill property to following:

If(Canceled, RGBA(56, 96, 178, 1), RGBA(255, 255, 255, 1))

 

Set the Items property of the Gallery to following formula:

Filter(
       '20190325_case13', 
       If(
           Submitted=false && Approved=false && Declined=false && Canceled=false,
           true,
           If(Submitted, Status.Value = "Submitted", false) || If(Approved, Status.Value = "Approved", false) || If(Declined, Status.Value = "Declined", false) || If(Canceled, Status.Value = "Cancel", false)
       )
)

On your side, you should type:

Filter(
       'YourDataSource', 
       If(
           Submitted=false && Approved=false && Declined=false && Canceled=false,
           true,
           If(Submitted, Status = "Submitted", false) || If(Approved, Status = "Approved", false) || If(Declined, Status = "Declined", false) || If(Canceled, Status = "Cancel", false)
       )
)

Note: The Status represents the column in your data source, which used to store the request status, e.g. "Submitted", "Approved", "Declined" and "Cancel". If your data source is also a SP list, and the Status column is also a Choice column, please take a try with above Filter solution I provided.

 

In addition, if you want to combine above Filter formula with the TextSearchbox within your app, please consider modify your formula as below:

Filter(
       Search('YourDataSource', TextSearchBox.Text, "SearchColumn1", "SearchColumn2", ...), 
       If(
           Submitted=false && Approved=false && Declined=false && Canceled=false,
           true,
           If(Submitted, Status = "Submitted", false) || If(Approved, Status = "Approved", false) || If(Declined, Status = "Declined", false) || If(Canceled, Status = "Cancel", false)
       )
)

Note: If your data source is a SP list, when you take a try with above formula, you may face a Delegation warning issue. If the amount of your SP list records is not more than 2000, you could ignore this issue.

 

Please check the following GIF screenshot for more details:Test.gif

 

 

Best regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

Helper I
Helper I

Re: select multple buttons

Thanks, Got it. This is how my filter looks.

Capture3.PNG

Highlighted
Community Support
Community Support

Re: select multple buttons

Hi @mehul_sompura ,

Have you solved your problem?

 

If you have solved your problem, please go ahead to click "Accept as Solution" to identify this thread has been solved.

 

Best regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

Helpful resources

Announcements
August 2020 Community Challenge: Can You Solve These?

August 2020 Community Challenge: Can You Solve These?

We're excited to announce our first cross-community 'Can You Solve These?' challenge!

secondImage

Return to Workplace

Reopen responsibly, monitor intelligently, and protect continuously with solutions for a safer work environment.

secondImage

Super Users Coming in August

We are excited for the next Super User season.

secondImage

Community User Group Member Badges

FIll out a quick form to claim your community user group member badge today!

secondImage

Power Platform 2020 release wave 2 plan

Features releasing from October 2020 through March 2021

Top Solution Authors
Top Kudoed Authors
Users online (6,816)