cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
DeReuse01
Level: Powered On

Add image control - native camera resolution

I have built an app with an add image control. If I take a photo from the photo library of my iphone, I can upload large resolution photos. But if I choose the native camera instead of the photo library, the photo is taken again in a low resolution (such as with the camera control) Can I set the 'Add image control' that when I open the native camera the photo will be in the highest resolution possible,  or is here is also the same problem as what is involved with the camera control (640 x 480).

3 ACCEPTED SOLUTIONS

Accepted Solutions
Community Support Team
Community Support Team

Re: Add image control - native camera resolution

Hi @DeReuse01 ,

I've made a similar test and met the same problem as you described.

I’m afraid the camera control has the resolution limit at 640 x 480 in PowerApps currently.

Here is another thread talking about the same issue:

https://powerusers.microsoft.com/t5/General-Discussion/PowerApps-Camera-Image-Resolution-Size-Limit/...

Someone has posted his idea bout it, you could vote for him:

https://powerusers.microsoft.com/t5/PowerApps-Ideas/Camera-Image-Resolution/idi-p/34977

 

 

Best regards,

Community Support Team _ Phoebe Liu

Community Support Team _ Phoebe Liu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

DeReuse01
Level: Powered On

Re: Add image control - native camera resolution

Hello @goobernoodles 

thanks for your reply. But I just use the upload media control. If you open the native camera from this and then upload a photo, the resolution is still 480 x 600. If you use a picture from the library, it will have a full resolution. We have now built the app and given our employees the information to take first a photo and then load the photo from the library into the app. But very remarkable, if you send a photo from a smartphone, the resolution will be lowered again. The cause of this lies in a setting at the app on a smartphone. You have to switch off the optimization. If it is disabled, you will send the photo in high resolution.

View solution in original post

DeReuse01
Level: Powered On

Re: Add image control - native camera resolution

Hello @goobernoodles ,

Thanks for your reply. As you indicate you can take photos in full resolution and save them but you should not forget to disable a setting of PowerApps on your smartphone. That is the setting to optimize PowerApps. If this is enabled, the photos will be converted  from the highest resolution to a low resolution.

 

IMG_1225.PNG

View solution in original post

6 REPLIES 6
Community Support Team
Community Support Team

Re: Add image control - native camera resolution

Hi @DeReuse01 ,

I've made a similar test and met the same problem as you described.

I’m afraid the camera control has the resolution limit at 640 x 480 in PowerApps currently.

Here is another thread talking about the same issue:

https://powerusers.microsoft.com/t5/General-Discussion/PowerApps-Camera-Image-Resolution-Size-Limit/...

Someone has posted his idea bout it, you could vote for him:

https://powerusers.microsoft.com/t5/PowerApps-Ideas/Camera-Image-Resolution/idi-p/34977

 

 

Best regards,

Community Support Team _ Phoebe Liu

Community Support Team _ Phoebe Liu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

DeReuse01
Level: Powered On

Re: Add image control - native camera resolution

Hello Phoebe @v-yutliu-msft ,

 

thanks for your reply. I hope the Microsoft PowerApps team gets on to work on this. If you use an app from a PC, okay. But in many cases you make an app for use on a mobile device such as a smartphone. I have searched the internet for a long time to find a way to send high resolution photos via PowerApps to SharePoint, finally I thought I found it. So it's a bit disappointing that we first have to take the photos outside of PowerApps and then pull them back into PowerApps. But thank you very much for wanting to help.

Best regards,

Samuel

Highlighted
goobernoodles
Level: Powered On

Re: Add image control - native camera resolution

A workaround is to use the upload media control.  If you're on a phone, when you add an image, it gives you the option to take a photo.

DeReuse01
Level: Powered On

Re: Add image control - native camera resolution

Hello @goobernoodles 

thanks for your reply. But I just use the upload media control. If you open the native camera from this and then upload a photo, the resolution is still 480 x 600. If you use a picture from the library, it will have a full resolution. We have now built the app and given our employees the information to take first a photo and then load the photo from the library into the app. But very remarkable, if you send a photo from a smartphone, the resolution will be lowered again. The cause of this lies in a setting at the app on a smartphone. You have to switch off the optimization. If it is disabled, you will send the photo in high resolution.

View solution in original post

goobernoodles
Level: Powered On

Re: Add image control - native camera resolution

It sounds like perhaps there may be something misconfigured.  Perhaps the way things are set up in your app, you're saving images at the dimensions of your image control within your app, rather than the actual image size.  Just a thought.

 

This should help you out:  https://www.youtube.com/watch?v=P6xMLprDTjU

 

I've successfully uploaded full resolution images using the upload media control.  That's for both new photos using the built in camera (by pressing "Take Photo") or by choosing an existing photo on my phone.  I've had successful tests saving photos to Sharepoint, Azure SQL and Azure Blob Storage. I can throw together a little app if you need.

DeReuse01
Level: Powered On

Re: Add image control - native camera resolution

Hello @goobernoodles ,

Thanks for your reply. As you indicate you can take photos in full resolution and save them but you should not forget to disable a setting of PowerApps on your smartphone. That is the setting to optimize PowerApps. If this is enabled, the photos will be converted  from the highest resolution to a low resolution.

 

IMG_1225.PNG

View solution in original post

Helpful resources

Announcements
firstImage

Microsoft Business Applications Virtual Launch Event

Join us for an in-depth look at the new innovations across Dynamics 365 and the Microsoft Power Platform.

firstImage

Demo Extravaganza Championship Voting Open

Voting Ends: October 30, 2019!

firstImage

Watch Sessions On Demand!

Continue your learning in our online communities.

Power Platform 2019 release wave 2 plan

Power Platform 2019 release wave 2 plan

Features releasing from October 2019 through March 2020

FirstImage

Power Platform World Tour

Coming to a city near you

thirdimage

PowerApps Community User Group Member Badge

Fill out a quick form to claim your user group badge now!

FourthImage

Join PowerApps User Group!!

Connect, share, and learn with your peers year-round

Top Kudoed Authors
Users Online
Currently online: 429 members 4,691 guests
Please welcome our newest community members: