cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Ollek
Helper II
Helper II

Choosing from galleri do not work when testing in editor

HI,

This morning choosing a line in galleri does'nt work when testing in powerapp editor ?  xxx.selected is allways the first?  I tested this in Google Chrome.   In Edge the app chrash when loading the app in the editor.? 

 

 

22 REPLIES 22

Did you do anything, or just wait? And do you still have version 3.19052.19?
I still get the same result. App starts, choosing a menu item, app restart and no response from the gallery item I click on. 

 

I'm tried to edit, save and publish a new version now to see if it helps, but same...  

@TurboTape 

Hi I did do some test like the following 

 

1. I created a new app

2. I insert (new ones) the two galleries that I have on my start screen 

3. Then I copied the screens from my faulty app, but only one that show column or was not connected to my galleris. 

3 then i tryed to do the same with update screen, but then the error came back to the galleries. So insteed I copyed all from the screen except the update form. 

4 I the remaded the update form without coping anyting from the fault app form.   

5. I also took way all code that contened "Concurrent", I have a mistake about using that. 

And after that the new app work as the old one.  Though when I saw that a version 3.19052.18 was released i went back to the old to test it again, now it worked. 

So you kan say that I waited .   For me it look liked there was some error in the connection between the galleri and the newform.   

Kind regards 

Olle 

 

 

 

 

 

@Ollek 

 

Good to hear it works for you, and thanks for sharing your experience. 

I had power apps version 3.19052.18 on Friday, and everything was OK. Today its version 3.19052.19 and all my apps get the gallery problem if I edit them in the new version. They will run fine on .16, .17 and .18. My problem is I did a small bugfix on my biggest app this morning, and now it's stuck on .19 . I tried to roll back to .18 and .17, but it didn't help. 😞

 

It seems like a gallery problem as I have multiple functions failing, from edit form to just showing details about an item in a text box. All galleries within the app are failing in all the apps I have. 

 

I really hope I don't have to copy + paste to a new one, as I have a very large business system app for my company. 

 

For me, it seems like a .19 issue.

Anonymous
Not applicable

getting the similar issues with gallery control in our apps under 3.19052.19. Previous versions worked ok.
Hope it will be resolved soon.

Andy_
Regular Visitor

Hi All,

I am also experiencing this on a number of my apps for a client, a few of which are in production.
There is something very fishy going on.
To explain it simply.
On a page you have 2 galleries and a button.
Gallery 1 (Gallery_SiteVisits) has a listing of orders. Its 'Items' property is

SortByColumns(Filter(Col_Service_Bookings,varClaimUserName = Agent.Claims && Completed = "No"),"Modified",Ascending,"Client_Site_Name",Ascending)


Gallery 2 has a listing of client details where the the 'Items' property is

Filter(ClientsCollection,Client_Name_Site = Gallery_SiteVisits.Selected.Client_Site_Name)


Now when I am in edit mode, and I click an entry on gallery 1, the 2nd gallery will display the details based on the 'Gallery.Selected' method
It doesnt.
BUT, if I go to the code and delete a few characters from the 'Gallery_SiteVisits.Selected.Client_Site_Name' and then allow the autocomplete to suggest the column from the selected operation suddenly it works.
BUT... only once. You can click the Gallery 1 items as many times as you want with no effect.
Odd.
Then the final 3rd item on the screen is a label which I am using as a button. On the label , on the 'DisplayMode' function we have this.

If(CountRows(Gallery_ServiceVisitDetails.AllItems)>0,DisplayMode.Edit,DisplayMode.Disabled) 

Very basic, If the number of rows in that gallery are greater than zero, then display it as editable/clickable. If not, make it disabled.
This also doesnt work. I can edit the formula, by editing the digit and the formula does evaluate but doesn't action anything?
If you use the formula view in the code text area, you can see the gallery has 2 items in it. But the control wont unlock to be in edit mode.
Capture.PNG

Worth mentioning, I have tried multiple browsers, tried multiple computers and the same issue.
I rolled back a number of versions, no change.
I created a brand new app, and copied and pasted each screen and code in, Same issue.

Then I created a new app, and used a very basic setup
2 galleries, each using the sample data 'CustomGallerySample'
The 2nd gallery was filtered by the selected item from gallery 1.
This worked intermittently first did then did not?

Weirdly enough, all the apps work when you run it in 'play' mode but they dont work in edit mode?
I am currently on version 3.19052.19 and roll backs to odler versions have not helped.

Please, any assistance is highly appreciated.
Thanks,
Andrew

 

@KKhafaji @Ollek @TurboTape @Anonymous @Andy_ We have identified the issue and we are actively working on a hotfix.  We will keep the thread posted as we know more.  Sorry for any inconvenience.

Mike4
Frequent Visitor

Hi Corey,

This is impacting a PowerApp application that I have in production. I have had to implement contingency plans to work around this.

Updating the forum of the status of where this is at is very important ................

 

 

 

 

@Mike4 Your concern is understood. 

 

Update: A hotfix has been validated and is approved for deployment. Once deployed, you will need to edit your app(s) in Studio and re-publish. I will update this thread once hotfix deployment is complete.

@_Corey_ 

 

Thanks for keeping us updated.
Do you have a time estimate for the deployment? Its a new day at my location and the users are asking. 

Update: We are still working to deploy the hotfix. We encountered a technical issue which prevented us from deploying sooner. I will update this thread again once hotfix deployment is complete.

 

@TurboTape We expect the deployment to complete shortly.

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

  It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd. at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3rd, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!       Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪🌠

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

March User Group Update: New Groups and Upcoming Events!

  Welcome to this month’s celebration of our Community User Groups and exciting User Group events. We’re thrilled to introduce some brand-new user groups that have recently joined our vibrant community. Plus, we’ve got a lineup of engaging events you won’t want to miss. Let’s jump right in: New User Groups   Sacramento Power Platform GroupANZ Power Platform COE User GroupPower Platform MongoliaPower Platform User Group OmanPower Platform User Group Delta StateMid Michigan Power Platform Upcoming Events  DUG4MFG - Quarterly Meetup - Microsoft Demand PlanningDate: 19 Mar 2024 | 10:30 AM to 12:30 PM Central America Standard TimeDescription: Dive into the world of manufacturing with a focus on Demand Planning. Learn from industry experts and share your insights. Dynamics User Group HoustonDate: 07 Mar 2024 | 11:00 AM to 01:00 PM Central America Standard TimeDescription: Houston, get ready for an immersive session on Dynamics 365 and the Power Platform. Connect with fellow professionals and expand your knowledge. Reading Dynamics 365 & Power Platform User Group (Q1)Date: 05 Mar 2024 | 06:00 PM to 09:00 PM GMT Standard TimeDescription: Join our virtual meetup for insightful discussions, demos, and community updates. Let’s kick off Q1 with a bang! Leaders, Create Your Events!    Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you!

Top Solution Authors
Top Kudoed Authors
Users online (7,028)