cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Dropdown List Will Not Reset After Changing Choices

Hi, I am facing an issue where my previous choice for my dropdown list will get recorded even after I change my choice.

 

The users have to select the name of their assessor which will then show different dropdown lists based on their choices.

 

When they select assessor A, a dropdown list with "1, 2 and 3" will appear 

 

When they select assessor B, a dropdown list with "X, Y and Z" will appear

 

However, this is where the problem comes in. When the user selects assessor A --> 2 and then decide to change to assessor B --> X, when they submit the form, both 2 and X will be recorded in the SharePoint list. 

 

I have attached a picture of my SharePoint list to show the error.

 

Can anyone help me with this?

 

Thank you!

1 ACCEPTED SOLUTION

Accepted Solutions
R3dKap
Community Champion
Community Champion

Hi @Anonymous,

Thank you for all the information you provided.

Forgot to ask you about the Visible property of these controls, but I guess that each Module dropdowns is visible only when the corresponding assessor is chosen. So I guess you put something like that (at least that's what I did when I reproduced your case):

  • ModuleP datacard Visible property: Find(DataCardValue10.Selected.Value,"LYB,JL,TCH")>0
  • Module1A datacard Visible property: Find(DataCardValue10.Selected.Value,"YSY,SZY,HCS")>0
  • Module1B datacard Visible property: Find(DataCardValue10.Selected.Value,"VTLD,RHW,SMZ")>0

So here is the solution to your problem...

What you need to do is to:

  • reset the content of ModuleP dropdown when Assessor is NOT "LYB" or "JL" or "TCH"
  • reset the content of Module1A dropdown when Assessor is NOT "YSY" or "SZY" or "HCS"
  • reset the content of Module1B dropdown when Assessor is NOT "VTLD" or "RHJW or "SMZ"

To do that, put the following code in each Module dropdown Reset property:

  • ModuleP dropdown Reset property: Not(Find(DataCardValue10.Selected.Value,"LYB,JL,TCH")>0)
  • Module1A dropdown Reset property: Not(Find(DataCardValue10.Selected.Value,"YSY,SZY,HCS")>0)
  • Module1B dropdown Reset property: Not(Find(DataCardValue10.Selected.Value,"VTLD,RHW,SMZ")>0)

VERY IMPORTANT: also make sure that each of your ModuleP, Module1A and Module1B columns in your list (if they are Choices columns), don't have any default value set:

Image 18.png

This should do the trick... Tell me if this works in your app (worked for me).

Emmanuel

View solution in original post

9 REPLIES 9
v-yuxima-msft
Community Support
Community Support

Hi @Anonymous ,

 

Do you want to the DataSource to save your last choices?

Do you want to Dropdown1’s value is saved with AssesorA, and Dropdown2’s  value is saved with AssessorB?

You can try to change Dropdown’s Update to achieve your purpose.

 

I test as this:

Data Source:

20180218dropdownchoice(my sp list name)

Assessor(choice type)

D1(Choice type,value:1,2,3)

D2(Choice type,Value:x,y,z)

2090218dropdownchoicesp1.png

AppTest:

D1_DataCard5.Upate: If(DataCardValue19.Selected.Value="AssessorA",DataCardValue20.Selected,Blank())

D1_DataCard5.Visible: If(DataCardValue19.Selected.Value="AssessorA",true,false)

D2_DataCard5.Update: If(DataCardValue19.Selected.Value="AssessorB",DataCardValue21.Selected,Blank())

D2_DataCard5.Visible: If(DataCardValue19.Selected.Value="AssessorB",true,false)

20190218dropdownchoiceapptest1.jpg

Result Test:

20190218dropdownchoiceresulttest1.gif

20190218dropdownchoiceresulttest2.png

 

Hope this can be helpful.

Best Regards.

Yumia

Anonymous
Not applicable

Hi, I tried your method but I am still facing some error.

 

This is my code 

If(DataCardValue10.Selected.Value = "A" Or "B" Or "C", DataCardValue12.Selected,Blank(), DataCardValue13.Selected, Blank(), DataCardValue14.Selected, Blank(), DataCardValue15.Selected, Blank(), DataCardValue53.Selected, Blank())

When I select Assesor = "A" and select "1" then change to Assessor = "B" and select "X" and submit, my SharePoint list will save the results as "B" and "1". 

 

Can you please help me with this? 

 

Thank you!

Anonymous
Not applicable

And also I will receive an error that the field is not filled in when it is

 

PowerApps.JPG

Anonymous
Not applicable

Can anyone help me please? Thank you!

Hi @Anonymous 

 

Did you refresh the datasource of the drop down after you changed it ?

 

Regards

 

Nigel

R3dKap
Community Champion
Community Champion

Hi @Anonymous,

I think you have to re-think the way you set some of your datacard properties (update, items, defaut, etc.).

In order for me help you, could you please give me the following properties values for your Assessor and Module datacards:

  • DataCard properties
    • DataField
    • Default
    • Update
  • DataCardValue properties (the combo box)
    • Items
    • Default
    • DefaultSelectedItems
    • Reset

Also, what is the name of your datasource (your SharePoint list) ?

Finally, could you be a bit more precise in the exact behavior your want between those two combo boxes ?

Thank you,

Emmanuel

Anonymous
Not applicable

Hi, sure

 

Name of Data Source: Defect Handling

 

Name of Assessor's Data Card Properties: 

DataField: "Name_x0020_of_x0020_Assessor_x00"

Default: ThisItem.'Name of Assessor:'

Update: DataCardValue10.Selected

 

Name of Assessor's Data Card Value Properties: 

Items: Choices('DMS Health Check Results (CL)'.'Name of Assessor:')

Default: Empty

Default Selected Items: Parent.Default

Reset: False

 

Module P's Data Card Properties: 

DataField: "Which_x0020_module_x0020_did_x00"

Default: ThisItem.'Which module did you take the test for? (PMD)'

Update: DataCardValue12.Selected

 

Module P's Data Card Value Properties: 

Items: Choices('DMS Health Check Results (CL)'.'Which module did you take the test for? (PMD)')

Default: Empty

Default Selected Items: Parent.Default

Reset: False

 

Module 1A's Data Card Properties: 

DataField: "Which_x0020_module_x0020_did_x000"

Default: ThisItem.'Which module did you take the test for? (SMD Cell 1 Line A)'

Update: DataCardValue13.Selected

 

Module 1A's Data Card Value Properties: 

Items: Choices('DMS Health Check Results (CL)'.'Which module did you take the test for? (SMD Cell 1 Line A)')

Default: Empty

Default Selected Items: Parent.Default

Reset: False

 

Module 1B's Data Card Properties: 

DataField: "Which_x0020_module_x0020_did_x001"

Default: ThisItem.'Which module did you take the test for? (SMD Cell 1 Line B)'

Update: DataCardValue14.Selected

 

Module 1B's Data Card Value Properties: 

Items: Choices('DMS Health Check Results (CL)'.'Which module did you take the test for? (SMD Cell 1 Line B)')

Default: Empty

Default Selected Items: Parent.Default

Reset: False

 

When the employees select "LYB" or "JL" or "TCH", Module P (X, Y, Z) will appear

 

When the employees select "YSY" or "SZY" or "HCS", Module 1A (1, 2, 3) will appear

 

When the employees select "VTLD" or "RHJW or "SMZ", Module 1B (Q, W, E) will appear and so on

 

However, I am facing a problem where if the employees select LYB under 'Name of Assessor' and select X under Module P and decide to change to another assessor such as "YSY" and select 1 under Module 1A, when the form is submitted, YSY, X and 1 will appear in my SharePoint list. 

 

Please help me with this as it is very important for my project.

 

Thank you!

R3dKap
Community Champion
Community Champion

Hi @Anonymous,

Thank you for all the information you provided.

Forgot to ask you about the Visible property of these controls, but I guess that each Module dropdowns is visible only when the corresponding assessor is chosen. So I guess you put something like that (at least that's what I did when I reproduced your case):

  • ModuleP datacard Visible property: Find(DataCardValue10.Selected.Value,"LYB,JL,TCH")>0
  • Module1A datacard Visible property: Find(DataCardValue10.Selected.Value,"YSY,SZY,HCS")>0
  • Module1B datacard Visible property: Find(DataCardValue10.Selected.Value,"VTLD,RHW,SMZ")>0

So here is the solution to your problem...

What you need to do is to:

  • reset the content of ModuleP dropdown when Assessor is NOT "LYB" or "JL" or "TCH"
  • reset the content of Module1A dropdown when Assessor is NOT "YSY" or "SZY" or "HCS"
  • reset the content of Module1B dropdown when Assessor is NOT "VTLD" or "RHJW or "SMZ"

To do that, put the following code in each Module dropdown Reset property:

  • ModuleP dropdown Reset property: Not(Find(DataCardValue10.Selected.Value,"LYB,JL,TCH")>0)
  • Module1A dropdown Reset property: Not(Find(DataCardValue10.Selected.Value,"YSY,SZY,HCS")>0)
  • Module1B dropdown Reset property: Not(Find(DataCardValue10.Selected.Value,"VTLD,RHW,SMZ")>0)

VERY IMPORTANT: also make sure that each of your ModuleP, Module1A and Module1B columns in your list (if they are Choices columns), don't have any default value set:

Image 18.png

This should do the trick... Tell me if this works in your app (worked for me).

Emmanuel

Anonymous
Not applicable

Hi, thank you very much! That works perfectly. Heart

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

  It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd. at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3rd, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!       Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪🌠

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

March User Group Update: New Groups and Upcoming Events!

  Welcome to this month’s celebration of our Community User Groups and exciting User Group events. We’re thrilled to introduce some brand-new user groups that have recently joined our vibrant community. Plus, we’ve got a lineup of engaging events you won’t want to miss. Let’s jump right in: New User Groups   Sacramento Power Platform GroupANZ Power Platform COE User GroupPower Platform MongoliaPower Platform User Group OmanPower Platform User Group Delta StateMid Michigan Power Platform Upcoming Events  DUG4MFG - Quarterly Meetup - Microsoft Demand PlanningDate: 19 Mar 2024 | 10:30 AM to 12:30 PM Central America Standard TimeDescription: Dive into the world of manufacturing with a focus on Demand Planning. Learn from industry experts and share your insights. Dynamics User Group HoustonDate: 07 Mar 2024 | 11:00 AM to 01:00 PM Central America Standard TimeDescription: Houston, get ready for an immersive session on Dynamics 365 and the Power Platform. Connect with fellow professionals and expand your knowledge. Reading Dynamics 365 & Power Platform User Group (Q1)Date: 05 Mar 2024 | 06:00 PM to 09:00 PM GMT Standard TimeDescription: Join our virtual meetup for insightful discussions, demos, and community updates. Let’s kick off Q1 with a bang! Leaders, Create Your Events!    Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you!

Top Solution Authors
Top Kudoed Authors
Users online (4,942)