cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
davidkr
Advocate I
Advocate I

Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2227557)

Hello everbody,

 

I'm new to Power Pages and trying to learn it now. I built a new site from blank, created a table and a view. However, whenever I add a list into a page, it will disappear when the page is reloaded and the error message "

Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2227557)" will be shown instead (the number inside the parentheses is not always the same). I can add the list to the page with no problem and if I click preview after I added the list, I can view and edit the list. But as soon as I click "Sync" or reload the page, the list will be replaced with the error message. After that, when I click preview, I will also just see the error message too.
 
I tried to create a new site from blank and tried adding a list but also faced the same problem. However, when I start a new site from a template, I don't run into this problem. Could anyone please tell me what is the cause of this problem and how can I solve it? Thank you so much in advance.
1 ACCEPTED SOLUTION

Accepted Solutions

Hi @davidkr, @GWham1, @PowerBi-Rick, @seth_clossman,

 

that sounds strange but could one of you try disabling the enhanced data model for that envr.,

create a blank new power page (old model), enable enhanced data model and than check if the problem is resolved?

 

That workaround did the trick in a similar error for me.



--------------------------------------------------------------------------------------

Hope that helps.

If the post solves your problem, please mark it as solution. If it helps, consider a thumbs up.

View solution in original post

14 REPLIES 14
OliverRodrigues
Most Valuable Professional
Most Valuable Professional

I haven't seen that issue before, quite a strange one.

 

Are you using the Enhanced Data Model? How are you adding your list? is that via Liquid/HTML or via Portal Management App?




If you like this post, give a Thumbs up. Where it solved your request, Mark it as a Solution to enable other users find it.

Power Pages Super User | MVP


Oliver Rodrigues


 

Hi Oliver, I added the list the standard way on Power Pages Design Studio: clicked add a section, clicked list and followed the directions. I also created the table and the view the standard way on the "data" tab on Design Studio. This list error also comes up when I create and add a list from any other existing table/view.

 

Another strange thing is, when I add a list, the html code of that section will be

<div class="col-lg-12 columnBlockLayout" style="flex-grow: 1; display: flex; flex-direction: column; min-width: 250px; word-break: break-word;">{% include 'entity_list' key: 'List company' %}</div>

Even after the page is reloaded and the error showed up, the section of the html code will still stay the same. But If I add another element to the page (when the list error message already shows) and I check the html code again, it will become this

<div id="i5dpgp" class="col-lg-12 columnBlockLayout" style="flex-grow: 1; display: flex; flex-direction: column; min-width: 250px; word-break: break-word;">Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2240669).</div>

 

Fubar
Multi Super User
Multi Super User

Can you double check in the Default Solution in Dataverse for that Table (adx_entitylist) to confirm if the table has been installed or not.

seth_clossman
Frequent Visitor

Running into the same situation, looks like it was installed with the table being named mspp_entitylist instead of adx_entitylist

Fubar
Multi Super User
Multi Super User

@seth_clossman check if you are using Enhanced or not.  mspp_ tables are what are used if you are Enhanced.

Definitely using the Enhanced Data Model (since it is enabled now by default).  The liquid error I'm receiving says "Liquid error: Could not find an entity with name adx_entitylist and id 00000000-0000-0000-0000-000000000000 (2600911). "

seth_clossman_0-1710981162205.png

Is this some piece of legacy code in Power Pages looking for the adx_ version of the table?

David you are not alone. I created a new site Sunday and had the same problem. I am using the Enhanced Data Model. The list displays fine when initially added to the page. When I Sync the first time in the Power Pages Designer the adx_entiylist error shows. The Web page shows the list properly and I can refresh the Web page and it still works. Sometimes when I Sync again, the liquid error also wipes out the List on the Web page and the Web page loads with the adx_entitylist error. 

 

I tried deleting and rebuilding the page multiple times. I deleted the entire site and built a new one. The same thing happens on the new site. In both sites I opted to use the new list format. Then I tried it with the old list format and had the same issue.

 

PowerBiRick_0-1710989632591.png

 

PowerBiRick_1-1710989669651.png

 

 

 

 

GWham1
Resolver II
Resolver II

There has been some strange behaviour recently. I suspect you may need to contact Microsoft for assistance.

 

It may be worth checking your portal version to ensure you're on the latest version.

 

You can see this at http://yourportalurl.com/_services/about

Hi @davidkr, @GWham1, @PowerBi-Rick, @seth_clossman,

 

that sounds strange but could one of you try disabling the enhanced data model for that envr.,

create a blank new power page (old model), enable enhanced data model and than check if the problem is resolved?

 

That workaround did the trick in a similar error for me.



--------------------------------------------------------------------------------------

Hope that helps.

If the post solves your problem, please mark it as solution. If it helps, consider a thumbs up.

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Results posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 1: Community MembersSolutionsSuper UsersSolutionsPower Pages @Inogic  1   @ragavanrajan  2 @aofosu  1 @Jcook  1Open  @OliverRodrigues  1Open  @Lucas001  1Open Open    Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Week 2: Community MembersSolutionsSuper UsersSolutionsPower Pages @taraubianca25  2 @EmadBeshai  2 @ALP2  2@Fubar 2 @ekluth1  2@ragavanrajan 1 @mandela  1@OliverRodrigues 1 @Ajlan  1Open   @elishafxx  1    @TA_Jeremy  1    @helio1981  1       Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower PagesInogic2@EmadBeshai 6Ajlan1@ragavanrajan 4CraigWarnholtz1@Fubar 4  @Jcook 3  @OliverRodrigues2   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Week 4:Community MembersSolutionsSuper UsersSolutionsPower PagesHenryed071Fubar3Inogic1OliverRodrigues2JacoMathew1EmadBeshai2faruk11  TA_Jeremy1   shubhambhangale1   doug-ppc1   hubjes1  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

  On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (3,905)