cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
lmheimendinger
Resolver IV
Resolver IV

Compare rows in two arrays when not all columns are identical

Here's the problem set:  A SQL database is maintained by a LOB application.  For one table, whenever a new row is added, I have a flow that is triggered which creates a corresponding row in a SharePoint list; that list has more columns than the SQL table for additional processing.  To add a bit, there is a corresponding SQL table containing rows that are related to the table above, linked by a key value.  Each of these records is also copied to another SharePoint list.

 

When the LOB application updates, as opposed to creating new records, it merely updates the row in the first SQL table but completely replaces all the rows in the second table.  Several conditions can result:

  • some of the rows in the second SQL table may match those in SP based on three column values; these would be considered as unchanged
  • some of the rows in the second SQL table may have no matches in SP based on the three columns; these would be considered to be new rows in SP.
  • some of the rows in the SP list may have no matches in the new SQL rows, based on the three fields; these would be considered as rows to be deleted

My approach was to use Filter Array between the two actions Get rows (for SQL) and Get items (for SharePoint).  Because there are column differences, contains or does not contain won't work as they will never match completely.

 

Here's what I hoped would work:  Use Filter Array following the Get rows and Get Items (the Get rows has a filter that only gets the rows associated with the changed row in the first table, and the Get items does something similar so the two arrays have just records that correspond the way the bullet points above describe; they are specific and related groupings).

 

I manually entered in advanced mode

 

@equals(outputs('Get_Line_Items_from_original_SO')?[colA'],),outputs('Get rows (V2) from SQL for all SO Line items')?['colA'])

 

and then tried to extend it by prefacing equals with @And, then adding a similar expression for equals using colB then a third for colC.

 

I keep getting formatting errors: Condition is too complex or invalid. Unable to switch to basic mode.

 

Am I on the right path?  Is this too much for Filter Array, and even if there is a format error, would the result of the Filter Array be the rows that match on the three columns?

 

Pulling my hair out over this so any help keeps me from going bald.  Thanks.

5 REPLIES 5
lmheimendinger
Resolver IV
Resolver IV

I have a hint on how to do this from some experimental testing.  For each array, use a Select action and define the three elements to compare.  Then filter on the two outputs of the select using contains (or does not contain).  The result of the Filter array will be an array that would be the result of comparing two identical arrays but now is based on the columns in the Select action.

 

Great, but I still need the many, many fields in the two almost identical column arrays, so I now need to figure out how to go from the Select reduced data back to the original arrays.  Maybe Apply to each?  I will see.

mahoneypat
Solution Sage
Solution Sage

I think I worked out one way to do this. 

  • Created two simple arrays - one with three columns (vArray1) and another (vArray2) with the same first two columns (ID and Category).
  • Initialize an array called vFieldConcat to hold the concatenated values of the fields to be used for comparison (ID and Category in this case)
  • Used an ATE to populate that array with the concatenated values from vArray2
  • Filtered vArray1 with this expression - 
    contains(variables('vFieldConcat'), concat(item()?['ID'], item()?['Category'])) is equal to true()
     
    mahoneypat_0-1635597961709.png

     

     

    Hopefully you can adapt this approach.

     

    Pat





Did I answer your question? Mark my post as a solution! Kudos are also appreciated!

To learn more about the Power Platform, follow me on Twitter or subscribe on YouTube.


@mahoneypa HoosierBI on YouTube


 That may have effect as the two select actions I outlined in the reply to myself: it delivers a condensed array that can be compared, but then it seems I have no way to get back to the original array elements.  I need all those columns to take additional actions (i.e., create new items in SP).

 

What I am going to test today is to use the select and a filter array combination to get a new matched up array (or unmatched array) then use a ATE on that to get the rows/items that  I would need to update or delete.  It would be lovely if the Filter array would allow something like 

 

@And(equals('array1')['col1'],('array2')['col1]), equals('array1')['col2'],('array2')[col2']), equals('array1')['col3'],('array2')['col3'}))

 

because the execute time would be much faster than one or more ATE loops.  If this could be figured out, it would be a major find for me.

Note that in my suggestion it is the original array that is being filtered.  The concatenation allows you to compare 2+ columns to filter to where they match on those columns, and you can do what you need from there.

 

Pat





Did I answer your question? Mark my post as a solution! Kudos are also appreciated!

To learn more about the Power Platform, follow me on Twitter or subscribe on YouTube.


@mahoneypa HoosierBI on YouTube


Finally getting back to working on this after some travels and other tasks.

 

Interestingly, I have gone down a similar path but have stumbled on getting farther.  Here's what I did:

 

  • Created an array variable with [] as it's initial value
  • I then walked through my SP list items and added those to the array where (in my case) the data value indicates that I want to keep the item data
  • I then removed all of the SP list items whether or not they were added to the array variable
  • I then walked through the SQL array of the new/changed/deleted items, creating a new SP list item for each one

What I want to do in that Apply loop is then look at the array and see if there is a matching value so I can, after creating a new SP list item, update the columns I want to carry  forward.  What I have not figured out is the syntax to do that.

 

First, the dynamic content only exposes the array variable name, not the column names in the array.  Do I reference those as varArray["colName"]?  Even more so, how do I "walk through the array rows inside an ATE loop walking through the SQL rows, meaning refer to the current SQL item column names inside the ATE?

I kinda ask the same questions if a Filter Array action is inside the ATE.  What is the syntax to refer to current row in ATE and the array variable?  Worse, I am uncertain if the Filter Array just returns an array of the compared values or the entire array?  I need all those other fields for a selected array row.

 

Hope this makes sense.

 

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!   Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪 🌠  

Tuesday Tips: Community Ranks and YOU

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!This Week: Community Ranks--Moving from "Member" to "Community Champion"   Have you ever wondered how your fellow community members ascend the ranks within our community? What sets apart an Advocate from a Helper, or a Solution Sage from a Community Champion? In today’s #TuesdayTip, we’re unveiling the secrets and sharing tips to help YOU elevate your ranking—and why it matters to our vibrant communities. Community ranks serve as a window into a member’s role and activity. They celebrate your accomplishments and reveal whether someone has been actively contributing and assisting others. For instance, a Super User is someone who has been exceptionally helpful and engaged. Some ranks even come with special permissions, especially those related to community management. As you actively participate—whether by creating new topics, providing solutions, or earning kudos—your rank can climb. Each time you achieve a new rank, you’ll receive an email notification. Look out for the icon and rank name displayed next to your username—it’s a badge of honor! Fun fact: Your Community Engagement Team keeps an eye on these ranks, recognizing the most passionate and active community members. So shine brightly with valuable content, and you might just earn well-deserved recognition! Where can you see someone’s rank? When viewing a post, you’ll find a member’s rank to the left of their name.Click on a username to explore their profile, where their rank is prominently displayed. What about the ranks themselves? New members start as New Members, progressing to Regular Visitors, and then Frequent Visitors.Beyond that, we have a categorized system: Kudo Ranks: Earned through kudos (teal icons).Post Ranks: Based on your posts (purple icons).Solution Ranks: Reflecting your solutions (green icons).Combo Ranks: These orange icons combine kudos, solutions, and posts. The top ranks have unique names, making your journey even more exciting! So dive in, collect those kudos, share solutions, and let’s see how high you can rank!  🌟 🚀   Check out the Using the Community boards in each of the communities for more helpful information!  Power Apps, Power Automate, Copilot Studio & Power Pages

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

Users online (4,642)