cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Delete all rows in a table

I'm new to PA/Flow and very confused by this-deleting rows (no conditions, just empty the entire table) seems like a pretty obvious objective. I am trying to delete all rows in a table when a flow is triggered.

 

(Yes, my table is definitely an excel table, not a range! 🙂 )

 

The flow is marked on Power Automate as running successfully (which I believe confirms the flow is running and that there are no apparent errors, so that's good at least) but the table rows aren't deleted. 

 

The flow is triggered when a Sharepoint list is modified. 

The destination is an excel spreadsheet, which must be emptied/have all rows removed when this list is modified. 

 

(I am assuming that in order to delete a row, a condition must be met (ie, there is no way to simply delete rows without performing a logical test).

 

When an item is created or modified (in the specified Sharepoint site address and list name):

 

List rows present in a table: 

Location: Sharepoint name containing Excel file

Library: Sharepoint folder containing Excel file

File: Excel file

Table: Excel table

 

Apply to each VALUE:

Excel column 2 ('ID_Number') is equal to Excel column 2 ('ID_Number').  (Note that I am simply looking for a test that will always evaluate to true, and I see no reason why this wouldn't do so). 

 

If YES:

Delete a Row:

Location: Sharepoint name containing Excel file

Library: Sharepoint folder containing Excel file

File: Excel file

Table: Excel table 

Key column: ID_Number  (I honestly wasn't sure what to put here. I presume that the key column is important when performing logical tests, since it is checked for its value??)

Key value: ID_Number (Again, I am not sure of the relevance of the key value here. Presume this is a value that is tested for, eg greater than/less than?)

 

 

Note: the above test did not work, so just to confirm that the logical test was not evaluating as false, I duplicated the 'YES' code into 'NO':

 

If NO:

Delete a Row:

Location: Sharepoint name containing Excel file

Library: Sharepoint folder containing Excel file

File: Excel file

Table: Excel table

Key column: ID_Number  

Key value: ID_Number 

 

No joy. The flow appears to run without errors, but the table retains all of its values (all rows should be deleted). 

 

Could someone please assist? 

 

Much appreciated-thanks. 

 

16 REPLIES 16
manuelstgomes
Community Champion
Community Champion

Hi @Anonymous 

 

It looks ok, at least what you wrote.

 

Are you defining the name of the table, the key column and the key correctly? Probably it runs correctly but, since it can't match the key with the one in Excel, it doesn't delete anything.

 

Also be careful with types. You may have a String or a Float that, when compared, may be considered different than your value's type in SharePoint.

 

If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.

Cheers
Manuel

Anonymous
Not applicable

Thanks for the response. I think the 'key column' and 'key value' fields are the issue. But if the intention is to remove existing rows regardless of their currently contained value, then how do I go about removing the rows using the 'delete a row' method? Or is there an alternative approach? 

 

It does not matter whether the row / field is blank, contains 'aaa' or '123' or any other value-I just want to delete the row 🙂

 

 

Anonymous
Not applicable

@Anonymous if you are still having issues, could you provide screenshots of your flow?

 

You shouldn't have to run through a condition in order to delete the rows. Your question is asked and answered here  but basically you can use the List Rows Present in a Table as you had, then nest "Delete a row" in an "Apply to each" loop.

 

Make sure you're using Dynamic Content that matches the value you choose for your key column so that as the "Apply to Each" loops through the rows in your spreadsheet, you're matching the value in the key column to itself (thus always evaluating as "true") and prompting the Flow to delete the row.

 

It doesn't matter what field you choose as your "key column", but you need to make sure that the "Dynamic Content" that you select for your "key value" is the same field.

 

See example screenshot below:

Delete a Row.png

 

I hope this helps, let me know if you have any questions.

 

-Kyle

I'm using this approach for a scheduled Excel update, but I find one of the slowest steps is deleting the 1000+ rows in a table so I can replace them with new data. Is there a quicker way to empty the table than listing all current rows and then recursively deleting them?

 

Thanks!

Did you find a way to do this quickly and efficiently.

I too have about 1000 rows to delete (whole table contents actually)... so I can populate with new contents.

I'm doing this from Power BI --> Power Automate

- David

J0el
Helper II
Helper II

I would have thought a standard action to clear table should be created.

I don't suppose there's any update to this?

On your "Apply to each" where you delete the rows, click the "..." and select setting. Turn on Concurrency Control and crank up the Degree of Parallelism. You'll get a tenfold or greater speed boost.

 

Having said that, I don't know what any downsides would be to using this method. I use it myself and haven't had any issues that I know about.

J0el
Helper II
Helper II

The downsides are:

 

Maximum of 5000 rows

 

High utilisation of flows, therefore risk of daily limits being reached

 

Time taken to delete 5,000 rows takes hours, whereas a delete table contents option would mitigate all of the above

TonyDew
Frequent Visitor

Thank you for the clarification! I was sure there must be some downside.

Bhavyaa
Frequent Visitor

Hi Joel,

 

Hope you suggested using Delete table in the Transform query using Power Automate since Execute SQL query is not allowed..But if we use it in Transform Query, rows are getting deleted even if we recreate again.. Did u face that problem.It would be grateful if you can suggest.

shtryler
Advocate I
Advocate I

I was also very annoyed by the slow performance of the "apply-to-each"+"delete"-loop and decided to use a workaround via the "Run script"-action. With the following script I managed to reduce the runtime from 30 minutes to 30 seconds. Maybe it's helpful to some of you as well:

 

function main(workbook: ExcelScript.Workbook) {
   let table = workbook.getTable("YOUR_TABLENAME_HERE");
   let tableRange = table.getRangeBetweenHeaderAndTotal();
   // errorhandling if the table is already empty
   if (tableRange.getRowCount() == 1) {
      console.log("nothing to delete");
   }
   else {
     // delete all the cells in the table data range, the table range is then reset automatically
      tableRange.delete(ExcelScript.DeleteShiftDirection.up);
   }
}

 

 

 

FYI, I also tried the table method for row deletion:

 

//delete all rows from index 0
table.deleteRowsAt(0, tableRange.getRowCount())

 

This was very slow as well and resulted in a script timeout.

 

Hope this helps some of you, best wishes

Hans

Thanks, this solution was helpful and useful.

Anonymous
Not applicable

this is a nice idea but i get an error when i try. my sheet is called Ark3 and there is only one table on that sheet. there is other tables in sheet Ark1 and Ark2. can you explain why it says Cannot read properties of undefined reading getRange

mathiesjeppesen_0-1666173541709.png

 

shtryler
Advocate I
Advocate I

Hey, sorry about that. There was an error in my example code (I already corrected it in the post), you can delete lines 3 and 4 and replace them by

let table = workbook.getTable("YOUR_TABLENAME_HERE");

 The name of the sheet on which the table is located doesn't matter in this case.

 

Best wishes

Hans

Anonymous
Not applicable

HI 🙂

 

the code wors perfectly 🙂 however when i run it from a power automate flow i do not work. if i want it to work in a power automate flow do i need the have a code that point to a specific excel sheet and  a specific table name?

Wow, that was really helpful.

I only have the problem that my table has no total row and cannot have it as it will be exported afterwards. Is there any solution without the total row or can I add/remove the row via script?

Helpful resources

Announcements

Check out the Copilot Studio Cookbook today!

We are excited to announce our new Copilot Cookbook Gallery in the Copilot Studio Community. We can't wait for you to share your expertise and your experience!    Join us for an amazing opportunity where you'll be one of the first to contribute to the Copilot Cookbook—your ultimate guide to mastering Microsoft Copilot. Whether you're seeking inspiration or grappling with a challenge while crafting apps, you probably already know that Copilot Cookbook is your reliable assistant, offering a wealth of tips and tricks at your fingertips--and we want you to add your expertise. What can you "cook" up?   Click this link to get started: https://aka.ms/CS_Copilot_Cookbook_Gallery   Don't miss out on this exclusive opportunity to be one of the first in the Community to share your app creation journey with Copilot. We'll be announcing a Cookbook Challenge very soon and want to make sure you one of the first "cooks" in the kitchen.   Don't miss your moment--start submitting in the Copilot Cookbook Gallery today!     Thank you,  Engagement Team

Announcing Power Apps Copilot Cookbook Gallery

We are excited to share that the all-new Copilot Cookbook Gallery for Power Apps is now available in the Power Apps Community, full of tips and tricks on how to best use Microsoft Copilot as you develop and create in Power Apps. The new Copilot Cookbook is your go-to resource when you need inspiration--or when you're stuck--and aren't sure how to best partner with Copilot while creating apps.   Whether you're looking for the best prompts or just want to know about responsible AI use, visit Copilot Cookbook for regular updates you can rely on--while also serving up some of your greatest tips and tricks for the Community. Check Out the new Copilot Cookbook for Power Apps today: Copilot Cookbook - Power Platform Community.  We can't wait to see what you "cook" up!    

Welcome to the Power Automate Community

You are now a part of a fast-growing vibrant group of peers and industry experts who are here to network, share knowledge, and even have a little fun.   Now that you are a member, you can enjoy the following resources:   Welcome to the Community   News & Announcements: The is your place to get all the latest news around community events and announcements. This is where we share with the community what is going on and how to participate.  Be sure to subscribe to this board and not miss an announcement.   Get Help with Power Automate Forums: If you're looking for support with any part of Power Automate, our forums are the place to go. From General Power Automate forums to Using Connectors, Building Flows and Using Flows.  You will find thousands of technical professionals, and Super Users with years of experience who are ready and eager to answer your questions. You now have the ability to post, reply and give "kudos" on the Power Automate community forums. Make sure you conduct a quick search before creating a new post because your question may have already been asked and answered. Galleries: The galleries are full of content and can assist you with information on creating a flow in our Webinars and Video Gallery, and the ability to share the flows you have created in the Power Automate Cookbook.  Stay connected with the Community Connections & How-To Videos from the Microsoft Community Team. Check out the awesome content being shared there today.   Power Automate Community Blog: Over the years, more than 700 Power Automate Community Blog articles have been written and published by our thriving community. Our community members have learned some excellent tips and have keen insights on the future of process automation. In the Power Automate Community Blog, you can read the latest Power Automate-related posts from our community blog authors around the world. Let us know if you'd like to become an author and contribute your own writing — everything Power Automate-related is welcome.   Community Support: Check out and learn more about Using the Community for tips & tricks. Let us know in the Community Feedback  board if you have any questions or comments about your community experience. Again, we are so excited to welcome you to the Microsoft Power Automate community family. Whether you are brand new to the world of process automation or you are a seasoned Power Automate veteran - our goal is to shape the community to be your 'go to' for support, networking, education, inspiration and encouragement as we enjoy this adventure together.     Power Automate Community Team

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Users online (4,943)