Showing results for 
Search instead for 
Did you mean: 
Regular Visitor

File Link in An Approval not working!! Please help

I am very new to this and teaching myself.  It is proving rather difficult.... but I am working through each issue and cannot figure this one out.  If anyone knows of a free site that explains all of the different choices for FLOW and the dynamic content and expressions, please send the links my way.


My flow is as follows:

1. When a file is created (properties only)

2. Start an approval process-- when the file is created in one place, it will send an e-mail to me asking me to approve the file (with the file link hopefully attached to the e-mail)

3. Condition- Response is equal to Approve

4.  If yes- send an e-mail to the file creater stating that the file was approved.  Then create a file in a different site folder

If no - Send an e-mail to the creater of the file and ask them to edit and re-upload.


That's the summary.  I cannot figure out how to upload my screen shots.  I am getting an orange circle with a pie piece on the "Start Approval" step and for the "Condition Step I have a Triangle icon with ! inside of it and the text in this area says "Not Specified"


Any ideas what I could be doing wrong? Where is the actual error?  In the approval step or in the condition?


Thank you in advance for any help you might be able to provide.  I am finding that none of the templates do exactly what I want so I have been taking pieces for each to create my own. 


UPDATE:  I found approvals waiting on my FLOW page, however,  I did not receive any e-mails stating that I had documents to approve.  I went in to look at them and I can see a link, but when I click on the link it does not open-- says the link is bad.  What is wrong here?


When I approved the file, it did not create the file in the folder in the other site.  It added a link that looked like my e-mail address that will not open.  When I rejected a different test file, I did receive the e-mail stating it had been rejected. 


How can I correct these errors in my flow to achieve the desired results for the file to be created on another sharepoint site and for the link in the approval e-mail to work?


Thank you!


Community Support
Community Support

Hi @ redhead7,


Could you please share a screenshot of the configuration of your flow?


Please refer to screenshot below to create the flow:






The flow would send the approval request as below:



The link in the request could would like to the file.


When the request is approval, the flow would run successfully as below:



The file would be created in another site as below:



Please let me know if your problem could be solved.



Alice Zhang

Regular Visitor

I was able to get the flow to work the way I imagined it working but I had to add an additonal step (Get File Contents) between Send an Email and Create File. 


Now I am wondering-- can the original file be attached in the e-mail that is sent back to the uploader of the file?

Hi @ redhead7,


Could you please explain more about the "can the original file be attached in the e-mail that is sent back to the uploader of the file?" that you mentioned?


Do you want to send the original file in an email?


If you want to send the original file in an email,I afraid that there is no way to achieve your needs in Microsoft Flow currently.


If you would like this feature to be added in Microsoft Flow, please submit an idea to Flow Ideas Forum:



Please let me know if your problem could be solved.



Alice Zhang

Hi everyone,

got my new approval flow working!

But I have to say it´s a bit tricky, as links into an approval mail are not active if you use outlook on your computer.

Links only works in outlook online (browser).


Is there a workaround for this?

ty Thomas


Any update on this?  Really need to have links working on Outlook desktop version!

Hi to everyone,


for me it works with a small "workaround" as I use the "send E-Mail with options" solution and configure it as an HTML E-Mail.

Maybe that helps others...



@kcurran the issue is solved by updateding the installed version of Outlook



If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.

Not applicable

Hi @Oliandril


I was wondering if you could post a picture of your example flow. I am requried to use Outlook for desktop for our approvals


Thanks in advance

Helpful resources


Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (2,134)