cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
dxshyam
Advocate I
Advocate I

MS Flow - Pagination Error from today on all instances

Greetings!

 

We created a flow to deactivate all contacts on a specific date which is read from a custom entity (this entity contains only one record). 

 

We have around 6500 contacts, since by default only 512 records were being processed, we set the Pagination On and Threshold as 10000. This resolved our problem and were able to successfully deactivate, activate all records several times.

 

Today when we tried we were getting Pagination Error, I am getting this in two of my trial accounts as well as my licensed instance

 

InvalidPageResponse. The response is not a valid paginated response. The specified nextLink 'https://unitedstates-002.azure-apim.net/apim/commondataservice/shared-commondataser-1ed6529d-d7b5-48...' is not a well formed URI.

 

Any idea why I am getting this error today? How to fix this? Is there any issue Azure today?

 

Below are the snap shots

 

001.png

 

 

 

 

 

 

 

Expanding Recurrence

2.png

 

Expanding List Records and its settings. Here we are reading a custom entity 'Deactivation date' which contains only one record. This record holds the date when all Contacts should be deactivated.

 

3.png

 

Expanding Apply to Each 3. Here in condition2, we check if current date is equal to deactivation date and if true using List records2 we filter all Active Contacts

4.png

 

In List Records 2 we filter for Active Contacts, in settings we have kept Pagination On and Threshold as 10000

 

5.png

 

In apply each, we are setting the status to Inactive

 

6.png

 

The flow fails by giving pagination error

 

7.png

 

Zooming the error message

 

8.png

 

 

Thanks,

Shyam

36 REPLIES 36

@Anonymous I am using List Records for Common Data Service.

I had 4050 Active Contact records, My flow is supposed to deactivate all Active Contact records.

This time I kept the Pagination OFF and Threshold as 4050 to see if it helps (although in my case the number of records would vary and I can never keep the exact count here)

 

Observation: The flow processed the default limit of 512 records, so 512 out of 4050 Active Contacts were deactivated in this execution of flow and now I have 3538 Active Contacts.

 

In my case Turning OFF Pagination did not help

 

Regards,

Shyam

Rashkae
Frequent Visitor

Can confirm turning pagination off for the Excel Connector and setting the threshold to 10k fixed the error

Another observation when using List Record connector for Common Data Service is, When the Pagination is OFF, you set some value say 10000 to Threshold and save. it actually does not save that value even though it shows that value in Threshold.

 

Confirmed this by opening the Flow again and checking the settings for Threshold. The threshold is empty and therefore the flow executes with default limit of 512 records.

 

Regards,

Shyam

dbridges101
Regular Visitor

I am having the exact same behavior with pagination using CDS List Records action. Worked up until last night for me. 

vecerpa
Memorable Member
Memorable Member

Latest info from support is that there has been rolled out fix to all environments. It should be applied till end of today. But not yet confirmed that it works.
Pavel

Hi Pavel,

 

Thanks for sharing the update, is there any URL to check the update on this or have they communicated to you via email.

 

Thanks,

Shyam

Hi @frantisekcapek ,

 

Thanks for sharing your temp solution. what expression have you used inside Condition2? is it length(List Records)?

 

9.PNG

 

Thanks,

Shyam

dxshyam
Advocate I
Advocate I

Hi All,

 

Spoiler
Looks like it is fixed 

 

Just triggered my flow manually with Pagination ON and Threshold 10000 and processed over 1000 records with List records for Common Data Service connector. After this completes execution, I will do another 3-4 rounds of testing with about 6500 records each. Will post my observation in about 4-5 hours from now.

 

Thanks,

Shyam

Hey @dxshyam ,

yes, the expression is length(body('List_records')?['value']).

Best Regards,
Frantisek

Spoiler
Resolved: List Records for Common Data Service

I have done 4 rounds of testing in two instances with about 6500 records to process by keeping Pagination ON and Threshold 10000. I can say that this is working fine for me now.

 

Thank you all for sharing your experience and expertise.

 

Regards,

Shyam

@frantisekcapek Thanks for sharing your work around.

 dxshyam No problem mate

 

Hi @dxshyam  & All,

 

The message I am currently receiving is "The hotfix has been deployed successfully to all the region, and the issue has been Mitigated."

What is the situation on your side? Please check it and if the problem still exists, please let us know.

 

Best Regards,

Community Support Team _ Barry
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Hi Barry,

 

Yes, it is resolved. At about 15:00 hrs IST on 16th November this was resolved for me.

 

Thank you.

Shyam

Hi @v-bacao-msft 

 

Yes, the issue is resolved. All my instances start working as expected from 15:30 hrs IST of 16th November.

 

Thank you,

Shyam

Hi v-bacao-msft

 

Dynamics365 data acquisition
Error control when Dynamics365 data acquisition fails

Forms → Dynamics365 data flow processing
Error control when Forms → Dynamics365 data flow processing fails

 

I thought it would not fail to list Dynamics365 records
I was creating Flow without entering the scope.

However, based on this matter, the list of Dynamics365 records can also be included in the scope.
I thought I should catch the error.

I would like to tell you which configuration of the execution conditions of the scope that catches anomalies should be set.
Although “failed to” is always checked,
I'm wondering if I should add "I've timed out".

Helpful resources

Announcements

Power Platform Connections - Episode 6 | March 23, 2023

Episode Six of Power Platform Connections sees David Warner and Hugo Bernier talk to talk to Business Applications MVP Shane Young, alongside the latest news, product updates, and community blogs.    Use the hashtag #PowerPlatformConnects on social media for a chance to have your work featured on the show!        Show schedule in this episode:  0:00 Cold Open 00:24 Show Intro 01:02 Shane Young Interview 22:00 Blogs & Articles 22:20 Integrate FullCalendar.io with Power Pages 23:50 Text Data 25:15 Zero to Hero Power Apps Saga 25:44 Parent Hub Association 26:33 Using Custom Values for OneNote Power Automate References​ 28:04 ​Dynamics Power Israel 28:44 Create Beautiful Canvas Apps in Dataverse for Teams ​ 30:36 Outro & Bloopers  Check out the blogs and articles featured in this week’s episode:   https://francomusso.com/integrate-fullcalendar-io-with-power-pages-from-json-basics-to-advanced-outp... @crmbizcoach https://yerawizardcat.com/text/ @YerAWizardCat www.fromzerotoheroes.com/mentorship ​ @thevictordantas https://www.expiscornovus.com/2023/03/16/parent-hub-association/ ​ @Expiscornovus https://lindsaytshelton.com/2023/03/15/the-painful-process-of-custom-values-for-onenote-power-automa... @lshelton_Tech https://never-stop-learning.de/create-beautiful-canvas-apps-in-dataverse-for-teams/ @MMe2K    Action requested: Feel free to provide feedback on how we can make our community more inclusive and diverse.  This episode premiered live on our YouTube at 12pm PST on Thursday 23rd March 2023.  Video series available at Power Platform Community YouTube channel.    Upcoming events:  Business Applications Launch – April 4th – Free and Virtual! M365 Conference - May 1-5th - Las Vegas Power Apps Developers Summit – May 19-20th - London European Power Platform conference – Jun. 20-22nd - Dublin Microsoft Power Platform Conference – Oct. 3-5th - Las Vegas  Join our Communities:  Power Apps Community Power Automate Community Power Virtual Agents Community Power Pages Community  If you’d like to hear from a specific community member in an upcoming recording and/or have specific questions for the Power Platform Connections team, please let us know. We will do our best to address all your requests or questions.   

Announcing | Super Users - 2023 Season 1

Super Users – 2023 Season 1    We are excited to kick off the Power Users Super User Program for 2023 - Season 1.  The Power Platform Super Users have done an amazing job in keeping the Power Platform communities helpful, accurate and responsive. We would like to send these amazing folks a big THANK YOU for their efforts.      Super User Season 1 | Contributions July 1, 2022 – December 31, 2022  Super User Season 2 | Contributions January 1, 2023 – June 30, 2023    Curious what a Super User is? Super Users are especially active community members who are eager to help others with their community questions. There are 2 Super User seasons in a year, and we monitor the community for new potential Super Users at the end of each season. Super Users are recognized in the community with both a rank name and icon next to their username, and a seasonal badge on their profile.    Power Apps  Power Automate  Power Virtual Agents  Power Pages  Pstork1*  Pstork1*  Pstork1*  OliverRodrigues  BCBuizer  Expiscornovus*  Expiscornovus*  ragavanrajan  AhmedSalih  grantjenkins  renatoromao    Mira_Ghaly*  Mira_Ghaly*      Sundeep_Malik*  Sundeep_Malik*      SudeepGhatakNZ*  SudeepGhatakNZ*      StretchFredrik*  StretchFredrik*      365-Assist*  365-Assist*      cha_cha  ekarim2020      timl  Hardesh15      iAm_ManCat  annajhaveri      SebS  Rhiassuring      LaurensM  abm      TheRobRush  Ankesh_49      WiZey  lbendlin      Nogueira1306  Kaif_Siddique      victorcp  RobElliott      dpoggemann  srduval      SBax  CFernandes      Roverandom  schwibach      Akser  CraigStewart      PowerRanger  MichaelAnnis      subsguts  David_MA      EricRegnier  edgonzales      zmansuri  GeorgiosG      ChrisPiasecki  ryule      AmDev  fchopo      phipps0218  tom_riha      theapurva  takolota     Akash17  momlo     BCLS776  Shuvam-rpa     rampprakash   ScottShearer     Rusk   ChristianAbata     cchannon   Koen5     a33ik        AaronKnox        Matren        Alex_10        Jeff_Thorpe        poweractivate        Ramole        DianaBirkelbach        DavidZoon        AJ_Z        PriyankaGeethik        BrianS        StalinPonnusamy        HamidBee        CNT        Anonymous_Hippo        Anchov        KeithAtherton        alaabitar        Tolu_Victor        KRider        sperry1625        IPC_ahaas      zuurg     rubin_boer     cwebb365       If an * is at the end of a user's name this means they are a Multi Super User, in more than one community. Please note this is not the final list, as we are pending a few acceptances.  Once they are received the list will be updated. 

Microsoft Power Platform | March 2023 Newsletter

Welcome to our March 2023 Newsletter, where we'll be highlighting the great work of our members within our Biz Apps communities, alongside the latest news, video releases, and upcoming events. If you're new to the community, be sure to subscribe to the News & Announcements and stay up to date with the latest news from our ever-growing membership network who find real "Power in the Community".        LATEST NEWS Power Platform Connections Check out Episode Five of Power Platform Connections, as David Warner II and Hugo Bernier chat with #PowerAutomate Vice President, Stephen Siciliano, alongside reviewing out the great work of Vesa Juvonen, Waldek Mastykarz, Maximilian Müller, Kristine Kolodziejski, Danish Naglekar, Cat Schneider, Victor Dantas, and many more.       Use the hashtag #PowerPlatformConnects on social media for a chance to have your work featured on the show!   Did you miss an episode?  Catch up now in the Community Connections Galleries Power Apps, Power Automate, Power Virtual Agents, Power Pages     Power Platform leading a new era of AI-generated low-code development.   **HOT OFF THE PRESS** Fantastic piece here by Charles Lamanna on how we're reinventing software development with Copilot in Power Platform to help you can build apps, flows, and bots with just a simple description! Click here to see the Product Blog         Copilot for Power Apps - Power CAT Live To follow on from Charles' blog, check out #PowerCATLive as Phil Topness gives Clay Wesener Wesner a tour of the capabilities of Copilot in Power Apps.           UPCOMING EVENTS   Modern Workplace Conference Check out the Power Platform and Microsoft 365 Modern Workplace Conference that returns face-to-face at the Espace St Martin in Paris on 27-28th March. The #MWCP23 will feature a wide range of expert speakers, including Nadia Yahiaoui, Amanda Sterner, Pierre-Henri, Chirag Patel, Chris Hoard, Edyta Gorzoń, Erika Beaumier, Estelle Auberix, Femke Cornelissen, Frank POIREAU, Gaëlle Moreau, Gilles Pommier, Ilya Fainberg, Julie Ecolivet, Mai-Lynn Lien, Marijn Somers, Merethe Stave, Nikki Chapple, Patrick Guimonet, Penda Sow, Pieter Op De Beéck, Rémi Riche, Robin Doudoux, Stéphanie Delcroix, Yves Habersaat and many more.  Click here to find out more and register today!     Business Applications Launch 2023 Join us on Tuesday 4th April 2023 for an in-depth look into the latest updates across Microsoft Power Platform and Microsoft Dynamics 365 that are helping businesses overcome their biggest challenges today. Find out about new features, capabilities, and best practices for connecting data to deliver exceptional customer experiences, collaborating and creating using AI-powered capabilities, driving productivity with automation, and building future growth with today’s leading technology. Click Here to Register Today!       Power Platform Conference 2023 We are so excited to see you for the Microsoft Power Platform Conference in Las Vegas October 3-5th, 2023! But first, let's take a look below at some fun moments from MPPC 2022 in Orlando Florida. 2023 sees guest speakers such as Charles Lamanna, Heather Cook, Julie Strauss, Nirav Shah, Ryan Cunningham, Sangya Singh, and many more taking part, so why not click the link below to register for the #PowerPlatformConf today! Vegas, baby! Click Here to Register Today!      COMMUNITY HIGHLIGHTS Check out our top Super and Community Users reaching new levels!  These hardworking members are posting, answering questions, kudos, and providing top solutions in their communities.   Power Apps:  Super Users:  @WarrenBelz  |  @iAm_ManCat  Community Users: @LaurensM | @Rusk | @RJM07    Power Automate:   Super Users: @abm  | @Expiscornovus | @RobElliott  Community Users:  @grantjenkins | @Chriddle    Power Virtual Agents:   Super Users: @Expiscornovus | @Pstork1  Community Users: @MisterBates | @Jupyter123 | Kunal K   Power Pages: Super Users:  @OliverRodriguesOliverRodrigues | @Mira_Ghaly  Community Users: @FubarFubar | @ianwukianwuk  LATEST PRODUCT BLOG ARTICLES  Power Apps Community Blog  Power Automate Community Blog  Power Virtual Agents Community Blog  Power Pages Community Blog  Check out 'Using the Community' for more helpful tips and information:  Power Apps, Power Automate, Power Virtual Agents, Power Pages 

Register now for the Business Applications Launch Event | Tuesday, April 4, 2023

Join us for an in-depth look into the latest updates across Microsoft Dynamics 365 and Microsoft Power Platform that are helping businesses overcome their biggest challenges today.   Find out about new features, capabilities, and best practices for connecting data to deliver exceptional customer experiences, collaborating, and creating using AI-powered capabilities, driving productivity with automation—and building towards future growth with today’s leading technology.   Microsoft leaders and experts will guide you through the full 2023 release wave 1 and how these advancements will help you: Expand visibility, reduce time, and enhance creativity in your departments and teams with unified, AI-powered capabilities.Empower your employees to focus on revenue-generating tasks while automating repetitive tasks.Connect people, data, and processes across your organization with modern collaboration tools.Innovate without limits using the latest in low-code development, including new GPT-powered capabilities.    Click Here to Register Today!    

Check out the new Power Platform Communities Front Door Experience!

We are excited to share the ‘Power Platform Communities Front Door’ experience with you!   Front Door brings together content from all the Power Platform communities into a single place for our community members, customers and low-code, no-code enthusiasts to learn, share and engage with peers, advocates, community program managers and our product team members. There are a host of features and new capabilities now available on Power Platform Communities Front Door to make content more discoverable for all power product community users which includes ForumsUser GroupsEventsCommunity highlightsCommunity by numbersLinks to all communities Users can see top discussions from across all the Power Platform communities and easily navigate to the latest or trending posts for further interaction. Additionally, they can filter to individual products as well.   Users can filter and browse the user group events from all power platform products with feature parity to existing community user group experience and added filtering capabilities.     Users can now explore user groups on the Power Platform Front Door landing page with capability to view all products in Power Platform.      Explore Power Platform Communities Front Door today. Visit Power Platform Community Front door to easily navigate to the different product communities, view a roll up of user groups, events and forums.

Microsoft Power Platform Conference | Registration Open | Oct. 3-5 2023

We are so excited to see you for the Microsoft Power Platform Conference in Las Vegas October 3-5 2023! But first, let's take a look back at some fun moments and the best community in tech from MPPC 2022 in Orlando, Florida.   Featuring guest speakers such as Charles Lamanna, Heather Cook, Julie Strauss, Nirav Shah, Ryan Cunningham, Sangya Singh, Stephen Siciliano, Hugo Bernier and many more.   Register today: https://www.powerplatformconf.com/   

Users online (3,602)