cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Problematic
Frequent Visitor

Office JS error : cannot run Excel script from power automate but works from Excel

HI

As the subject, I wrote a script  below 

 

function main(workbook: ExcelScript.Workbook) {

 

  let selectedSheet = workbook.getActiveWorksheet("ELE");
  selectedSheet.getRange("B3").copyFrom(selectedSheet.getRange("B3:J74"),ExcelScript.RangeCopyType.values, falsefalse);
}
it works well in the excel (through Office 365), but cannot work from power automate.  The error message is 
We were unable to run the script. Please try again.
"Office JS error: Line 4: Range copyFrom: There was an internal error while processing the request."
 
The purpose of this script as follows :
Data from Worksheet"ELE' is pulled out from another worksheet (raw_data) by using vlookup function.  In order to convert this excel file to PDF by Power Automate, I have to delete the worksheet (raw_data).  Before I delete the worksheet (raw_data), I have to change the data in Worksheet 'ELE' which are pulled out from Vlookup function to actual values.  That is the reason why I used 'copyForm' on the same worksheet. 
 
Could anyone suggest any solution ?
 
Thanks
 
1 ACCEPTED SOLUTION

Accepted Solutions

Instead of:

let selectedSheet = workbook.getActiveWorksheet("ELE");

 

Can you try this?

let selectedSheet = workbook.getWorksheet("ELE");

 

If this still doesn't solve the problem, can you share your clientRequestId so we can further troubleshoot? Yu can find it from the run history of your flow (you may need to expand the Run script action).

View solution in original post

18 REPLIES 18

Instead of:

let selectedSheet = workbook.getActiveWorksheet("ELE");

 

Can you try this?

let selectedSheet = workbook.getWorksheet("ELE");

 

If this still doesn't solve the problem, can you share your clientRequestId so we can further troubleshoot? Yu can find it from the run history of your flow (you may need to expand the Run script action).

i have similar problem but with another example:
Error: Office JS: Line 4: PivotTable removeDataHierarchy: There was an internal error while processing the request.

with:

 

function main(workbook: ExcelScript.Workbook) {
	let pivotTable1 = workbook.getPivotTable("PivotTable1");
	// Remove pivot field from a hierarchy in pivotTable1
	pivotTable1.removeDataHierarchy(pivotTable1.getDataHierarchy("Liczba PSD "));
}

 

any ideas?

and an additional question: is there any chance to refresh PivotTable with PowerBI (dataset) as a source with Sripts?
Doesn't work for me.

@ThunderDub 

 

To further troubleshoot the error you were seeing, can you share the clientRequestId? You can find it in the flow run history (you may need to expand the Run script block).

 

Regarding data refresh, unfortunately it's indeed not supported yet when running in Power Automate: https://docs.microsoft.com/en-us/office/dev/scripts/testing/power-automate-troubleshooting#data-refr...

 

clientRequestId: 6879e034-ff94-47df-bc50-0031c541f17c

@ThunderDub -

 

Based on the logs on our side, there seemed to be a "RefreshPivotTable" operation that caused your script to fail (as I mentioned in my last reply refresh is currently not supported when running in Power Automate).

 

Since your script doesn't explicitly refresh the pivot table, I'd assume it was probably somehow implicitly invoked by those pivot table operations in your script.

yup, it's a pivot table based on PowerBI dataset, so any change of shape equals refreshing...

 

still don't get why it works just via script and doesn't work via script started by flow 🙂

@ThunderDub 

 

Sorry for the confusion here! Office Scripts is still a very new feature, and dependencies are still being built to support it. Running it in the cloud in an unattended fashion (e.g., running in Power Automate) may pose even bigger challenges to us since many existing assumptions won't apply any more. We have been actively working with our partner teams to close all the gaps. The ability to refresh data connections has been one of the top items on our list.

 

Thanks for your patience!

Anonymous
Not applicable

hello

I need some help 

No pudimos ejecutar el script. Vuelve a intentarlo.
Error de Office JS: Line 4: Worksheet getRange: The request failed with status code of 504, error code UnknownError and the following error message:
clientRequestId: 11486d8b-5a47-461c-9135-a58f2927c751

 

line 4

 let range = Sheet1.getRange("AB1:AH1");
  range.setValues([["IDENTIFICACION""AREA""DIAS DE REGISTRO""FRECUENCIA""CONTAR CONTRATO""CONTAR SOLICITUD""NID"]]);
CarolZ
Frequent Visitor

Hi I also encounter same issue.

Additionally when I delete soem rows to see if script can be run from power automate with less rows, the new issue come out. Although everything works well if I just run the script at excel online. Appreciate if I can get some advise on this issue.

 

{

  "message": "We were unable to run the script. Please try again.\nOffice JS error: Line 78: Table addColumn: Timeout\r\nclient

 

 

CarolZ_0-1666622126288.png

{

  "message": "We were unable to run the script. Please try again.\nOffice JS error: Line 55: Worksheet getRange: The request failed with status code of 504, error code UnknownError and the following error message: \r\n

  

CarolZ_1-1666622169099.png

 

Hi the issue was resolved. pls ignore this post.

 Can report that workbook NamedItem is resulting in a 504, although it may have worked fine previously. 

 

function main(workbook: ExcelScript.Workbook) {
	
	// Construct talble reference
	const tabletest = workbook.getLastWorksheet().getTables()[0].getName() + "[#All]";
	
	// Get existing defined named reference
//	Push table into tableNames
	console.log(tabletest)
	console.log(workbook.getNamedItem('Files3d').getName());
	console.log(workbook.getNamedItem('Files3d').getWorksheet());

	let tableNames = workbook.getNamedItem('Files3d').getFormula().split("(")[2].split(")")[0].split(",");

	console.log(tableNames)
	tableNames.push(tabletest);

//	Set defined name with new formula

	workbook.getNamedItem('Files3d').setFormula('=DROP(HSTACK(' + tableNames.toString() + '),,1)')

}

 

Hi,

I have created the flow including Run script for creating a new pivotTable using loop. However we are getting error mentioned :- 

 "We were unable to run the script. Please try again.\nRuntime error: Line 52: Cannot read properties of undefined (reading 'setPosition')\r\nclientRequestId: fc90eda6-59f7-46fc-bc47-f349ac3b2b3c",
  "logs": []
Please advise how to fix the issue asap
 
Thanks,
Abhishek

Hi,

 

I have fixed the issue. Please ignore this. Thanks. 🙂

Anonymous
Not applicable

We were unable to run the script. Please try again.
Office JS error: Line 12: Table addRows: The request is aborted.
clientRequestId: 2b72c779-4009-411d-9970-a137061ad86d

Hi , could you please have a look at my script too? i mean when i run it manually in excel it works, but when i execute it during a flow , the following error is returned

"We were unable to run the script. Please try again.\nRuntime error: Line 38: Cannot read properties of undefined (reading 'getRange')\r\nclientRequestId: 479c647f-df3b-42fb-94ce-8cee0a5ab6c8"

@Anonmous_AC 

Do you have any part of the script referencing an Active Worksheet/Cell or something similar?

 

Any references to an Active Worksheet/Cell/Table will need to be made explicit using the Worksheet/Cell/Table name to run it from a flow where there is not an active user with a workbook sheet open or with a cell selected.

DavidAston
Regular Visitor

Like everyone here I too am having script issues,

my script works perfectly in excel, but when i try and run it in PowerAutomate i get the following error

 

We were unable to run the script. Please try again.
Office JS error: Line 10: Range setFormulasLocal: The argument is invalid or missing or has an incorrect format.
clientRequestId: 9682fdcb-98ed-4efd-aebc-80b060b11af1

 

the script is as follows

function main(workbook: ExcelScript.Workbook) {
    let selectedSheet = workbook.getActiveWorksheet("Page 1");
    // Set range W1:AD1 on selectedSheet
    selectedSheet.getRange("W1:AD1").setValues([["Validate","dateonly","maxtime","mintime","timeonsite","Countif","tot","UID"]]);
    // Add a new table at range A1:AD10000 on selectedSheet
    let newTable = workbook.addTable(selectedSheet.getRange("A1:AD20000"), true);
    // Table style applied on table newTable
    newTable.setPredefinedTableStyle("TableStyleLight9");
    // Set range W2:AD2 on selectedSheet
    selectedSheet.getRange("W2:AD2").setFormulasLocal([["=SUMPRODUCT(([@[Engineer In Date & Time By Agent]]<FILTER([Engineer Out Date &Time By Agent],[Engineer Name]=[@[Engineer Name]]))*([@[Engineer Out Date &Time By Agent]]>FILTER([Engineer In Date & Time By Agent],[Engineer Name]=[@[Engineer Name]])))>1", "=DATEVALUE(TEXT([@[Engineer Out Date &Time By Agent]],\"DD-MM-YY\"))", "=MAXIFS([Engineer Out Date &Time By Agent],[Engineer Name],[@[Engineer Name]],[dateonly],[@dateonly])", "=MINIFS([Engineer In Date & Time By Agent],[Engineer Name],[@[Engineer Name]],[dateonly],[@dateonly])", "=TEXT([@maxtime]-[@mintime],\"h:mm\")","=COUNTIFS([dateonly],[@dateonly],[Engineer Name],[@[Engineer Name]],[Project Reference],[@[Project Reference]],[State],[@State])","=[@timeonsite]/[@Countif]","=ROW(RC)"]]);
    // Set format for range X2:X20000 on selectedSheet
    selectedSheet.getRange("X2:X20000").setNumberFormatLocal("m/d/yy");
    // Set format for range Y:Y on selectedSheet
    selectedSheet.getRange("Y:Y").setNumberFormatLocal("h:mm");
    // Set format for range Z2:Z20000 on selectedSheet
    selectedSheet.getRange("Z2:Z20000").setNumberFormatLocal("h:mm");
    // Set format for range AA2:AA20000 on selectedSheet
    selectedSheet.getRange("AA2:AA20000").setNumberFormatLocal("h:mm");
    // Set format for range AC:AC on selectedSheet
    selectedSheet.getRange("AC:AC").setNumberFormatLocal("h:mm");
}
help please 

@DavidAston 

You and likely others have references to an Active Worksheet when you need to make that reference the worksheet by name...
let selectedSheet = workbook.getActiveWorksheet("Page 1")

Should be
let selectedSheet = workbook.getWorksheet("InsertWorkSheetName");

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (2,148)