cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
hilary_stoupa
Kudo Kingpin
Kudo Kingpin

Prevent unused Flows from being turned off

Is there a way to prevent Flow that are rarely used from being turned off? I have a rarely used but still business critical process where there was a warning email and then the the Flow was disabled:

We noticed that your flow has not run at all in the past 90 days. We disabled it on ...

The email address for this account is not one that I check frequently, so I had not seen the warning. Regardless, this seems like something I should be able to disable.

I did see a suggestion to create an admin Flow that checks Flows to see if they are on, but I consider that to be a bit of a clunky work around.

27 REPLIES 27
gabibalaban
Multi Super User
Multi Super User

Hi @hilary_stoupa,

 

I wonder if is not a solution to create another flow with Office365Outlook Trigger - "When a new email arrives" filtered by subject (and take from a previous email the keywords that you need to uniquely identify this kind of warning emails)  and eventually by sender and add only a simply action Office365Outlook - Send an email to be notified about the warning. 

It is just a thought.

Hope it helps !

MortenT
Advocate I
Advocate I

I really have a WF (many of them) that is used as "tool" to clean metadata, that can run on demand by Key users. But It is not something, that needs to run very offen. 

 

I want to repeat the question: 

"How to reprevent unused Flows to be disabled".

/Morten

hilary_stoupa
Kudo Kingpin
Kudo Kingpin

Another concern - what if the Flow is set to run every 4 months and is a scheduled Flow? Does that get turned off too?

Anonymous
Not applicable

Is this any new feature update from Microsoft ? we have been receiving emails about few flow which runs once in year or so due to the business requirements..is there any way to exclude flows from auto disabling?  

hilary_stoupa
Kudo Kingpin
Kudo Kingpin

I also just had a button Flow turned off. This is pretty frustrating. I am not sure why Microsoft feels that they should automatically determine whether or not I am using something, simply because I am not using it as often as they think I should.

Francis
Advocate II
Advocate II

I too have a super important annual process supported by Flow. It doesn't make sense at all to disable it automatically after 90 days!

hilary_stoupa
Kudo Kingpin
Kudo Kingpin

I've also found that when I  turn a Flow back on, unless it gets used, it just gets turned off again in a week. So it isn't like turning it back on gets me another 90 days. I can't go mimic the action that would cause it to run - this is a production environment.

hilary_stoupa
Kudo Kingpin
Kudo Kingpin

VictorFerris
New Member

Came here to add my 2 cents. I have a manual flow that is only used in case of emergency when the senior system administrator (Me) is out of the office. This flow allows my less technical team to quickly spin up a new SQL database in the event of replication failure so my thousands of users (and business) don't come to a screeching halt. The fact that this flow is disabled weekly and the only notification is an email to the only person that won't actually use the flow is very frustrating. This issue is forcing me to find a new solution entirely. 

hilary_stoupa
Kudo Kingpin
Kudo Kingpin

Oh and it looks like it may be dependent on tenant. On a client tenant, the messages say:

We noticed that your flow has not run at all in the past 90 days.

On my company's tenant, we only get 60 days:

We noticed that your flow has not run at all in the past 60 days.

EDITED TO ADD: looks like my client's tenant has caught up with mine, and they are now getting turned off at 60 days too. So, rather than make it better by allowing me to "opt out" of this behavior for some Flows, they are actually making worse.

🙂

MortenT
Advocate I
Advocate I

Hi all Power users

 

This link show the new limit (or anyway new to me)
https://docs.microsoft.com/en-us/power-automate/limits-and-config#expiration-limits

 

"To keep the flow active you may need to adjust your trigger or purchase a standalone Power Automate license plan"

 

So if we don't want these triggers to time-out, we need to buy a standalone Power license plan.

 

Anyone, knows how to find the price for such a plan?

https://flow.microsoft.com/en-us/pricing/ has the pricing. I know this wasn't a limit when I first created these Flows - so this is super annoying. But thanks for directing me to the documentation.

CManske
New Member

Just schedule to run monthly (or daily) and have a conditional check for the month or date needed.

 

if formatDateTime(utcnow(),'MMMM') = April ...

The scheduled trigger with a condition is the definite workaround, but it really makes no sense to me for Microsoft to enact this.  Really if more people use that workaround it is just going to increase the load for Microsoft.  (example: I used to have 10 automated trigger flows that run once each every 4 to 6 months when the trigger is enacted, but now I have 10 scheduled flows that run weekly or daily and check for the condition to be met)  And of course this helps with automated and scheduled flows, but will not help with an instant cloud flow from a button, for instance.

A choice that could only have been made to try and drive revenue from Power Automate licensing, but this really seems to be NOT the way at least for me.

I have this kind of trigger for monthly and yearly tasks. Monthly is ok but not yearly.

vasoftball5
Regular Visitor

From the discussion - it seems the best option is to schedule a flow to run weekly, to initiate the flow that needs to stay alive. You can pass a parameter into the flow call, which means your critical flow can simply check for that  parameter, and exit when it exists. Rather simple approach and workable. I don't really understand the purpose of automatically disabling a dormant flow. It's not like doing so improves Azure performance (it's DORMANT).  SMH

Additonally - your "tapper" flow can be modified to call as many flows as needed to be kept alive. You will just need to modify the subsequent flows to check for the parameter and exit. But you'd at least have a single point of kicking off the keep-alive flow.

Dji
New Member

I found a new action possible trough the "basic" power automate, the action is "activate flow". Trough that new action, i've input all my flows that are possible to be deactivated (dormant). I run that one on a monthly basis in order to keep everything alive.

 

Hope it might help others

I believe this is currently the best option to address a stupid situation. Thanks, @CManske , for posting it.

samsa17
New Member

I've tried creating a Monthly scheduled flow to list all the flows and turn them on. It's running successfully but it doesn't seem to be turning them on. I'm logged in as the Flow creator user/owner.  My flow is below. 

 

I deliberately turned off 2 flows to see what would happen. But it doesn't turn them on. Any ideas what I might be doing wrong?

 

Thanks,

Sam

 

samsa17_0-1674518884111.png

 

Helpful resources

Announcements

Take a short Community User Survey | Help us make your experience better!

To ensure that we are providing the best possible experience for Community members, we want to hear from you!    We value your feedback! As part of our commitment to enhancing your experience, we invite you to participate in a brief 15-question survey. Your insights will help us improve our services and better serve the community.    👉Community User Survey    Thank you for being an essential part of our community!    Power Platform Engagement Team  

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Calling all User Group Leaders and Super Users! Mark Your Calendars for the next Community Ambassador Call on May 9th!

This month's Community Ambassador call is on May 9th at 9a & 3p PDT. Please keep an eye out in your private messages and Teams channels for your invitation. There are lots of exciting updates coming to the Community, and we have some exclusive opportunities to share with you! As always, we'll also review regular updates for User Groups, Super Users, and share general information about what's going on in the Community.     Be sure to register & we hope to see all of you there!

April 2024 Community Newsletter

We're pleased to share the April Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzDeenujialexander2523ragavanrajanLaurensMManishSolankiMattJimisonLucas001AmikcapuanodanilostephenrobertOliverRodriguestimlAndrewJManikandanSFubarmmbr1606VishnuReddy1997theMacResolutionsVishalJhaveriVictorIvanidzejsrandhawahagrua33ikExpiscornovusFGuerrero1PowerAddictgulshankhuranaANBExpiscornovusprathyooSpongYeNived_Nambiardeeksha15795apangelesGochixgrantjenkinsvasu24Mfon   LATEST NEWS   Business Applications Launch Event - On Demand In case you missed the Business Applications Launch Event, you can now catch up on all the announcements and watch the entire event on-demand inside Charles Lamanna's latest cloud blog.   This is your one stop shop for all the latest Copilot features across Power Platform and #Dynamics365, including first-hand looks at how companies such as Lenovo, Sonepar, Ford Motor Company, Omnicom and more are using these new capabilities in transformative ways. Click the image below to watch today!   Power Platform Community Conference 2024 is here! It's time to look forward to the next installment of the Power Platform Community Conference, which takes place this year on 18-20th September 2024 at the MGM Grand in Las Vegas!   Come and be inspired by Microsoft senior thought leaders and the engineers behind the #PowerPlatform, with Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab and Leon Welicki already confirmed to speak. You'll also be able to learn from industry experts and Microsoft MVPs who are dedicated to bridging the gap between humanity and technology. These include the likes of Lisa Crosbie, Victor Dantas, Kristine Kolodziejski, David Yack, Daniel Christian, Miguel Félix, and Mats Necker, with many more to be announced over the coming weeks.   Click here to watch our brand-new sizzle reel for #PPCC24 or click the image below to find out more about registration. See you in Vegas!       Power Up Program Announces New Video-Based Learning Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram. These include a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the image below to find out more!   UPCOMING EVENTS Microsoft Build - Seattle and Online - 21-23rd May 2024 Taking place on 21-23rd May 2024 both online and in Seattle, this is the perfect event to learn more about low code development, creating copilots, cloud platforms, and so much more to help you unleash the power of AI.   There's a serious wealth of talent speaking across the three days, including the likes of Satya Nadella, Amanda K. Silver, Scott Guthrie, Sarah Bird, Charles Lamanna, Miti J., Kevin Scott, Asha Sharma, Rajesh Jha, Arun Ulag, Clay Wesener, and many more.   And don't worry if you can't make it to Seattle, the event will be online and totally free to join. Click the image below to register for #MSBuild today!   European Collab Summit - Germany - 14-16th May 2024 The clock is counting down to the amazing European Collaboration Summit, which takes place in Germany May 14-16, 2024. #CollabSummit2024 is designed to provide cutting-edge insights and best practices into Power Platform, Microsoft 365, Teams, Viva, and so much more. There's a whole host of experts speakers across the three-day event, including the likes of Vesa Juvonen, Laurie Pottmeyer, Dan Holme, Mark Kashman, Dona Sarkar, Gavin Barron, Emily Mancini, Martina Grom, Ahmad Najjar, Liz Sundet, Nikki Chapple, Sara Fennah, Seb Matthews, Tobias Martin, Zoe Wilson, Fabian Williams, and many more.   Click the image below to find out more about #ECS2024 and register today!     Microsoft 365 & Power Platform Conference - Seattle - 3-7th June If you're looking to turbo boost your Power Platform skills this year, why not take a look at everything TechCon365 has to offer at the Seattle Convention Center on June 3-7, 2024.   This amazing 3-day conference (with 2 optional days of workshops) offers over 130 sessions across multiple tracks, alongside 25 workshops presented by Power Platform, Microsoft 365, Microsoft Teams, Viva, Azure, Copilot and AI experts. There's a great array of speakers, including the likes of Nirav Shah, Naomi Moneypenny, Jason Himmelstein, Heather Cook, Karuana Gatimu, Mark Kashman, Michelle Gilbert, Taiki Y., Kristi K., Nate Chamberlain, Julie Koesmarno, Daniel Glenn, Sarah Haase, Marc Windle, Amit Vasu, Joanne C Klein, Agnes Molnar, and many more.   Click the image below for more #Techcon365 intel and register today!     For more events, click the image below to visit the Microsoft Community Days website.      

Tuesday Tip | Update Your Community Profile Today!

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   We're excited to announce that updating your community profile has never been easier! Keeping your profile up to date is essential for staying connected and engaged with the community.   Check out the following Support Articles with these topics: Accessing Your Community ProfileRetrieving Your Profile URLUpdating Your Community Profile Time ZoneChanging Your Community Profile Picture (Avatar)Setting Your Date Display Preferences Click on your community link for more information: Power Apps, Power Automate, Power Pages, Copilot Studio   Thank you for being an active part of our community. Your contributions make a difference! Best Regards, The Community Management Team

Users online (2,839)