cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
hilary_stoupa
Kudo Kingpin
Kudo Kingpin

Prevent unused Flows from being turned off

Is there a way to prevent Flow that are rarely used from being turned off? I have a rarely used but still business critical process where there was a warning email and then the the Flow was disabled:

We noticed that your flow has not run at all in the past 90 days. We disabled it on ...

The email address for this account is not one that I check frequently, so I had not seen the warning. Regardless, this seems like something I should be able to disable.

I did see a suggestion to create an admin Flow that checks Flows to see if they are on, but I consider that to be a bit of a clunky work around.

27 REPLIES 27
gabibalaban
Multi Super User
Multi Super User

Hi @hilary_stoupa,

 

I wonder if is not a solution to create another flow with Office365Outlook Trigger - "When a new email arrives" filtered by subject (and take from a previous email the keywords that you need to uniquely identify this kind of warning emails)  and eventually by sender and add only a simply action Office365Outlook - Send an email to be notified about the warning. 

It is just a thought.

Hope it helps !

MortenT
Advocate I
Advocate I

I really have a WF (many of them) that is used as "tool" to clean metadata, that can run on demand by Key users. But It is not something, that needs to run very offen. 

 

I want to repeat the question: 

"How to reprevent unused Flows to be disabled".

/Morten

hilary_stoupa
Kudo Kingpin
Kudo Kingpin

Another concern - what if the Flow is set to run every 4 months and is a scheduled Flow? Does that get turned off too?

Anonymous
Not applicable

Is this any new feature update from Microsoft ? we have been receiving emails about few flow which runs once in year or so due to the business requirements..is there any way to exclude flows from auto disabling?  

hilary_stoupa
Kudo Kingpin
Kudo Kingpin

I also just had a button Flow turned off. This is pretty frustrating. I am not sure why Microsoft feels that they should automatically determine whether or not I am using something, simply because I am not using it as often as they think I should.

Francis
Advocate II
Advocate II

I too have a super important annual process supported by Flow. It doesn't make sense at all to disable it automatically after 90 days!

hilary_stoupa
Kudo Kingpin
Kudo Kingpin

I've also found that when I  turn a Flow back on, unless it gets used, it just gets turned off again in a week. So it isn't like turning it back on gets me another 90 days. I can't go mimic the action that would cause it to run - this is a production environment.

hilary_stoupa
Kudo Kingpin
Kudo Kingpin

VictorFerris
New Member

Came here to add my 2 cents. I have a manual flow that is only used in case of emergency when the senior system administrator (Me) is out of the office. This flow allows my less technical team to quickly spin up a new SQL database in the event of replication failure so my thousands of users (and business) don't come to a screeching halt. The fact that this flow is disabled weekly and the only notification is an email to the only person that won't actually use the flow is very frustrating. This issue is forcing me to find a new solution entirely. 

hilary_stoupa
Kudo Kingpin
Kudo Kingpin

Oh and it looks like it may be dependent on tenant. On a client tenant, the messages say:

We noticed that your flow has not run at all in the past 90 days.

On my company's tenant, we only get 60 days:

We noticed that your flow has not run at all in the past 60 days.

EDITED TO ADD: looks like my client's tenant has caught up with mine, and they are now getting turned off at 60 days too. So, rather than make it better by allowing me to "opt out" of this behavior for some Flows, they are actually making worse.

🙂

MortenT
Advocate I
Advocate I

Hi all Power users

 

This link show the new limit (or anyway new to me)
https://docs.microsoft.com/en-us/power-automate/limits-and-config#expiration-limits

 

"To keep the flow active you may need to adjust your trigger or purchase a standalone Power Automate license plan"

 

So if we don't want these triggers to time-out, we need to buy a standalone Power license plan.

 

Anyone, knows how to find the price for such a plan?

https://flow.microsoft.com/en-us/pricing/ has the pricing. I know this wasn't a limit when I first created these Flows - so this is super annoying. But thanks for directing me to the documentation.

CManske
New Member

Just schedule to run monthly (or daily) and have a conditional check for the month or date needed.

 

if formatDateTime(utcnow(),'MMMM') = April ...

The scheduled trigger with a condition is the definite workaround, but it really makes no sense to me for Microsoft to enact this.  Really if more people use that workaround it is just going to increase the load for Microsoft.  (example: I used to have 10 automated trigger flows that run once each every 4 to 6 months when the trigger is enacted, but now I have 10 scheduled flows that run weekly or daily and check for the condition to be met)  And of course this helps with automated and scheduled flows, but will not help with an instant cloud flow from a button, for instance.

A choice that could only have been made to try and drive revenue from Power Automate licensing, but this really seems to be NOT the way at least for me.

I have this kind of trigger for monthly and yearly tasks. Monthly is ok but not yearly.

vasoftball5
Regular Visitor

From the discussion - it seems the best option is to schedule a flow to run weekly, to initiate the flow that needs to stay alive. You can pass a parameter into the flow call, which means your critical flow can simply check for that  parameter, and exit when it exists. Rather simple approach and workable. I don't really understand the purpose of automatically disabling a dormant flow. It's not like doing so improves Azure performance (it's DORMANT).  SMH

Additonally - your "tapper" flow can be modified to call as many flows as needed to be kept alive. You will just need to modify the subsequent flows to check for the parameter and exit. But you'd at least have a single point of kicking off the keep-alive flow.

Dji
New Member

I found a new action possible trough the "basic" power automate, the action is "activate flow". Trough that new action, i've input all my flows that are possible to be deactivated (dormant). I run that one on a monthly basis in order to keep everything alive.

 

Hope it might help others

I believe this is currently the best option to address a stupid situation. Thanks, @CManske , for posting it.

samsa17
New Member

I've tried creating a Monthly scheduled flow to list all the flows and turn them on. It's running successfully but it doesn't seem to be turning them on. I'm logged in as the Flow creator user/owner.  My flow is below. 

 

I deliberately turned off 2 flows to see what would happen. But it doesn't turn them on. Any ideas what I might be doing wrong?

 

Thanks,

Sam

 

samsa17_0-1674518884111.png

 

Helpful resources

Announcements

Celebrating the June Super User of the Month: Markus Franz

Markus Franz is a phenomenal contributor to the Power Apps Community. Super Users like Markus inspire others through their example, encouragement, and active participation.    The Why: "I do this to help others achieve what they are trying to do. As a total beginner back then without IT background I know how overwhelming things can be, so I decided to jump in and help others. I also do this to keep progressing and learning myself." Thank you, Markus Franz, for your outstanding work! Keep inspiring others and making a difference in the community! 🎉  Keep up the fantastic work! 👏👏 Markus Franz | LinkedIn  Power Apps: mmbr1606  

Copilot Cookbook Challenge | Week 1 Results | Win Tickets to the Power Platform Conference

We are excited to announce the "The Copilot Cookbook Community Challenge is a great way to showcase your creativity and connect with others. Plus, you could win tickets to the Power Platform Community Conference in Las Vegas in September 2024 as an amazing bonus.   Two ways to enter: 1. Copilot Studio Cookbook Gallery:  https://aka.ms/CS_Copilot_Cookbook_Challenge 2. Power Apps Copilot Cookbook Gallery: https://aka.ms/PA_Copilot_Cookbook_Challenge   There will be 5 chances to qualify for the final drawing: Early Bird Entries: March 1 - June 2Week 1: June 3 - June 9Week 2: June 10 - June 16Week 3: June 17 - June 23Week 4: June 24 - June 30     At the end of each week, we will draw 5 random names from every user who has posted a qualifying Copilot Studio template, sample or demo in the Copilot Studio Cookbook or a qualifying Power Apps Copilot sample or demo in the Power Apps Copilot Cookbook. Users who are not drawn in a given week will be added to the pool for the next week. Users can qualify more than once, but no more than once per week. Four winners will be drawn at random from the total qualifying entrants. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once. If they are drawn multiple times, another user will be drawn at random. Prizes:  One Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value, does not include travel, lodging, or any other expenses) Winners are also eligible to do a 10-minute presentation of their demo or solution in a community solutions showcase at the event. To qualify for the drawing, templates, samples or demos must be related to Copilot Studio or a Copilot feature of Power Apps, Power Automate, or Power Pages, and must demonstrate or solve a complete unique and useful business or technical problem. Power Automate and Power Pagers posts should be added to the Power Apps Cookbook. Final determination of qualifying entries is at the sole discretion of Microsoft. Weekly updates and the Final random winners will be posted in the News & Announcements section in the communities on July 29th, 2024. Did you submit entries early?  Early Bird Entries March 1 - June 2:  If you posted something in the "early bird" time frame complete this form: https://aka.ms/Copilot_Challenge_EarlyBirds if you would like to be entered in the challenge.   Week 1 Results:  Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1.  @Mathieu_Paris 1.   @SpongYe 2.  @Dhanush 2.   @Deenuji 3.  n/a3.   @Nived_Nambiar  4.  n/a4.   @ManishSolanki 5.  n/a5.    n/a

Your Moment to Shine: 2024 PPCC’s Got Power Awards Show

For the third year, we invite you, our talented community members, to participate in the grand 2024 Power Platform Community Conference's Got Power Awards. This event is your opportunity to showcase solutions that make a significant business impact, highlight extensive use of Power Platform products, demonstrate good governance, or tell an inspirational story. Share your success stories, inspire your peers, and show off some hidden talents.  This is your time to shine and bring your creations into the spotlight!  Make your mark, inspire others and leave a lasting impression. Sign up today for a chance to showcase your solution and win the coveted 2024 PPCC’s Got Power Award. This year we have three categories for you to participate in: Technical Solution Demo, Storytelling, and Hidden Talent.      The Technical solution demo category showcases your applications, automated workflows, copilot agentic experiences, web pages, AI capabilities, dashboards, and/or more. We want to see your most impactful Power Platform solutions!  The Storytelling category is where you can share your inspiring story, and the Hidden Talent category is where your talents (such as singing, dancing, jump roping, etc.) can shine! Submission Details:  Fill out the submission form https://aka.ms/PPCCGotPowerSignup by July 12th with details and a 2–5-minute video showcasing your Solution impact. (Please let us know you're coming to PPCC, too!)After review by a panel of Microsoft judges, the top storytellers will be invited to present a virtual demo presentation to the judges during early August. You’ll be notified soon after if you have been selected as a finalist to share your story live at PPCC’s Got Power!  The live show will feature the solution demos and storytelling talents of the top contestants, winner announcements, and the opportunity to network with your community.  It's not just a showcase for technical talent and storytelling showmanship, show it's a golden opportunity to make connections and celebrate our Community together! Let's make this a memorable event! See you there!   Mark your calendars! Date and Time: Thursday, Sept 19th Location: PPCC24 at the MGM Grand, Las Vegas, NV 

Tuesday Tip | Accepting Solutions

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   To enhance our collaborative environment, it's important to acknowledge when your question has been answered satisfactorily. Here's a quick guide on how to accept a solution to your questions: Find the Helpful Reply: Navigate to the reply that has effectively answered your question.Accept as Solution: Look for the "Accept as Solution" button or link, usually located at the bottom of the reply.Confirm Your Selection: Clicking this button may prompt you for confirmation. Go ahead and confirm that this is indeed the solution.Acknowledgment: Once accepted, the reply will be highlighted, and the original post will be marked as "Solved". This helps other community members find the same solution quickly. By marking a reply as an accepted solution, you not only thank the person who helped you but also make it easier for others with similar questions to find answers. Let's continue to support each other by recognizing helpful contributions. 

Reminder: To register for the Community Ambassador Call on June 13th

Calling all Super Users & User Group Leaders   Reminder: To register for the Community Ambassador Call on June 13th—for an exclusive event for User Group Leaders and Super Users! This month is packed with exciting updates and activities within our community.   What's Happening: Community Updates: We'll share the latest developments and what's new in our vibrant community.Special Guest Speaker: Get ready for an insightful talk and live demo of Microsoft Copilot Studio templates by our special guest.Regular Updates: Stay informed with our routine updates for User Groups and Super Users.Community Insights: We'll provide general information about ongoing and upcoming community initiatives. Don't Miss Out: Register Now: Choose the session that fits your schedule best.Check your private messages or Super User Forum for registration links. We're excited to connect with you and continue building a stronger community together.   See you at the call!  

May 2024 Community Newsletter

It's time for the May Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.        COMMUNITY HIGHLIGHTS Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzcreativeopinionExpiscornovusFubarAmikNived_NambiarPstork1OliverRodriguesmmbr1606ManishSolankiMattJimisonragavanrajantimlSudeepGhatakNZrenatoromaoLucas001iAm_ManCatAlexEncodianfernandosilvaOOlashynJmanriqueriosChriddle  BCBuizerExpiscornovus  a33ikBCBuizer  SebSDavid_MA  dpoggermannPstork1     LATEST NEWS   We saw a whole host of amazing announcements at this year's #MSBuild, so we thought we'd share with you a bite sized breakdown of the big news via blogs from Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab, and ✊🏾Justin Graham :   New ways of development with copilots and Microsoft Power PlatformRevolutionize the way you work with Automation and AIPower Apps is making it easier for developers to build with Microsoft Copilot and each otherCopilot in Microsoft Fabric is now generally available in Power BIUnlock new levels of productivity with Microsoft Dataverse and Microsoft Copilot StudioMicrosoft Copilot Studio: Building copilots with agent capabilitiesMicrosoft Power Pages is bringing the new standard in secure, AI-powered capabilities   If you'd like to relive some of the highlights from Microsoft Build 2024, click the image below to watch a great selection of on-demand Keynotes and sessions!         WorkLab Podcast with Charles Lamanna   Check out the latest episode of the WorkLab podcast with CVP of Business Apps and Platforms at Microsoft, Charles Lamanna, as he explains the ever-expanding evolution of Copilot, and how AI is offering new opportunities for business leaders. Grab yourself a coffee and click the image below to take a listen.       Event Recap: European Collaboration and Cloud Summits 2024   Click the image below to read a great recap by Mark Kashman about the recent European Collaboration Summit and European Cloud Summit held in Germany during May 2024. Great work everybody!       UPCOMING EVENTS European Power Platform Conference - SOLD OUT! Congrats to everyone who managed to grab a ticket for the now SOLD OUT European Power Platform Conference, which takes place in beautiful Brussels, Belgium, on 11-13th June. With a great keynote planned from Ryan Cunningham and Sangya Singh, plus expert sessions from the likes of Aaron Rendell, Amira Beldjilali, Andrew Bibby, Angeliki Patsiavou, Ben den Blanken, Cathrine Bruvold, Charles Sexton, Chloé Moreau, Chris Huntingford, Claire Edgson, Damien Bird, Emma-Claire Shaw, Gilles Pommier, Guro Faller, Henry Jammes, Hugo Bernier, Ilya Fainberg, Karen Maes, Lindsay Shelton, Mats Necker, Negar Shahbaz, Nick Doelman, Paulien Buskens, Sara Lagerquist, Tricia Sinclair, Ulrikke Akerbæk, and many more, it looks like the E in #EPPC24 stands for Epic!   Click the image below for a full run down of the exciting sessions planned, and remember, you'll need to move quickly for tickets to next year's event!       AI Community Conference - New York - Friday 21st June Check out the AI Community Conference, which takes place at the Microsoft Corporate building on Friday 21st June at 11 Times Square in New York City. Here, you'll have the opportunity to explore the latest trends and breakthroughs in AI technology alongside fellow enthusiasts and experts, with speakers on the day including Arik Kalininsky, Sherry Xu, Xinran Ma, Jared Matfess, Mihail Mateev, Andrei Khaidarov, Ruven Gotz, Nick Brattoli, Amit Vasu, and more. So, whether you're a seasoned professional or just beginning your journey into AI, click the image below to find out more about this exciting NYC event.       TechCon365 & Power Platform Conference - D.C. - August 12-16th ** EARLY BIRD TICKETS END MAY 31ST! ** Today's the perfect time to grab those early bird tickets for the D.C. TechCon365 & PWRCON Conference at the Walter E Washington Center on August 12-16th! Featuring the likes of Tamara Bredemus, Sunny Eltepu, Lindsay Shelton, Brian Alderman, Daniel Glenn, Julie Turner, Jim Novak, Laura Rogers, Microsoft MVP, John White, Jason Himmelstein, Luc Labelle, Emily Mancini, MVP, UXMC, Fabian Williams, Emma Wiehe, Amarender Peddamalku, and many more, this is the perfect event for those that want to gain invaluable insights from industry experts. Click the image below to grab your tickets today!         Power Platform Community Conference - Sept. 18-20th 2024 Check out some of the sessions already planned for the Power Platform Community Conference in Las Vegas this September. Holding all the aces we have Kristine Kolodziejski, Lisa Crosbie, Daniel Christian, Dian Taylor, Scott Durow🌈, David Yack, Michael O. and Aiden Kaskela, who will be joining the #MicrosoftCommunity for a series of high-stakes sessions! Click the image below to find out more as we go ALL-IN at #PPCC24!       For more events, click the image below to visit the Community Days website.    

Users online (3,801)