Showing results for 
Search instead for 
Did you mean: 
Frequent Visitor

Share My Flow with a Group - Concerned about the FULL ACCESS pop-up


I have created a flow that uses the following connectors:

  • FORMS (Ended up sharing from My Forms with the Group - saved on my OneDrive - because it was not an option to select from Teams Flow - ALSO, have it on a Channel Tab)

  • EXCEL (filling in form responses - saved to my oneDrive and shared with Group)

  • TEAMS (Post to Channel that group uses on a bigger Team)

  • GROUP EVENT (add a calendar event based on form entry on the Group Calendar)

  • EMAIL ---------deleted because it didn't switch to other users credentials and no permission to send as someone else. Also worried about the FULL ACCESS portion of sharing

  • NOTIFICATION (sends email to me if any step fails) - I was going to have a branch so that it sends a mobile notification if it is successful but I couldn't figure out how to add the phone number (BONUS QUESTION)

The tests work fine. However, the flow is not triggered when anyone else fills out the form. So, I figured that I needed to SHARE. When I go to share with the Group, it says that it will give FULL ACCESS. I take warning seriously. I tried to research and found how to share but NONE address what is meant by FULL ACCESS. Is it just to the specific targeted items in this flow (no problem) OR is it to the entire app as I would have access (all of my files, etc)?

FULL ACCESS to ... ?FULL ACCESS to ... ?

@ScottShearer, you have answered other questions - do you know the answer to this?

Thank you!

Continued Contributor
Continued Contributor

Hello @SeaLee ,


When you share a FLOW to users they will have entire access of your flow that means they can modify, run, see Run history, change actions and connections. In short everything you are able to do with flow that they can do with that flow. 


Another concept is adding users as RUN-ONLY , this means if you want to allow certain users permission to RUN a flow and do not want to give any other permissions than you can add RUN-Only users. 


I am not sure any other relevant document better than Microsoft Doc's for this topic. Please refer


Let me know if you have any questions.




(Please mark it resolved, if it helps you)



Hello @anupam8555 


I did think to use 'run only' but it didn't seem to be an option under Share since my flow is automatic and not manual.

shareFlow 2020-08-10 074639.jpg

Thank you for your explanation.



I just went ahead and shared. It still doesn't work for anyone else.

It is showing up as a Team Flow.


First, I shared to group. A member of the group submitted a form (this is the initial trigger) and nothing happened (it didn't even show up as a new entry in Forms).

Next, I shared to member as an individual. Did another form entry and nothing.


Any ideas?

Hi @SeaLee ,


Can you please share some of details of flow like how you are triggering up ? 





Hello. I did the sharing but it wouldn't work for anyone else. It would never trigger.

I worked with a Microsoft Tech who said it was shared properly. We changed the Form to be anyone with Link (to allow him to test). He filled out the Form from the link and the Flow worked perfectly.


It still won't work from the Teams Channel Tab for anyone but me. I tried having it on the Tab as a Form (original) and as a website. Neither worked - it does not get back to the Forms site as a response so is unable to trigger the Flow. I ended up just sending the link out and posting on the Channel's wiki for future use. A coworker who is outside of the Group did a test. Everyone else is now skeptical that it will work so I am having trouble getting them to believe me. 


It seems strange that the hyperlink won't work since it really should, to my way of thinking, but I just give up. They can save the link to their browser and just use at will. Then they can still see the results in Teams.


Thank you for your help. It allowed me to overcome my fear of sharing ALL (the MS info is not clear on what to do with sharing other than the very basic process and not the results), rule things out, and be confident that I needed to reach out to MS when it was still unresponsive.


Take care.

Thanks @SeaLee 

Helpful resources


Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (5,460)