cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Update Task in Planner when Completed Task in Outlook

Hi!

 

 

I created a Flow that creates a task in Outlook task when a task was assigned to me. Now I also would like to complete the task in Planner after completing the task in Outlook. 

I used the method from this Discussion https://powerusers.microsoft.com/t5/General-Flow-Discussion/Completing-Outlook-task-then-completes-p...

FlowFlow

 

This Flow always sets the task in planner to completed even if I did not set the task completed in Outlook or Planner. The task is sent to Outlook and set to completed in planner immediately.

How can I create a Flow that only works when it is necessary?

 

Thanks for Help 😄

1 ACCEPTED SOLUTION

Accepted Solutions
Anonymous
Not applicable

Hi @v-yamao-msft,

 

I used this solution https://www.youtube.com/watch?v=mzTVaYV1w8g.

This is working fine for me. 

 

Thank you!

Marie 

View solution in original post

15 REPLIES 15
v-yamao-msft
Community Support
Community Support

Hi @Anonymous,

 

It seems that there is something wrong with the condition you are using in the Do-until loop.

We should select value from the action within the do-until but not from the previous action.

Please select dynamic content Status from action “Get task” instead of “Create a task”.

I have made the following flow which is working fine.

1.PNG 

 

Best regards,

Mabel

 

Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Anonymous
Not applicable

Hi @v-yamao-msft,

 

thank you for your answer. 

I changed the content to "get task" but still the task is automatically completed in Planner without any actions from me in Outlook. 

Do you think it could work if I create two separate flows? Or do you have any other suggestions?flowoutlookplanner.PNG

 

Thanks again!
Marie

Hi @Anonymous,

 

Please add the action Update a task within the Do-until loop under action Get task.

Please take another try with it.

 

Best regards,

Mabel

Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Anonymous
Not applicable

Hi @v-yamao-msft,

 

one part is working, the Planner Task is not automatically completed. But unfortunately the action is not working. I have no respond at Planner after completing the task in Outlook. See the Error:

PlannerError.PNG

planner2.PNG

Thank you!

Marie 

 

Hi @Anonymous,

 

Please make sure you select the dynamic content Value Id from the trigger.

Please create a new task in planner to trigger the flow and try again.

 

Best regards,

Mabel

 

Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Anonymous
Not applicable

Thanks for your patience. I noticed that I didn’t set the status in the last example, that’s why nothing happened.

Anyways I followed your instruction but still the same result. The task is marked as completed immediately after I created and assigned it. I created new tasks in Planner and also used existing task, same result.  

I disabled all other flows, to make sure there is no other mistake.

Please see the following:

 

That’s how the task is created in Outlook.That’s how the task is created in Outlook.

Subject includes IF to match the Planner ID with the Planner Name and title of the Task.

Due Date is set to today if it is zero and the format is changed

Start Date – format is changed

Status is set “not Started”

 

Do until.PNG

I use the ID from the create a task body. If I use something else, I get an error.

 

 

update a task.PNG

Here I use the Id from trigger Body and set Status to completed. 

 

I also tried to separate the two steps but I couldn´t get it working. And tried to add condition instead of do until.

I appreciate any help!

 

Thank you!

Marie

Hi @Anonymous,

 

Please share a full screenshot of your current flow.

The issue you mentioned didn’t occur when testing it on my side.

 

Best regards,

Mabel

Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Anonymous
Not applicable

Hi @v-yamao-msft,

 

Do you wait a little while testing the flow? It takes up to 1 min before the task is automatically set to completed. In the beginning I didn’t notice the failure because I was faster than the flow and then it seems to work. But if I wait 1 min the flow is set to completed.

I did not change anything to the previous post.

Please see below:

FlowPO.PNG

 

Thank you!

Marie 

Hi @Anonymous,

 

Thanks for the picture.

Instead of adding the action Update a task under the Do until loop, please add it within the loop.

Please click the “Add an action” within the Do-until loop to add the action.

1.PNG

 

Best regards,

Mabel

 

Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Anonymous
Not applicable

Hi @v-yamao-msft,

 

same result when I add the action within the loop. Tested different combinations several times. 

For example, I get the same result if I use “is equal to” or “if not equal to”.

planner3.PNG

Do you know how exactly the function is working in the background? For me it seems that the loop is running without checking the condition. I was reading other posts with similar errors (like https://powerusers.microsoft.com/t5/Building-Flows/Do-until-do-not-working-properly/m-p/73215) . But found no solution.

Thank you!
Marie

Hi @Anonymous,

 

What’s your current situation?

Is it working for you now?

 

Best regards,

Mabel

 

Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Anonymous
Not applicable

Hi @v-yamao-msft,

 

I used this solution https://www.youtube.com/watch?v=mzTVaYV1w8g.

This is working fine for me. 

 

Thank you!

Marie 

Hi,

 

I am having same issue with flow... task in getting completed in planner without me completing it in Outlook 

 

Youtube video isn't available 

 

@v-yamao-msft - any solutions 

 

 
 
 

flow 1.jpgflow 2.jpg

I'm also having the same issue, the Planner Task is set as Completed even when it is not Completed in Outlook Tasks.

 

The video is also not available.

Anonymous
Not applicable

I was able to solve this by adding a delay of 1 min between Get Task and Update Task actions inside Do Until loop

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!   Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪 🌠  

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

March User Group Update: New Groups and Upcoming Events!

  Welcome to this month’s celebration of our Community User Groups and exciting User Group events. We’re thrilled to introduce some brand-new user groups that have recently joined our vibrant community. Plus, we’ve got a lineup of engaging events you won’t want to miss. Let’s jump right in: New User Groups   Sacramento Power Platform GroupANZ Power Platform COE User GroupPower Platform MongoliaPower Platform User Group OmanPower Platform User Group Delta StateMid Michigan Power Platform Upcoming Events  DUG4MFG - Quarterly Meetup - Microsoft Demand PlanningDate: 19 Mar 2024 | 10:30 AM to 12:30 PM Central America Standard TimeDescription: Dive into the world of manufacturing with a focus on Demand Planning. Learn from industry experts and share your insights. Dynamics User Group HoustonDate: 07 Mar 2024 | 11:00 AM to 01:00 PM Central America Standard TimeDescription: Houston, get ready for an immersive session on Dynamics 365 and the Power Platform. Connect with fellow professionals and expand your knowledge. Reading Dynamics 365 & Power Platform User Group (Q1)Date: 05 Mar 2024 | 06:00 PM to 09:00 PM GMT Standard TimeDescription: Join our virtual meetup for insightful discussions, demos, and community updates. Let’s kick off Q1 with a bang! Leaders, Create Your Events!  Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you!

Users online (6,474)