cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Use FLOW to loop through table and send email

I have had a quick 1 hour introduction to PowerApps and I woul like to know if this is possible with FLOW.

I would like a flow that would fire every Every Monday morning and loop through my SQL vendor table and get all OPEN PO's 
I would then like to send 1 email to each vendor that has an open PO.
In My example
PlainVendor would get an email and that email would list 2 PO's on it. One for PO PL85R and one for PO DOG56
HappyVendor Would get an email with PO SAM78 on it
OldVendor Would not get an email because they have no open PO's    

 

Is this posible with PowerApps FLOW?
   Thank You So Much

VendorPOStatusVendorNameVendor Email
456ZX85BClosedHappyVendorHappyVendor@email.com
AB7PL85ROpenPlainVendorPlain@email.com
AB7DOG56OpenPlainVendorPlain@email.com
456SAM78OpenHappyVendorHappyVendor@email.com
967FROG1ClosedOldVendorOld@email.com
9 REPLIES 9
cwebb365
Most Valuable Professional
Most Valuable Professional

Yes. It’s late and I’m in bed so I can’t give much details but you can use sql connector in flow to query the data you need to get all the vendors emails that have a matching criteria and in that loop. You can put another query to get the items where the email is equal to the email on that run of the loop. And use those POs into an html table etc. and then send the email with that table. Then that loop goes for next email does same thing.

That’s the really high level version but yes it can be done ;). I have an example I use that I can post up tomorrow if you haven’t figured it out by then. Just shoot me a reply here so I have an email to follow up on if so.
Anonymous
Not applicable


Any and ALL help is welcome. 

As I said I am new to PowwerApps and greatly appreciate the help.

 

Thank You So Much

@cwebb365 wrote:
Yes. It’s late and I’m in bed so I can’t give much details but you can use sql connector in flow to query the data you need to get all the vendors emails that have a matching criteria and in that loop. You can put another query to get the items where the email is equal to the email on that run of the loop. And use those POs into an html table etc. and then send the email with that table. Then that loop goes for next email does same thing.

That’s the really high level version but yes it can be done ;). I have an example I use that I can post up tomorrow if you haven’t figured it out by then. Just shoot me a reply here so I have an email to follow up on if so.

 

cwebb365
Most Valuable Professional
Most Valuable Professional

Here is a snip of a flow I have that basically does the same thing. It uses a stored Proceedure to return a list of e-mail address of users/sites that are not compliant (no reading for the day), the loops through that list, sending each area manager a list of sites in their area missing readings. Hope this helps. 

 

poflow.JPG

v-alzhan-msft
Community Support
Community Support

Hi @Anonymous ,

 

Have your problem been solved refer to @cwebb365 's solution?

If yes, please go ahead and mark the post as solved by clicking “Accept as Solution” so that this thread will be marked for other users to easily identify!

If no, please let me know and I would provide a proper workaround for you.

 

Best regards,

Alice       

 

Community Support Team _ Alice Zhang
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Anonymous
Not applicable

I apologize I am Just getting back to this

I am stuck on the very first part of the Loop.

How do I get a "Results Set Table"  in there?

I am including my "GET" stored Procedure also. If you would please tell me if this is written correctly.

Thank You

USE [Sandbox]
GO
/****** Object:  StoredProcedure [dbo].[GetPurchaseOrderEmails]    Script Date: 9/23/2019 1:36:55 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:		<Author,,Name>
-- Create date: <Create Date,,>
-- Description:	<Description,,>
-- =============================================
CREATE PROCEDURE [dbo].[GetPurchaseOrderEmails] 
@VendorEmail varchar(50) OUTPUT 
AS
SET NOCOUNT ON;  
SELECT [VendorEmail]
  FROM [Sandbox].[dbo].[Destination]
  where PurchaseStatusDescription <> 'Closed'
  
 return

GO
Anonymous
Not applicable

I apologize I am Just getting back to this

I am stuck on the very first part of the Loop.

How do I get a "Results Set Table"  in there?


@cwebb365 wrote:

Here is a snip of a flow I have that basically does the same thing. It uses a stored Proceedure to return a list of e-mail address of users/sites that are not compliant (no reading for the day), the loops through that list, sending each area manager a list of sites in their area missing readings. Hope this helps. 

 

poflow.JPG


Thank You

cwebb365
Most Valuable Professional
Most Valuable Professional

You take the results from the stored proceedure run,  and put it in one of your steps, such as e-mail, or another SP and it will then loop based on that value. 

 

In my example, i use a SP to get e-mail addresses of people needing an alert. Then I have another execute SP where I use the e-mail results from the first SP, this then creates a loop, which I then use the results from the 2nd SP in the HTML table to build out the e-mail body info. 

Anonymous
Not applicable

Thank You so much for all of your help. Would you mind looking at my first SP.  Did I do it right?  It is getting all email addresses that have open po's?

Also  would you mind sharing your execute SP with me?  I could not find anything on  creating an Execute SP. 

USE [Sandbox]
GO

SET ANSI_NULLS ON
GO

SET QUOTED_IDENTIFIER ON
GO


-- =============================================
-- Author:		<Author,,Name>
-- Create date: <Create Date,,>
-- Description:	<Description,,>
-- =============================================
CREATE PROCEDURE [dbo].[GetPurchaseOrderEmails] 
@VendorEmail varchar(50) OUTPUT 
AS
SET NOCOUNT ON;  
SELECT [VendorEmail]
  FROM [Sandbox].[dbo].[Destination]
  where PurchaseStatusDescription <> 'Closed'
  
 return


GO
cwebb365
Most Valuable Professional
Most Valuable Professional

My 2nd stored proc is just a stored proc that has an input, which I use that e-mail input in my select statement, so that each time that loop runs it passes the current e-mail address, and then I use that output for my table. So whatever columns you need for your e-mail you would have in your select and the @input would be e-mail address.

Once you have this other SP, you use the Output from the first SP in this case email, in the 2nd SP's input and flow will automatically add the loop in. Then use the 2nd SP's outputs in your HTML table / e-mail.

Helpful resources

Announcements

Take a short Community User Survey | Help us make your experience better!

To ensure that we are providing the best possible experience for Community members, we want to hear from you!    We value your feedback! As part of our commitment to enhancing your experience, we invite you to participate in a brief 15-question survey. Your insights will help us improve our services and better serve the community.    👉Community User Survey    Thank you for being an essential part of our community!    Power Platform Engagement Team  

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Calling all User Group Leaders and Super Users! Mark Your Calendars for the next Community Ambassador Call on May 9th!

This month's Community Ambassador call is on May 9th at 9a & 3p PDT. Please keep an eye out in your private messages and Teams channels for your invitation. There are lots of exciting updates coming to the Community, and we have some exclusive opportunities to share with you! As always, we'll also review regular updates for User Groups, Super Users, and share general information about what's going on in the Community.     Be sure to register & we hope to see all of you there!

April 2024 Community Newsletter

We're pleased to share the April Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzDeenujialexander2523ragavanrajanLaurensMManishSolankiMattJimisonLucas001AmikcapuanodanilostephenrobertOliverRodriguestimlAndrewJManikandanSFubarmmbr1606VishnuReddy1997theMacResolutionsVishalJhaveriVictorIvanidzejsrandhawahagrua33ikExpiscornovusFGuerrero1PowerAddictgulshankhuranaANBExpiscornovusprathyooSpongYeNived_Nambiardeeksha15795apangelesGochixgrantjenkinsvasu24Mfon   LATEST NEWS   Business Applications Launch Event - On Demand In case you missed the Business Applications Launch Event, you can now catch up on all the announcements and watch the entire event on-demand inside Charles Lamanna's latest cloud blog.   This is your one stop shop for all the latest Copilot features across Power Platform and #Dynamics365, including first-hand looks at how companies such as Lenovo, Sonepar, Ford Motor Company, Omnicom and more are using these new capabilities in transformative ways. Click the image below to watch today!   Power Platform Community Conference 2024 is here! It's time to look forward to the next installment of the Power Platform Community Conference, which takes place this year on 18-20th September 2024 at the MGM Grand in Las Vegas!   Come and be inspired by Microsoft senior thought leaders and the engineers behind the #PowerPlatform, with Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab and Leon Welicki already confirmed to speak. You'll also be able to learn from industry experts and Microsoft MVPs who are dedicated to bridging the gap between humanity and technology. These include the likes of Lisa Crosbie, Victor Dantas, Kristine Kolodziejski, David Yack, Daniel Christian, Miguel Félix, and Mats Necker, with many more to be announced over the coming weeks.   Click here to watch our brand-new sizzle reel for #PPCC24 or click the image below to find out more about registration. See you in Vegas!       Power Up Program Announces New Video-Based Learning Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram. These include a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the image below to find out more!   UPCOMING EVENTS Microsoft Build - Seattle and Online - 21-23rd May 2024 Taking place on 21-23rd May 2024 both online and in Seattle, this is the perfect event to learn more about low code development, creating copilots, cloud platforms, and so much more to help you unleash the power of AI.   There's a serious wealth of talent speaking across the three days, including the likes of Satya Nadella, Amanda K. Silver, Scott Guthrie, Sarah Bird, Charles Lamanna, Miti J., Kevin Scott, Asha Sharma, Rajesh Jha, Arun Ulag, Clay Wesener, and many more.   And don't worry if you can't make it to Seattle, the event will be online and totally free to join. Click the image below to register for #MSBuild today!   European Collab Summit - Germany - 14-16th May 2024 The clock is counting down to the amazing European Collaboration Summit, which takes place in Germany May 14-16, 2024. #CollabSummit2024 is designed to provide cutting-edge insights and best practices into Power Platform, Microsoft 365, Teams, Viva, and so much more. There's a whole host of experts speakers across the three-day event, including the likes of Vesa Juvonen, Laurie Pottmeyer, Dan Holme, Mark Kashman, Dona Sarkar, Gavin Barron, Emily Mancini, Martina Grom, Ahmad Najjar, Liz Sundet, Nikki Chapple, Sara Fennah, Seb Matthews, Tobias Martin, Zoe Wilson, Fabian Williams, and many more.   Click the image below to find out more about #ECS2024 and register today!     Microsoft 365 & Power Platform Conference - Seattle - 3-7th June If you're looking to turbo boost your Power Platform skills this year, why not take a look at everything TechCon365 has to offer at the Seattle Convention Center on June 3-7, 2024.   This amazing 3-day conference (with 2 optional days of workshops) offers over 130 sessions across multiple tracks, alongside 25 workshops presented by Power Platform, Microsoft 365, Microsoft Teams, Viva, Azure, Copilot and AI experts. There's a great array of speakers, including the likes of Nirav Shah, Naomi Moneypenny, Jason Himmelstein, Heather Cook, Karuana Gatimu, Mark Kashman, Michelle Gilbert, Taiki Y., Kristi K., Nate Chamberlain, Julie Koesmarno, Daniel Glenn, Sarah Haase, Marc Windle, Amit Vasu, Joanne C Klein, Agnes Molnar, and many more.   Click the image below for more #Techcon365 intel and register today!     For more events, click the image below to visit the Microsoft Community Days website.      

Tuesday Tip | Update Your Community Profile Today!

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   We're excited to announce that updating your community profile has never been easier! Keeping your profile up to date is essential for staying connected and engaged with the community.   Check out the following Support Articles with these topics: Accessing Your Community ProfileRetrieving Your Profile URLUpdating Your Community Profile Time ZoneChanging Your Community Profile Picture (Avatar)Setting Your Date Display Preferences Click on your community link for more information: Power Apps, Power Automate, Power Pages, Copilot Studio   Thank you for being an active part of our community. Your contributions make a difference! Best Regards, The Community Management Team

Users online (3,417)