cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Willo
Helper II
Helper II

Using a flow to extract email body details

Hello, 

 

Is there a way to leverage a flow to pull out email body and subject details without using a third party service? I'm looking to move details from an email into a sharepoint list.

 

Thank you

1 ACCEPTED SOLUTION

Accepted Solutions
v-yamao-msft
Community Support
Community Support

Hi @Willo,

 

Yes, it could be achieved by using WDL function in flow.

 

Say your email body would be always the following format:

1.PNG

 

Then you could create a flow likes below. In this case, I will show how to extract the subject from the email body, please take it for a reference.

 

The flow is triggered by When a new email arrives, then convert the email body from Html to text.

 

In action Compose, use the code to get the total length of the body:

length(body('Html_to_text'))

In Compose2, use the following code:

add(indexOf(body('Html_to_text'),'Subject'),9)

In compose3, use the following code:

indexOf(body('Html_to_text'),'Start time')

In Compose4, use the following code:

substring(body('Html_to_text'),outputs('Compose_2'),sub(outputs('Compose_3'),outputs('Compose_2')))

 

It works fine and the subject can be extracted from the email body successfully.

2.PNG3.PNG

 

More details about the functions at here:

https://docs.microsoft.com/en-us/azure/logic-apps/workflow-definition-language-functions-reference

 

 

Best regards,

Mabel Mao

Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

16 REPLIES 16
v-yamao-msft
Community Support
Community Support

Hi @Willo,

 

Yes, it could be achieved by using WDL function in flow.

 

Say your email body would be always the following format:

1.PNG

 

Then you could create a flow likes below. In this case, I will show how to extract the subject from the email body, please take it for a reference.

 

The flow is triggered by When a new email arrives, then convert the email body from Html to text.

 

In action Compose, use the code to get the total length of the body:

length(body('Html_to_text'))

In Compose2, use the following code:

add(indexOf(body('Html_to_text'),'Subject'),9)

In compose3, use the following code:

indexOf(body('Html_to_text'),'Start time')

In Compose4, use the following code:

substring(body('Html_to_text'),outputs('Compose_2'),sub(outputs('Compose_3'),outputs('Compose_2')))

 

It works fine and the subject can be extracted from the email body successfully.

2.PNG3.PNG

 

More details about the functions at here:

https://docs.microsoft.com/en-us/azure/logic-apps/workflow-definition-language-functions-reference

 

 

Best regards,

Mabel Mao

Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
GabrielStJohn
Community Champion
Community Champion

Hello, @Willo!

 

Thank you for posting on the Flow Community Forum! Have you had an opportunity to apply @v-yamao-msft‘s recommendation to adapt your Flow? If yes, and you find that solution to be satisfactory, please go ahead and click “Accept as Solution” so that this thread will be marked for other users to easily identify!


Thank you for being an active member of the Flow Community!

 

-Gabriel
Flow Community Manager

- Gabriel
Community Manager
Power Automate | Power Virtual Agents
Super User Program Manager



Could you explain how you then create the list itemfrom the extracted text items?  This was the OP's original aim, and we have a similar problem.

 

Regards

I was able to do this by making sure I had a connection for SharePoint online in my connectors.

 

Then I selected after "compose 4", Create Item for SharePoint, then by putting in the address of the site in SharePoint online, then selecting the list,

 

Then used the dynamic content selector to get the output for Compose 4

 

 

Annotation 2019-10-15 163540.png

 

Hi @v-yamao-msft ,

 

I know this is quite an old post but i hope you will be able to help. Could you explain each of the various compose steps? I'm especially curios why you have a 9 in compose 2?

 

Seeing this is quite old is there any new and better ways to do this without a third party services of course.

Hi @dee2005 

 


@dee2005 wrote:

Hi @v-yamao-msft ,

 

I know this is quite an old post but i hope you will be able to help. Could you explain each of the various compose steps? I'm especially curios why you have a 9 in compose 2?

 

Seeing this is quite old is there any new and better ways to do this without a third party services of course.


I supposed that @v-yamao-msft ha used 9 because if you see, you have "Subject" plus ":" plus " " (blank space), so the total characters are 9.

 

--

Regards

Marco

@v-yamao-msft  So the problem I am facing is :  I am getting an email , in email 's body i am getting an email address"  , I need to extract that . Can you suggest something?

Anonymous
Not applicable

and by using the "TRIM" expression, this even works when using a table within the html-email-message!

Anonymous
Not applicable

you would need to identify the start and the end of your email address. maybe seach for the "@" and the nearest "space" before and after this string?

What if there is a space or a line before the data?  

ItemStock Number Unit PriceDetail TotalStudent ID Card 4182246$0.00$0.00ID
Number: 10000000      Subtotal:$0.00   Shipping:$1.00   Tax:$0.00   Total:$1.00

This worked awesome! Thanks!  
Appreciate the screenshots as well!

Anonymous
Not applicable

@v-yamao-msft thanks, this helped me a lot. A couple of questions though
- what is the purpose of the total length of the body in the first Compose action?

- how can I find the index of a string that is between newline characters? There are two instances of the same search string in my email body, I need the second one, which is '\nMySearchString\n' not just 'MySearchString', but with \n it returns the index of the first newline character it finds. I ended up adding 158 characters to the first index rather than searching for the second.

- would there be any advantage in using variables to store the result of the expressions?

Hello,

 Do you have some exemples, for insert this informations in the excel?

@v-yamao-msft ,

 

Does the "html to text (preview) step need to be added prior to the Compose actions?  It seems the *content is needed for that action, yet nothing was provided in your example flow.    can you clarify if its needed and what goes in the html to text content?   

 

ninjaryder1st_0-1668543920918.png

 

 

I don't have a nicely defined "Start Time" like your example.   My repeating email contains a bullet marker an date that changes..  anyway to compose/define this to extract date when followed by bullet in the email body?  

ninjaryder1st_1-1668544170974.png

 

 

Anonymous
Not applicable

Hey! I learned a lot about this issue, here details that are hopefully useful:

a) YES, you need Html to text whenever your source text is in html (such as an email's body) 

b) instead of IndexOf + Substring .. much better with two nested SPLITs

Details and explanations:

a) example usually: Trigger was "new email received in Mailbox"?

you need a loop [here called "apply to all emails"], but this is built automatically - don't worry.

within the HTML to Text, your source is "items('Apply_to_all_Emails')?['body']"

 

the "body" might start with something like this:

<p><html><head>\r\n<meta http-equiv=\"Content-Type\" content=\"text/html; charset=utf-8\"><meta content=\"IE=edge\"><meta name=\"viewport\" content=\"width=device-width, initial-scale=1\"><style type=\"text/css\">\r\n<!--\r\np\r\n\t{margin:10px 0;\r\n\tpadding:0}\r\ntable\r\n\t{border-collapse:collapse}\r\nh1, h2, h3, h4, h5, h6\r\n\t{display:block;\r\n\tmargin:0;\r\n\tpadding:0}\r\nimg, a img\r\n\t{border:0;\r\n\theight:auto;\r\n\toutline:none;\r\n\ttext-decoration:none}\r\nbody, #bodyTable, ....... ..... <table border=\"0\" cellspacing=\"0\" class=\"mcnTextContentContainer\" width=\"100%\" style=\"min-width:100%!important; background-color:#404040\"><tbody><tr><td valign=\"top\" class=\"mcnTextContent\"  .... <span style=\"font-size:12px\">zum nachfolgenden Vorgang wurden vom zuständigen&nbsp;Underwriter der Versicherer (Demo) die Police eingereicht:</span> ...... </div></body></html></p>"
 

you might think of using "items('Apply_to_all_Emails')?['bodyPreview']"  which is "plain text" only; but at the same time, it's cut off. so not useful.

 

Using the HTML to Text step, the output (of example above) might look something like this:

 

[EXTERNAL SENDER]

Frankfurt am Main, den 17.11.22

Guten Tag,

zum nachfolgenden Vorgang wurden vom zuständigen Underwriter der Versicherer (Demo) die Police eingereicht:

 

 

b) and second comment - super elegant:

 

In my example, I want to cut out this information "in the middle:

wurden vom zuständigen Underwriter der Versicherer (Demo) die Police eingereicht

 

 

so in Compose (Verfassen), or equally when setting a Variable value, the expression is as follows:

trim(split(split(outputs('text'), 'Underwriter der')[1], 'die Police eingereicht')[0])

 

- Text before my "desired piece of information": "Underwriter der"

- Text after my "desired piece of information": "die Police eingereicht"

wurden vom zuständigen Underwriter der Versicherer (Demo) die Police eingereicht

 

-> trim(split(split(outputs('text'), 'Underwriter der')[1], 'die Police eingereicht')[0])

 

outputs('text') is simply some plain text

 

what this function does:

a) trim to get rid of needless spaces

b) split nested; first, split the text into two pieces - at 'Underwriter der'

c) [1] means: take the 2nd half of the text)

d) then put this 2nd half into another split, which is cut off at 'die Police eingereicht',

e) and take the 1st half using [0] .

 

Well.. good luck, just re-build this one formula, and good luck.

let me know if you have further questions.

astampf_1-1668736041216.png

yes you can , If you  need to extract new emails or leads that come back as out of office replies, when running an email campaign. Or just copy any data from email messages. his website does it for free for upto few 100 emails  https://haileads.com  

write the team at info@haileads.com  if u have a larger set of emails to be processed.

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (3,738)