cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
3TA
Advocate I
Advocate I

Winautomation login with Power Automate Licence stopped working

Hi

 

As of today WinAutomation with Power Automate Licence Login has stopped working.

 

I have a per user Power Automate Attended RPA licence.

 

I have just had a windows update (Windows 10) and since then WinAutomation has asked me to log in again. When I submit my Power Automate / Azure email credential I get the following.


 

 

Sign in

Sorry, but we’re having trouble with signing you in.

 
AADSTS700016: Application with identifier '7afbe641-8db0-4580-96d1-b2b58538a3f3' was not found in the directory 'XXXXXXXXXXXXX'. This can happen if the application has not been installed by the administrator of the tenant or consented to by any user in the tenant. You may have sent your authentication request to the wrong tenant.

Troubleshooting details
If you contact your administrator, send this info to them.
Copy info to clipboard
 

 

Request Id: d8c6c13e-e816-4bab-999c-9020aca34700
Correlation Id: 34e8b54b-dc22-4f27-bfdd-348299f6bdc4
Timestamp: 2022-11-03T17:24:56Z
Message: AADSTS700016: Application with identifier '7afbe641-8db0-4580-96d1-b2b58538a3f3' was not found in the directory 'XXXXXXXXXXXX'. This can happen if the application has not been installed by the administrator of the tenant or consented to by any user in the tenant. You may have sent your authentication request to the wrong tenant.
Flag sign-in errors for review: Enable flagging
If you plan on getting help for this problem, enable flagging and try to reproduce the error within 20 minutes. Flagged events make diagnostics available and are raised to admin attention.

I checked in Azure and WinAutomation was present in the Enterprise Apps section. I tried setting the flag but it did not show up in Azure. I deleted it from there thinking it would reset when I signed in but it has not and I dont know how to get it back or restore function to WinAutomation.

I need WinAutomation to work again, I am in the middle of a business-critical development and I have thousands of hours of work in my WinAutomation database, going back since 2015. There are numerous problems moving this over to PAD which I will not go into here, but it is going to be an enormous undertaking. I need WinAutomation to function.

I have tried to get support through the Power Automate licence route but when I try to log in it does not recognize my Azure/Power Automate credentials.
 
Please help. 

Please advise how I can restore full functionality to WinAutomation with my Power Automate Unattended RPA licence using my Azure login details as before. 
78 REPLIES 78
3TA
Advocate I
Advocate I

Thanks for the update. I have just managed to open a support ticket myself. Supposed to be getting back to me in 8 hours. There is no way to indicate it is a critical issue though, just "Minimal impact". I am in a similar position to you, migration is going to be a PIA. Was waiting for them to reach parity, which they said they would do, but in fact have not done, there are several features of WA that you cannot migrate to PAD - notably customised dialogs as well as some of the SaaS interfaces. 
The power automate licence is supposed to act as a licence for WA. There has been no indication that they would withdraw this functionality from the Power Automate Licence so perhaps it is a mistake that will be rectified.

Hi, Carlos

 

This might be a stupid question but where do you raise the ticket on the admin site?

https://admin.powerplatform.microsoft.com/support

 

Click on "+ New support request" or something like that? I have Dutch interface.

Thanks for your reply. I might be missing some permissions as i don't have that option.

 

Thanks anyways 🙂

carlos_slim
Frequent Visitor

And another quick update, since I know that some are craving for info. But I got a reply from Microsoft. See below. Looks promising. Although I get an error activating, this will probably be sorted. And I have also asked about the end date, since the license I bought is perpetual. For reasons stated above, I will migrate. But seems good to ask anyhow. And although if course I know they did no longer develop/support WA, I was not aware they would pull the plug. And seems I am not alone here..

 

"Thank you so much for your response.

 

Please note that using WinAutomation with Power Automate license is no longer supported. Our product team had sent communications to customers advising them to migrate to Power Automate Desktop since more than a year now as the support had ended on Dec 31 2021. Please refer the article: Softomotive products end of support announcement | Microsoft Learn

 

However, our product team is working on extending or providing license for few months so that the customers can get some additional time to migrate the Winautomation processes to Power Automate . I had reached out to the product team and had requested them to provide the new license. They have now shared the attached license file for Winautomation. Please note that this license has an expiry of 6 months and will expire on May 4th 2023.

 

Please refer the below docs for steps to install the new license file:

 

Softomotive products end of support announcement | Microsoft Learn

 

Please do let me know if you have any further questions. Thank you, ...!"

Thanks for the update. I reached out to Microsoft as well - i am yet to receive an answer.

Do you know what makes you eligible for a license? 

3TA
Advocate I
Advocate I

"Please note that using WinAutomation with Power Automate license is no longer supported. "
Thank you for this information.
I have never received any communication saying this explicitly. Yes we all know its no longer supported, but to pull the plug on it and force everyone to ditch that app is quite irresponsible considering they have reneged on their promise to develop parity in PAD.
Anyway now we know where we stand. 

"However, our product team is working on extending or providing license for few months so that the customers can get some additional time to migrate the Winautomation processes to Power Automate."

 

This Microsoft person is nuts and doesn't know what he/she is talking about. We don't want support, we want the software to be licensed, and Microsoft committed to licensing WinAutomation with no end date per the very website that person quoted.

 

"The last day of support will be December 31, 2021. After that date, any current Softomotive customer, regardless of license type, will still be able to use their software but with no support, upgrades, and updates. This applies for all customers with no custom agreement with Softomotive."

 

Now they are acting like they are doing us a favor for turning back on, for only a short time, a product they said they wouldn't turn off as long as we paid our subscription??

 

Ridiculous.

Agnius
Most Valuable Professional
Most Valuable Professional

The plug has not been pulled for everyone. I still have multiple clients who are running WinAutomation on Power Automate licenses perfectly fine. It seems to only affect some clients or possibly some machines even.

 

I managed to get some support and received a license file for the specific client who was experiencing the issue. They were formerly a Softomotive client and had actually received a file earlier, but did not download it in time and the URL was now no longer valid. So, they issued a new file now, but it is only valid for 6 months, so we are now forced to migrate. But at least we have some time to do it properly.

-------------------------------------------------------------------------------------------------------------------------
If I have answered your question, please mark it as the preferred solution. If you like my response, please give it a Thumbs Up.
Regards, Agnius Bartninkas

Have your clients tried restarting their machines? On our clients the issue appears as soon as you sign out and try to sign back in.

What is PAD and which plan are you on?

Agnius
Most Valuable Professional
Most Valuable Professional

PAD is Power Automate Desktop.

As to whether they have rebooted or not - pretty sure they haven't. But the client that did experience it, did not reboot either. It just appeared out of nowhere in the middle of the day yesterday.

-------------------------------------------------------------------------------------------------------------------------
If I have answered your question, please mark it as the preferred solution. If you like my response, please give it a Thumbs Up.
Regards, Agnius Bartninkas
brooksim
Regular Visitor

This is what I received in reponse to my ticket but I have not been able to make it work:

Hope you are doing well, I really appreciate your patience.

 

Reason: -

  • The error means that there is a mismatch between the tenant where your app is registered and where you have stated in either the application code or the portal that your application is registered. In your code for the application, you need to set the tenant ID. This is generally located in either the web.config or the app settings. Then you need to register the application in the portal under the same tenant ID that you have set in your code. Also ensure that your application ID/client ID are matching on both sides and all of the values set in your app settings/web.config match what you have in the portal.

Follow below steps to get your Microsoft/OneDrive account's Client ID and tenant Id:

  • Go to Microsoft Azure.
     If you have created an account with Microsoft Azure, enter your credentials to login, else create an account
  • Go to Azure Active Directory
  • Select App Registrations
  • Click on Register an application

  • Enter a Name for your application.
  • Accept the default selection of Accounts in this organizational directory only (Default Directory only - Single tenant) for this application.
  • Enter the name, select your desired option in Supported account types, select web option under Redirect URL
  • Enter this URL
  • Once you are finished, click on Register
  • Here is your Application (Client) ID. Copy it and go to Certificates and Secrets
  • Click on New Client Secret
  • Enter description, select expiry time and click on Add
  • Here is your Client Secret Key. Copy it too
    • Note: Client secret values cannot be viewed, except for immediately after creation. Be sure to save the secret when created before leaving the page.
  • Now paste both the Microsoft Client ID and Secret Key in their respective fields on creator software

 

For more details, please check with below article

 

Reference article:Set up sign-in for an Azure AD organization - Azure AD B2C | Microsoft Learn

 

Please reply to this mail, if you have any concern.

 

Thank you so much for your time, great collaboration, patience, and for using Microsoft products and services, we appreciate your business. 

 

Have a wonderful day! 

Agnius
Most Valuable Professional
Most Valuable Professional

Yes, this would likely help if it was a new app. But for my case, I actually checked and the app did exist in Azure AD and the IDs did match. Also, none of those things were changed recently to cause a sudden mismatch. So, my guess is there was either an error at MS side or they may have shut down support for WinAutomation on purpose.

-------------------------------------------------------------------------------------------------------------------------
If I have answered your question, please mark it as the preferred solution. If you like my response, please give it a Thumbs Up.
Regards, Agnius Bartninkas

The plug has not been pulled for everyone....yet. Things take a while to roll out, but clearly there are enough people in here with the exact same issue and exact same error that this is coming down the pipe for everyone - and it fits with the gobblydegook coming out of Microsoft as pointed out earlier. They have basically said we can use WA forever without support (absolutely fine) to suddenly pulling the plug via a licensing tweak and with no actual announcement. The reference to saying they wouldnt support it for the last year is just cope, its got nothign to do with supporting it, and everything to do with killing it and forcing people onto the inferior (at the moment) PAD which you might have noticed has also crept up in price to coincide. 
"You will own nothing and you will be happy"

"So, my guess is there was either an error at MS side or they may have shut down support for WinAutomation on purpose."

 

I absolutely believe this move was no accident and was carefully planned by their management to nudge people off a cliff.

I also checked in Azure and exactly as you describe, it was in there and the ID etc were all correct. It seems to be in response to some change in how they are verifying the licensing, I would guess. Probably unintended, probably not interested in fixing it. I wonder if anyone has ever reverse engineered the latest version of WA to remove the licensing requirements? Nobody seems to want it, softomotive got paid, microsoft are not interested in it anymore having stripped out its utility to them and reduced its ease of use for the rest of us via PAD ugly UI, slower performance in both designer and runtime and of course applying the price increases now they have everybody where they want them.
At least we know they would never just decide they are ditching PAD like they have with so many other things, or not keep their word about future use of things.

ApexOrigin
Advocate II
Advocate II

Well, things have just gone from horrible to insanely bad for me. I still can't log in, but now, when I try to run the Process Migrator, all my processes are no longer showing up in the migrator, so there's nothing to migrate.

 

I was able to migrate one process this morning, so they were still all there just hours ago, and I didn't change anything.

 

What's going on?

brooksim
Regular Visitor

Well.  I was not able to get win automation fixed but was able to move over all my jobs to the desktop version.  This is the best article I found and the migration worked: https://learn.microsoft.com/en-us/previous-versions/troubleshoot/winautomation/softomotive-useful-in... 

ApexOrigin
Advocate II
Advocate II

As a follow up to my issue with not being able to migrate my processes, I found the problem.

 

I store my processes.dat folder in a DropBox folder so I always have full backup of my robots with the ability to roll back if needed. I have WinAutomation configured to go to that DropBox folder instead of the default folder.

 

I guess trying to log in 20 times caused the WinAutomation software to reset itself and use the default Documents/WinAutomation folder with only test processes.

 

I copied my full process.dat file to the default folder, and now I can access my processes to migrate them.

 

Hopefully this will help anyone that doesn't use the default folders and runs into this issue.

Helpful resources

Announcements

Take a short Community User Survey | Help us make your experience better!

To ensure that we are providing the best possible experience for Community members, we want to hear from you!    We value your feedback! As part of our commitment to enhancing your experience, we invite you to participate in a brief 15-question survey. Your insights will help us improve our services and better serve the community.    👉Community User Survey    Thank you for being an essential part of our community!    Power Platform Engagement Team  

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Calling all User Group Leaders and Super Users! Mark Your Calendars for the next Community Ambassador Call on May 9th!

This month's Community Ambassador call is on May 9th at 9a & 3p PDT. Please keep an eye out in your private messages and Teams channels for your invitation. There are lots of exciting updates coming to the Community, and we have some exclusive opportunities to share with you! As always, we'll also review regular updates for User Groups, Super Users, and share general information about what's going on in the Community.     Be sure to register & we hope to see all of you there!

April 2024 Community Newsletter

We're pleased to share the April Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzDeenujialexander2523ragavanrajanLaurensMManishSolankiMattJimisonLucas001AmikcapuanodanilostephenrobertOliverRodriguestimlAndrewJManikandanSFubarmmbr1606VishnuReddy1997theMacResolutionsVishalJhaveriVictorIvanidzejsrandhawahagrua33ikExpiscornovusFGuerrero1PowerAddictgulshankhuranaANBExpiscornovusprathyooSpongYeNived_Nambiardeeksha15795apangelesGochixgrantjenkinsvasu24Mfon   LATEST NEWS   Business Applications Launch Event - On Demand In case you missed the Business Applications Launch Event, you can now catch up on all the announcements and watch the entire event on-demand inside Charles Lamanna's latest cloud blog.   This is your one stop shop for all the latest Copilot features across Power Platform and #Dynamics365, including first-hand looks at how companies such as Lenovo, Sonepar, Ford Motor Company, Omnicom and more are using these new capabilities in transformative ways. Click the image below to watch today!   Power Platform Community Conference 2024 is here! It's time to look forward to the next installment of the Power Platform Community Conference, which takes place this year on 18-20th September 2024 at the MGM Grand in Las Vegas!   Come and be inspired by Microsoft senior thought leaders and the engineers behind the #PowerPlatform, with Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab and Leon Welicki already confirmed to speak. You'll also be able to learn from industry experts and Microsoft MVPs who are dedicated to bridging the gap between humanity and technology. These include the likes of Lisa Crosbie, Victor Dantas, Kristine Kolodziejski, David Yack, Daniel Christian, Miguel Félix, and Mats Necker, with many more to be announced over the coming weeks.   Click here to watch our brand-new sizzle reel for #PPCC24 or click the image below to find out more about registration. See you in Vegas!       Power Up Program Announces New Video-Based Learning Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram. These include a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the image below to find out more!   UPCOMING EVENTS Microsoft Build - Seattle and Online - 21-23rd May 2024 Taking place on 21-23rd May 2024 both online and in Seattle, this is the perfect event to learn more about low code development, creating copilots, cloud platforms, and so much more to help you unleash the power of AI.   There's a serious wealth of talent speaking across the three days, including the likes of Satya Nadella, Amanda K. Silver, Scott Guthrie, Sarah Bird, Charles Lamanna, Miti J., Kevin Scott, Asha Sharma, Rajesh Jha, Arun Ulag, Clay Wesener, and many more.   And don't worry if you can't make it to Seattle, the event will be online and totally free to join. Click the image below to register for #MSBuild today!   European Collab Summit - Germany - 14-16th May 2024 The clock is counting down to the amazing European Collaboration Summit, which takes place in Germany May 14-16, 2024. #CollabSummit2024 is designed to provide cutting-edge insights and best practices into Power Platform, Microsoft 365, Teams, Viva, and so much more. There's a whole host of experts speakers across the three-day event, including the likes of Vesa Juvonen, Laurie Pottmeyer, Dan Holme, Mark Kashman, Dona Sarkar, Gavin Barron, Emily Mancini, Martina Grom, Ahmad Najjar, Liz Sundet, Nikki Chapple, Sara Fennah, Seb Matthews, Tobias Martin, Zoe Wilson, Fabian Williams, and many more.   Click the image below to find out more about #ECS2024 and register today!     Microsoft 365 & Power Platform Conference - Seattle - 3-7th June If you're looking to turbo boost your Power Platform skills this year, why not take a look at everything TechCon365 has to offer at the Seattle Convention Center on June 3-7, 2024.   This amazing 3-day conference (with 2 optional days of workshops) offers over 130 sessions across multiple tracks, alongside 25 workshops presented by Power Platform, Microsoft 365, Microsoft Teams, Viva, Azure, Copilot and AI experts. There's a great array of speakers, including the likes of Nirav Shah, Naomi Moneypenny, Jason Himmelstein, Heather Cook, Karuana Gatimu, Mark Kashman, Michelle Gilbert, Taiki Y., Kristi K., Nate Chamberlain, Julie Koesmarno, Daniel Glenn, Sarah Haase, Marc Windle, Amit Vasu, Joanne C Klein, Agnes Molnar, and many more.   Click the image below for more #Techcon365 intel and register today!     For more events, click the image below to visit the Microsoft Community Days website.      

Tuesday Tip | Update Your Community Profile Today!

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   We're excited to announce that updating your community profile has never been easier! Keeping your profile up to date is essential for staying connected and engaged with the community.   Check out the following Support Articles with these topics: Accessing Your Community ProfileRetrieving Your Profile URLUpdating Your Community Profile Time ZoneChanging Your Community Profile Picture (Avatar)Setting Your Date Display Preferences Click on your community link for more information: Power Apps, Power Automate, Power Pages, Copilot Studio   Thank you for being an active part of our community. Your contributions make a difference! Best Regards, The Community Management Team

Users online (2,962)