cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
3TA
Advocate I
Advocate I

Winautomation login with Power Automate Licence stopped working

Hi

 

As of today WinAutomation with Power Automate Licence Login has stopped working.

 

I have a per user Power Automate Attended RPA licence.

 

I have just had a windows update (Windows 10) and since then WinAutomation has asked me to log in again. When I submit my Power Automate / Azure email credential I get the following.


 

 

Sign in

Sorry, but we’re having trouble with signing you in.

 
AADSTS700016: Application with identifier '7afbe641-8db0-4580-96d1-b2b58538a3f3' was not found in the directory 'XXXXXXXXXXXXX'. This can happen if the application has not been installed by the administrator of the tenant or consented to by any user in the tenant. You may have sent your authentication request to the wrong tenant.

Troubleshooting details
If you contact your administrator, send this info to them.
Copy info to clipboard
 

 

Request Id: d8c6c13e-e816-4bab-999c-9020aca34700
Correlation Id: 34e8b54b-dc22-4f27-bfdd-348299f6bdc4
Timestamp: 2022-11-03T17:24:56Z
Message: AADSTS700016: Application with identifier '7afbe641-8db0-4580-96d1-b2b58538a3f3' was not found in the directory 'XXXXXXXXXXXX'. This can happen if the application has not been installed by the administrator of the tenant or consented to by any user in the tenant. You may have sent your authentication request to the wrong tenant.
Flag sign-in errors for review: Enable flagging
If you plan on getting help for this problem, enable flagging and try to reproduce the error within 20 minutes. Flagged events make diagnostics available and are raised to admin attention.

I checked in Azure and WinAutomation was present in the Enterprise Apps section. I tried setting the flag but it did not show up in Azure. I deleted it from there thinking it would reset when I signed in but it has not and I dont know how to get it back or restore function to WinAutomation.

I need WinAutomation to work again, I am in the middle of a business-critical development and I have thousands of hours of work in my WinAutomation database, going back since 2015. There are numerous problems moving this over to PAD which I will not go into here, but it is going to be an enormous undertaking. I need WinAutomation to function.

I have tried to get support through the Power Automate licence route but when I try to log in it does not recognize my Azure/Power Automate credentials.
 
Please help. 

Please advise how I can restore full functionality to WinAutomation with my Power Automate Unattended RPA licence using my Azure login details as before. 
78 REPLIES 78
carlos_slim
Frequent Visitor

My latest: I have a solution now. As mentioned earlier I got the license file from Microsoft, which is valid for half a year. I could not activate it however, but that had to do with the fact I was on WA release 9.2.3.5816. The Microsoft support employee directed me to https://go.microsoft.com/fwlink/?linkid=2133567 in order to download and install release 9.2.4.5905. With this I could activate the software. So I am back in.

 

I repeated my question why the license is only valid for half a year. Since I bought the perpetual WA software in 2017, for which I bought maintenance each year until the WA acquisition. Instead of just simply answering the question, he asked if I am available for a Teams next week. I am, so will await what this brings. And I will post it here.

 

Last: I earlier emphasized using old software is a dead end at some point. Exchange, browsers, OS etc. will all evolve, so at some point WA will stop being usable anyhow. Plus all new features/connections will be in PA, so it is not a matter of IF ben WHEN. But as I have stated, and I see other forum members stating this more bluntly: WA has a much, much clearer UI, the desktop triggers (e.g. CTRL combos) cannot be used in PAD, the overview of flows is much clearer in WA (PA has no tree like structure) and lastly PA is much slower starting the processes; once a process runs I cannot see at the moment that this is slower, for sure one can see that starting a process takes up to seconds, whil WA was immediate.

I agree that at some point WA will stop being practically useful. But if left to happen organically that could be a good way off. Personally, I like to get the maximum return on my financial, time and energy investments.

Where did you get the licenses? 1 license needs to be used in 1 machine or can be used in multiple machines?

Would you please post your Microsoft support ticket number? Microsoft is so big that it seems like the support people all have to reinvent the wheel to solve this problem, so it would be great if we could point them to your ticket about generating a license file.

The case ID for my ticket was 2211040050001269

-------------------------------------------------------------------------------------------------------------------------
If I have answered your question, please mark it as the preferred solution. If you like my response, please give it a Thumbs Up.
Regards, Agnius Bartninkas
3TA
Advocate I
Advocate I

Support pledge of 1 hour is complete fantasy. Anyway, for anyone still struggling and not getting satisfaction from MS, you will find a solution off-piste. 

MathiasRT93
Frequent Visitor

The support guy i am in contact with is of absolutely no help, and he has no desire to help whatsoever. 

 

Did any of you find a more viable option than going through The Power Platform Admin Support site?

Hello i'm WinAutomation user too.

I have the temporary license file and the link that tells how to input the license file into the 'WinAutomation Setting Options'

But we failed to login the WinAutomation program.

Could you tell me how you login to the WinAutomation app program and apply to the WinAutomation option?

 

You will need to reinstall WinAutomation and then, during installation, select WinAutomation licensing. This is done during installation, so you cannot change the licensing model without reinstalling the application.

-------------------------------------------------------------------------------------------------------------------------
If I have answered your question, please mark it as the preferred solution. If you like my response, please give it a Thumbs Up.
Regards, Agnius Bartninkas
carlos_slim
Frequent Visitor

Latest and final update: I have a 100% solution now. After receiving the temporary key (valid for 6 months), I asked why I did not get a perpetual key, since I once bought WA: Microsoft sent a perpetual key in december 2021 (via mspowerplatform@microsoft.com), but when trying to install I got an error, and this made me subscribe to Power Automate. Rest is history. In hindsight, the error had to do with not having installed the latest Microsoft release (9.2.4.5905), becauce since I got this release installed, the problems disappeared.

 

I will stay subscribed to WA, since I still plan to migratie, but I like the fact that I can do it at my own pace, with probably a better migrator (see what improvements to the migrator are on the road map here: https://learn.microsoft.com/en-us/power-automate/desktop-flows/softomotive-migrator#process-robot-ac...) and with a further developed PAD version that brings uw hopefully more on par with WA.

 

Last remark: I found the help I got from Microsoft very helpful. Excellent even. While I was certainly not expecting this, since they are a huge organization and seeing how they handle pulling the plug out of the Exchange connector etc. But the reply was fast, they solved my problem and they seriously seem to take my feedback into consideration.

 

All the best everybody.

thepla
New Member

Hi, I use WA ver 6, for compiler.  Im getting an oops message below.

 

I think it's because Winautoation website is down. My console works but triggers stopped. When I go to debug there is a delay for first line.

 

I tried to install lic file I received last year. It says wrong machine. I guess if I ever have a machine failure I am out of business. I'd go to there WA Power Automate but I have some robots that are on many clients machines and cannot installl POwer Automate on their systems and can't pay monthy on their system

 

Is there any workaround to wrong machine or compiling a robot? Maybe a fix for Oope message?

 

Thanks

thepla_0-1668649721404.png

 

To clarify, I downloaded WA6 on a new machine and did theire lic file and it says wrong machine.

YuHash
Advocate II
Advocate II

Hi, thanks everyone for valuable info. I've been using WA with Attended RPA license, signed-in with Microsoft account and do not have the license file.

(We start using WA only after MS acquisition of Softomotive. Still in the middle of migration to PAD.)


So, from what I understand from the above discussion, there's no way for this MS account authentication method to work again, right? And the only way is through activating the license file given to the customers of Softomotive time...unless MS change their mind to recover the Azure authentication entry?


Please let me know if you know any way to get the Azure authentication working. Thanks!

"So, from what I understand from the above discussion, there's no way for this MS account authentication method to work again, right? And the only way is through activating the license file given to the customers of Softomotive time...unless MS change their mind to recover the Azure authentication entry?"

 

Bottom line, Microsoft is reneging on their written commitment to provide access to WinAutomation indefinitely as long you pay your PAD subscription. They locked a lot of people out of their WinAutomation console without any warning, and now they are saying if you ask nicely they will give you a 6 month temporary license, but that's all. No more access after the license expires.

 

I was locked out for almost 2 weeks before Microsoft support finally sent me the temp license. Locking someone out of their WinAutomation console is like the landlord locking you out of your apartment with your kids, pets, and all your stuff still inside, even though you have always paid your rent. I put years of work into my processes, and they do business critical operations and I was locked out for 2 weeks. Now they are tell you that you'll be evicted in 6 months.

 

Very shady business practice, because there is no doubt this was planned even though they didn't give any warning, and Microsoft should be ashamed of themselves.

Agnius
Super User
Super User

I was actually contacted by a former Softomotive rep. currently working at MS last week after I had posted the same request for a license file the 3rd time (every time for a different client). They came back saying that the reason for this mess is the fact that the entire infrastructure that was used by WA was taken down some time in October-November and the licensing servers went down along with it. 

But they did agree that clients that had previously purchased a perpetual license of WinAutomation from Softomotive were eligible to actually have perpetual licenses. And they would have been able to download the license files that they had been told to download back in December 2021 had the servers where those files were being stored not been taken down.

So, they asked me to provide a list of clients that we serve that had purchased WinAutomation initially. I gave them a list of 4 clients and received a perpetual license file for each of them. So, at least this works.

We will anyhow migrate all of those clients, but at least we now have some more time to do it, as some of those legacy projects are a bit tricky.

-------------------------------------------------------------------------------------------------------------------------
If I have answered your question, please mark it as the preferred solution. If you like my response, please give it a Thumbs Up.
Regards, Agnius Bartninkas

Thanks for update. If they are reading maybe someone can reach out to me.  I did download my perpetual license. It cannot install on any computer but one it's linked to.  I did get a call from Microsoft and they claim their goal is not to put us out of business but I am not sure I agree.  I have compiled was on several clients that run via windows task scheduler. Ms want 150 per month for that functionality for every one of my customers which is over hundred more per month than I collect.  If my computer fails I'm out of business.

 

Please someone from wa explain how my perpetual license can be transferred, if needed.  A six month bandaid just prolongs being out of business.

Btw I am thepla above but I can't figure out how to login and get to community.

ApexOrigin
Advocate II
Advocate II

"I was actually contacted by a former Softomotive rep. currently working at MS last week after I had posted the same request for a license file the 3rd time (every time for a different client). They came back saying that the reason for this mess is the fact that the entire infrastructure that was used by WA was taken down some time in October-November and the licensing servers went down along with it. "

 

Thanks for posting that. It confirms what I thought that Microsoft knew they were taking down WinAutomation and purposely didn't let their paying WinAutomation customers know in advance causing many to have long outages of business critical processes.

 

Absolutely disgusting. I won't be recommending any Microsoft products going forward, and I will look for ways to reduce our spend on Microsoft products.

Thepmaman1
Helper I
Helper I

I still have not heard back from anyone. I'd like to buy a new PC but I fairly sure perpetual license I have will not install. CAn someone please contact me?

 

I did convert many functions to be standalone and create a config file to allow to run, and compiled to an EXE but I have some very large robots and enjoy using program without all hastle of my newly compiled routines.

 

steve

If you have a valid WinAutomation perpetual license right now that you have installed with a .lic file, you can also install the same .lic file on a new WinAutomation installation on a new machine. There's nothing preventing you to do that.

-------------------------------------------------------------------------------------------------------------------------
If I have answered your question, please mark it as the preferred solution. If you like my response, please give it a Thumbs Up.
Regards, Agnius Bartninkas

Helpful resources

Announcements

Celebrating a New Season of Super Users with Charles Lamanna, CVP Microsoft Business Applications

February 8 was the kickoff to the 2024 Season One Super User program for Power Platform Communities, and we are thrilled to welcome back so many returning Super Users--as well as so many brand new Super Users who started their journey last fall. Our Community Super Users are the true heroes, answering questions, providing solutions, filtering spam, and so much more. The impact they make on the Communities each day is significant, and we wanted to do something special to welcome them at our first kickoff meeting of the year.   Charles Lamanna, Microsoft CVP of Business Applications, has stressed frequently how valuable our Community is to the growth and potential of Power Platform, and we are honored to share this message from him to our 2024 Season One Super Users--as well as anyone who might be interested in joining this elite group of Community members.     If you want to know more about Super Users, check out these posts for more information today:    Power Apps: What is A Super User? - Power Platform CommunityPower Automate: What is A Super User? - Power Platform Community Copilot Studio: What is A Super User? - Power Platform Community Power Pages: What is A Super User? - Power Platform Community

February 2024 User Group Update: Welcoming New Groups and Highlighting Upcoming Events

It's a new month and a brand-new year, which means another opportunity to celebrate our amazing User Groups!Each month, we highlight the new User Groups that have joined the community. It's been a busy season for new groups, because we are thrilled to welcome 15 New User Groups! Take a look at the list below, shared by the different community categories. If your group is listed here, give this post a kudo so we can celebrate with you!   We love our User Groups and the difference they make in the lives of our Community! Thank you to all the new User Groups, new User Group leaders--we look forward to hearing about your successes and the impact you will leave!   In addition to our monthly User Group spotlight, it's a great time to share some of the latest events happening in our User Group community! Take a look at the list below to find one that fits your schedule and need! There's a great combination of in-person and virtual events to choose from. Also, don't forget to review the many events happening near you or virtually! It's a great time of year to connect and engage with User Groups both locally and online. Please Welcome Our NEW User Groups   Power Platform: Heathcare Power Platform User Group Power Platform Connect Hub Power Platform Usergroup Denmark Mexico Norte- Power Platform User Group Pune Power User Group Sudbury Power Platform User GroupMicrosoft User Group GhanaMPPBLR - Microsoft Power Platform Bengaluru User Group Power Apps:   Myrtle Beach Power Platform User GroupAnanseTechWB PowerApps Copilot Studio: Pathfinders Power Platform Community Dynamics365: Cairo, Egypt MSD 365 Business Central/NAV/F&O User GruopMS Dynamics 365 Business Central LatamCincinnati OH D365 F&O User Group February User Group Events February 2024 Cleveland Power Platform User GroupPortallunsj - Februar 2024Indiana D365/AX February User Group MeetingQ1 2024 KC Power Platform and Dynamics 365 CRM Users Group 

January 2024 Community Newsletter

Welcome to our January Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members. If you're new to the Community, please make sure to follow the latest News & Announcements in each Community and check out the Community on LinkedIn as well! It's the best way to stay up-to-date in 2024 with all the news from across Microsoft Power Platform and beyond.      COMMUNITY HIGHLIGHTS Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, giving (and receiving!) kudos, and consistently providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, make it your New Year's Resolution to be more active in the community in 2024.   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzWarrenBelzPstork1saudali_25LaurensMPstork1stephenrobertLucas001AARON_ClbendincpaytonSurendran_RANBNived_NambiarMariamPaulachanNikhil2JmanriqueriosANBJupyter123rodger-stmmbr1606Agniusstevesmith27mandelaPhineastrice602AnnaMoyalanOOlashynBCLS776grantjenkinsExpiscornovusJcookSpongYeAARON_CManishSolankiapangelesPstork1ManishSolankiSanju1Fubar   LATEST NEWS Power Platform 2024 Release Wave Highlights This month saw the 2024 Release Wave 1 plans for Microsoft Power Platform and Microsoft Dynamics 365- a compilation of new capabilities planned for release between April and September 2024. Click here to read Corporate Vice President Maureen (Mo) Osborne's detailed breakdown of the upcoming capabilities, and click the image below to check out some of the Power Platform 2024 Release Wave 1 highlights.     "What's New" Power Platform Shorts Series This month we also launched our brand-new 'Power Shorts' series on YouTube - a selection of super sweet snapshots to keep you in the loop with all the latest trends from across the Power Platform and beyond. Click the image below to check out the entire playlist so far, and don't forget to subscribe to our YouTube channel for all the latest updates.   Super User In Training (S.U.I.T) It was great to see the Power Platform Community officially kick off Season One of their Super User in Training (SUIT) program this month! Their first meeting saw an amazing turnout of over 300 enthusiastic participants who started their dynamic journey toward becoming Super Users. Huge thanks to Manas Maheshwari, Eric Archer, Heather Hernandez, and Duane Montague for a fantastic kick-off. The first meeting also saw seasoned Super User, Drew Poggemann, share invaluable insights on navigating the #MicrosoftCommunity with finesse. Many thanks to Drew for setting the stage and emphasizing the importance of active engagement and the art of providing thoughtful community solutions. If you want to learn more about the features and benefits of gaining Super User status, click the image below to find out more, and watch this space for more info about Season Two and how you can SUIT UP in the community!     UPCOMING EVENTS Microsoft 365 Community Day - Miami - February 1-2, 2024 It's not long now until the Microsoft 365 Community Day Miami, which will be taking place at the Wolfson Campus at Miami Dade College on 1-2 Feb. 2024. This free event is all about unlocking the full potential of Power Platform, Microsoft 365, and AI, so whether you’re a tech enthusiast, a business owner, or just curious about the latest Microsoft advancements, #M365Miami is for you.   The event is completely free and there will sessions in both English and Spanish to celebrate the vibrant and diverse make-up of our amazing community. Click the image below to join this amazing Community Day in Miami and become a part of our incredible network of learners and innovators!     Microsoft Fabric - Las Vegas - March 26-28, 2024 Exciting times ahead for the inaugural #MicrosoftFabric Community Conference on March 26-28 at the MGM Grand in Las Vegas. And if you book now, you can save $100 off registration! The Microsoft Fabric Conference will cover all the latest in analytics, AI, databases, and governance across 150+ sessions.   There will be a special Community Lounge onsite, interactive learning labs, plus you'll be able to 'Ask the Experts' all your questions to get help from data, analytics, and AI specialists, including community members and the Fabric Customer Advisory Team. Just add the code MSCUST when registering for a $100 discount today. Click the image below to find out more about the ultimate learning event for Microsoft Fabric!     Microsoft 365 Conference - Orlando - April 30 - May 2, 2024 Have you added The Microsoft 365 Conference to your community calendar yet? It happens this April 30th - May 2nd in Orlando, Florida. The 2024 Microsoft 365 Conference is one of the world’s largest gatherings of Microsoft engineers and community, with a strong focus on Power Platform, SharePoint, Azure, and the transition to an AI-powered modern workplace.   Click the image link below to find out more and be prepared to be enlightened, educated, and inspired at #M365Conf24!   LATEST COMMUNITY BLOG ARTICLES Power Apps Community Blog Power Automate Community Blog Copilot Studio Community Blog Power Pages Community Blog Check out 'Using the Community' for more helpful tips and information: Power Apps, Power Automate, Copilot Studio, Power Pages  

Super Users 2024 Season One is Here!

   We are excited to announce the first season of our 2024 Super Users is here! Our kickoff to the new year welcomes many returning Super Users and several new faces, and it's always exciting to see the impact these incredible individuals will have on the Community in 2024! We are so grateful for the daily difference they make in the Community already and know they will keep staying engaged and excited for all that will happen this year.   How to Spot a Super User in the Community:Have you ever written a post or asked for help in the Community and had it answered by a user with the Super User icon next to their name? It means you have found the actual, real-life superheroes of the Power Platform Community! Super Users are our heroes because of the way they consistently make a difference in the Community. Our amazing Super Users help keep the Community a safe place by flagging spam and letting the Community Managers know about issues. They also make the Community a great place to find answers, because they are often the first to offer solutions and get clarity on questions. Finally, Super Users share valuable insights on ways to keep the Community growing, engaging, and looking ahead!We are honored to reveal the new badges for this season of Super Users! Congratulations to all the new and returning Super Users!     To better answer the question "What is a Super User?" please check out this article: Power Apps: What is A Super User? - Power Platform CommunityPower Automate: What is A Super User? - Power Platform Community Copilot Studio: What is A Super User? - Power Platform Community Power Pages: What is A Super User? - Power Platform Community

Did You Attend the Microsoft Power Platform Conference in 2022 or 2023? Claim Your Badge Today!

If you were one of the thousands of people who joined us at the first #MPPC Microsoft Power Platform Conference in 2022 in Orlando--or attended the second-annual conference in Las Vegas in 2023--we are excited to honor you with a special community badge! Show your support for #MPPC Microsoft Power Platform Conference this year by claiming your badge!           Just follow this link to claim your badge for attending #MPPC in 2022 and/or 2023: MPPCBadgeRequest    Want to earn your badge for 2024? Just keep watching our News & Announcements for the latest updates on #MPPC24.

Microsoft Power Platform | 2024 Release Wave 1 Plan

Check out the latest Microsoft Power Platform release plans for 2024!   We have a whole host of exciting new features to help you be more productive, enhance delegation, run automated testing, build responsive pages, and so much more.    Click the links below to see not only our forthcoming releases, but to also try out some of the new features that have recently been released to market across:     Power Apps  Power Automate  Copilot Studio   We can’t wait to share with you all the upcoming releases that will help take your Power Platform experience to the next level!    Check out the entire Release Wave: Power Platform Complete Release Planner 

Users online (2,158)